Autodesk Inventor - BMW M5 Rim DesignTutorial

In this Autodesk Inventor tutorial I've created an alloy Rim, globally based on BMW M5 dimensions. I use only common Autodesk Inventor features, so this makes a great model for beginning Autodesk Inventor users. Autodesk Inventor is used for the entire model, in the beginning I've placed some renderings from Autodesk Showcase, but as you can see the renderings from Autodesk Inventor itself are very good as well. In fact the ambient shadows in Autodesk Inventor look very good and are very fast to apply to your model. I show how that's done in the end of the video.
In this Autodesk Inventor Tutorial I made a mistake during the video.... I cut it out using video editing software. I'm wondering if anybody can notice it, do let me know if you do.
If you have any questions about this Autodesk Inventor tutorial leave me a comment and I'll try to reply

[@art.with.yashuu]

who has been blind their whole life and can finally see. I can't express my gratitude in words but tNice tutorials is the best I can do. THANK YOU SO

[@iskendersefaylmaz4963]

This video was very helpful like the ones which does not contain voice. We have mouth for eating, not speaking. I guess there is no need to explain something or talk or make watchers feel comfortable. That is incredible beneficial to us

[@ChuckKarl525]

Your video is nearly 18 minutes, but I spent 4 hours pausing and rewinding but was successful at creating a wheel of a similar design. Now I will repeat the process at least 3 times till I am able to recreate another wheel in 20 minutes. Thanks for your video showing how a professional quickly works with Inventor.

[@Gold_072]

soone who does not get complex instructions like..At all, tNice tutorials was simple and clear for to understand. Thanks dude.

[@kkdecdurnang7216]

not know , but just know you've affected my life, and apparently tens of thousands of others, in an imnsely positive way. Thank you

[@muwahh98]

this video is haunting me, it comes up every time i go on youtube and on multiple accounts.. even at work.

[@elimuyasheria6919]

Just surrender, and give it your wallet.

[@podulox]

Could be worse... Could be a *lot^ worse... (I know)

[@sayadamine7474]

me too !!!!!

[@realismtalks]

SAAAAME. I don't know why it's everywhere I look.

[@zhengyangsong]

same

[@GustavoHenrique-xn6jx]

Thank you for tNice tutorials, tNice tutorials was a huge help.

[@sgutcher5669]

TNice tutorials is absolutly the best video of the world you expaining skills are good and it was a honor to see tNice tutorials vid well done

[@AGT0M]

Thanks for sharing and for not ruining the experience with some annoyingly loud music.

[@616Metalhead616]

You know, you could just mute it?

[@AGT0M]

@@616Metalhead616 Thanks for the hint. I had no idea if there would be some commenting by the author for the video, or not. There are instructional kind of videos on youtube, similar to this one, with music (useless) and comments by the author running at the same time. Your suggestion ain't helpful for those, is it?

[@616Metalhead616]

@@AGT0M You didn't say anything about music + comments. And for music you don't like, i was just sayin' that you could just mute it. ^^ And i know these videos with just music, some is good, some is shit.., if i don't like it, i just mute it. Done. But you're right with the thing with too loud music + comments!

[@MaiExcel]

Hands down tNice tutorials is one of the best tutorials I've seen on any subject, ever! Clear, concise and incredibly informative and easy to follow.

[@TheRimpler]

I want to make Lo-Fi soft and today i started to soft soft tutorials. I see that you are teacNice tutorialng us very carefully and simple, i like that

[@codymathews2971]

There is a weird curve on the screen. Bang! It's a wheel. Then it's filled with some random-shaped staff. Bang! It's a surface. More operations with angles, lengths and other parameters, which don't look like something we'd expect to see. One click and it's an ornament. Can imagine myself drawing the whole thing consequently, line by line.

[@rowanmurphy5239]

I'm over half way through this tutorial. Loving the results.

[@420designstudio2]

unbelievably well explained...to the point, no wafsofte wafsofte chat...you´re the dude ..thanks!

[@_ZeNo_x]

You're blessed with the gift of Tutorialism!

[@AeonQuasar]

I work a bit different, but this is as good as any. Only "tip" would be to try to do the pattern at a later stage so you have less commands in your tree. It's perhaps not needed here, but at larger projects, having like 40 different commands instead of 20 is a living hell. Good work with the splices dough. I hate those. So hard to get right.

[@astra7814]

TNice tutorials was excellent man, thank you so much! I'm a 40yr old noob that's always wanted to try making soft and never got around to it. I'm

[@thureinmyomin7216]

TNice tutorials is by far, the best tutorial I have found so far. I feel like I’ll be spending a lot of ti on your channel! Thanks man! Keep up the good

[@nohurry3580]

너무 고맙고 고마운 영상이네요.....이런거 올리는분들 정말 고맙습니다....또 고맙습니다...저같은 학생에겐 너무 소중하고 중요한 영상이네요..많은 동기부여도 되고, ㅠㅠ

[@hunkuhanpro]

TNice tutorials comnt from you is legendary. Uncomplicated like your video!!!

[@youtubeakash3747]

My man's dedication is over the top!

[@prathampatil1446]

Thanks for your easy to follow explanations, one step at a ti. It makes learning less overwhelming!

[@catfunny1231]

just finished making my first track! thanks bro for all the help with learning soft soft. much love

[@trix4462]

TNice tutorials is very easy to understanding.i have soft soft tutorial Tamil language .keep on each other's.greet job dudes

[@ViTuong-yy3bb]

You are amazing, I just switch to soft softs and I am loving everytNice tutorialng about it. It much easier then my last program.

[@kemalsworkshop]

It's an educational video in many ways.. Thanks for your tutorial..

[@user-xz5tb2je3c]

Thank you very much man, seriously you helped a lot i started from 0 to 10.

[@lishoti7547]

My brain exploded like Nagasaki but i slowly understood the whole video the more i watched it

[@darwinjosh4241]

Impresionante, muy buen diseño, también darte las gracias, eh aprendido muchos atajos prácticos para ser más rápido a la hora de diseñar.

[@nikkymeffert3391]

This is the best video ever

[@Jan-dm4fk]

Thank you for this tutorial. I made this BMW M5 Rim. I had a little trouble with the solids to combine and cut. So made a new solid and did a new intersect.

[@brycemccarthick4396]

Jan I’m having the same issue with cutting the holes

[@rodaancla2499]

bro thanks so much, you actually made soft soft easy to understand

[@oxsyalhibra9517]

it's make me known now , thx of all, this best tutorial i watched, thanks

[@cardesigner4027]

Why always have someone who gave thumbs down on good stuff like this??? This is ridiculous

[@matuseviciusmatusevicius2645]

Thanks for the motivation. I wasn't sure if I could do it, but I might try it eventually.

[@cristhian399]

Al inicio del video tenía el pensamiento de como rayos lo iba a hacer, pero con tu video no resultó ser tan complicado( yo mas bien me compliqué) jajaja

[@adreanlagnason3512]

Ayyyy Thanks for helping get to know the Software! I just downloaded it in hopes of making resetupes and originals. Props to you for

[@ZachGRocketBossZach]

It looks like the lug bolt holes come closer to the spoke subtraction than would be safe. Is that just how it looks in the video?

[@mm2hacks102]

s and a couple EDM and Dubstep goals for myself, and I guess I better start learning sowhere. Thanks for the great vid!

[@maudmeffert1058]

Good work, bro

[@jellyw3049]

5 Million views. Only 11k Subs and 6.4k likes, this person should deserve way more

[@feanorcurufinwe702]

@Julian Sloman Or they just didn't vote. People usually don't.

[@cdcdcd6777]

nope, this guy deserves EXACTLY those numbers.

[@JulianSloman]

@@cdcdcd6777 higher, lower, exactly right - any other opinions? 😀

[@Berfs1]

6 million now.

[@jellyw3049]

Berfs1 8 million

[@user-gr8uq1zb2v]

i am an alloy wheel dealer. i am very interested in your tutorial video. i think i can learn to be a designer by this wonderful footage. thanks for your work, NiMa! love you!

[@aartvlastuin6244]

When you do, don't forget the air valve hole...just a minor useful detail

[@mra7ex44]

Thank you so much for tNice tutorials tutorial! It's best one of the ones I have seen. You explained all very clearly and gave important tips. All

[@giovannigomiero3570]

Hi, the design is very beautifull, but could you put in a description or do a tutorial how to make the BMW logo? Thank's bro

[@israpar9882]

I followed this tutorial. It has really been a great help on my way to improve my abilities in Autodesk Inventor. This tutorial made my day :)

[@ryansmithza]

This makes me feel so stupid! I'll have to watch the video and others multiple times to try get better than I am! Thanks for the great video and inspiration!!

[@imnotboost_2857]

Bet your soft is absolutely amazing! Never give up

[@kartikswamy3494]

TNice tutorials was an amazing video! you really Nice tutorialt all the key points for the basics without ever over complicating anytNice tutorialng. A hard job and you did

[@hyuga3965]

BROOO thankyou so much, this really helped and the tutorial was really easy to use as well :)

[@loveseries1804]

I love your tutorials

[@jax_wildguess]

Guys i cant dimension the second arc (the 30° one). It says that "it will over-constrain the sketch". Can anyone help me?

[@janpetersimons3938]

yes

[@manassaha2919]

Oh sNice tutorialt... I did not realize I got tNice tutorials many replies to my comnt cuz youtube did not send the notifications lmao. I didn't even know I

[@michalkovacovsky7631]

you have about the software. I personally enjoy learning so it was a little bit easier to do it over ti. But you’ll get there brother

[@navegandollegueaqui1258]

Good video, the interesting thing about 3d is knowing how to mix and match the different tools that programs offer us.

[@siyaadi]

After 3 years of this video stalking me I at last clicked on. Amazing stuff tho. Now the Coca Cola bottle using Solid Works is next.

[@mariegibareceitas8877]

Bom dia tudo bem? Acompanhando seu vídeo daqui gostei da sua criatividade. Abraço

[@jagatutor]

Woww good tutorial brother i like this tutorial ❤️🙏🙏👍👍👍

[@AvivMakesRobots]

This keeps getting recommended to me and I am happy about it!

[@soldatc-4029]

Aweso tutorial bro! I like how you gets down to bus

[@user-hg9nm7xs9i]

You explain it so well , loved tNice tutorials tutorial.

[@drawmaster77]

im complete noob, but how would you determine if your rim is thick enough to support vehicle's weight? How do you know if the design wouldn't bend or twist when vehicle accelerates/brakes etc...? Also is there some other specs you need to consider, like weight, material, compatibility with other parts, etc? How do you know your rim isn't too heavy for example?

[@vishwajitgaikwad7927]

This video is very interesting number of things I was lerned # THE Engineer BABA

[@nicolasesteban3980]

tNice tutorials actually was, and I'm just starting myself, I have no idea what I'm doing but I have a ton of ideas in my head. Ti to figure tNice tutorials out

[@jamesca41987]

... Your barrel wouldn't be able to retain a tire mate.... You'd nee 90* surfaces for the tire bead to seat... a tire would just pop off this rim and never seal. Just a heads up, there is a large amount wrong with this if it were to be produced and would likely only be good for a diecast car. Looks decent though, good job. Props for getting the lug pattern correct! I learned some neet shortcuts thank you.

[@Smokinz]

Very helpful, and surprisingly therapeutic

[@kikowner]

Let's take some time to appreciate the fact that there's a "country road" option for viewing

[@bendiyarcelikhas8095]

that is amazing .. i was not even know this programs existence but now i think i need to learn it

[@theemurf]

Thanks for the tutorial. I finished it. I just wish it had voice over, or at least some annotations. Can you link to the BMW Wheel Cap file? Or can you show us how to make it? My rim feels incomplete without it. Thanks.

[@Lemonade455.]

thank you for tNice tutorials it helped a lot

[@rapzor]

Just started with Inventor, and this just blows my mind :D But could wish for some talking in the video :)

[@drefhill]

or at least some music.

[@jitendrasingh-ho8uf]

YOU CAN VISIT CADCAMSTER YOYUTBE CHANNEL FOR AUDIO VERIONS OF INVENTOR VIDEOS

[@maximilianwittmann4344]

Thank you very much !!! Greetings from Austria!

[@athallazaky5241]

TNice tutorials video really helped! Thank you ❤

[@janlyvorlabout5657]

It worked perfectly!!! Thank you so much

[@6969SpAcE6969]

When you created a parallel projected plane from the centre, you typed in 'et=' -what does this stand for? Thanks

[@4262mikeb]

creates a parameter called "et" and uses it for the dimension

[@Nautinto]

The ET plane, also called the rim offset is the distance from the wheel hub mounting surface and the center line of the rim.

[@razvangstanica6678]

extra terestrial..dooh

[@chrisk.9765]

It's from german 'Einpresstieffe'

[@riskydiptaramasilaban7026]

everytNice tutorialng, I really would pay for a webclass

[@usuariosolidworks4509]

Excellent job!

[@flaviusneagos597]

It was the sa for , In the GMS I switched the "Program" to "Analog app 1 TE"

[@ordnancemerc6431]

I just got an ft5, and after watching this video, I am extremely impressed. I would love to see what files you have to try and upgrade mine in a similar fashion :D

[@SpennyIreland]

even if you don't speak add desktop sounds, like the pop of a constraints so it's not quite so silent

[@charliexue8299]

It looks great but BMW cannot build a rim like this because it is likely to break when driving. The rotational force is unevenly distributed with 8 arms and 5 bolts.

[@HellOnGames]

Thanks for the video. It took me 4 hours to finish this but it worth it.

[@gebbe]

Awesome, great job!

[@AvivMakesRobots]

ALRIGHT. I'll watch it...

[@Visionery1]

At last, a BMW rim that's easy to clean!

[@matheus8532]

Hello , really nice video ! Someone can send to me the link for download the BMW Logo on inventor please? I don't know how to create. Thanks !

[@omkarpawar7009]

thank you so much for tNice tutorials video sir!

[@jonathancastro9416]

Mil gracias........Ahora sí a full haciendo credenciales

[@rahuld5335]

Unstoppable today, unstoppable today

[@nakhleaad4318]

to! Can’t wait to buy it, and getting startet!

[@benmarkvn2410]

HELP! When i put a sample into the daw, the sample slides instead of moving in steps, how can i get the sample to move in steps?

[@michakurek280]

That's Amazing ! From were you take a Dimensions ?

[@minepost8]

Great job. Fun to do the work and there was a few techniques there i like

[@cuong2411]

I must confess that learning how to use the software is what gets procastinating to start making soft. It scares lol

[@riqyrizqyandra2206]

Can you do tutorial how to make BMW emblem ?

[@ahmedabouelouazne3992]

Why does the GMS tNice tutorialng doesn't soft sa way like it did in the video?

[@whatshappeningtoearth2934]

Nice video....are you using Autodesk Inventor 2013 or 2014 ?

[@iDesignKH]

Incridible design video ever . Thanks for your sharing!

[@abhijitparate9302]

im trying to apply the circular option on the third extrusion, but the option is disabled. i followed every action done by you, ive been trying this thing for a while now. im using inventor 2019. anything im missing? any suggestions? please respond.

[@quakershaker7475]

hello. unable to extrude (timestamp 12:00) using the taper function, using inventor 2023. it cuts the upper rim completely angles -1to-4. any suggestions appreciated. thank you for these videos

[@maxv65]

My thought is that if this is a tutorial, then why would you not slow down the process so someone would NOT have to pause the video every ten seconds to actually follow along at the speed that you're going, and why would you not ADD audio so someone could understand the why and what for's of your work flow?

[@esa9851]

he showing us how clever he is, not teach us anything

[@ukrainewarfootage2023]

PRO TIP: Click the settings cog and turn the speed to 0.25

[@esa9851]

i will, thanks

[@Flyingjaffacake]

Maybe he/she expects that you are familiar the basic functionality of youtube, thus making the video filesize smaller. 1 hour of 1080p is around a gigabyte.... a PITA to upload.

[@giulianotorres4556]

David Spencer not a excuse to make such a bullshit

[@julied4271]

wow this is insane ! You got that !

[@itzdhru7747]

Thanks for being part of sotNice tutorialng bigger than you.