Autodesk Inventor tutorial V12 engine | Ep 05 Full HD 😍

[@son_of_an_engineer]

hello Ammar! I can't see episodes 04, 06, 13, 16, 18, 22, 24, 27, 29, 30, I'm from Poland. What I should do ? if it is to buy when i can pay for this episodes ? Thanks for this tutorial ! :D

[@matthewchurchill4225]

Love the tutorial! Keep it up

[@aaroneddywonhasagawa2737]

Most excellent Mr. Ammar. Thank you for your insight and professionalism. Looking for more good stuff from your desk.

[@jorgefrp90]

Good job Ammar. Great way to learn to use Inventor, doing this kind of projects. Please keep doing another Inventor projects.

[@ghassanghannam6049]

Thank you K. Ammar for the excellent work. I've been waiting for this.

[@AmmarKhelifaoui]

+Ghassan Ghannam thanks for you too brother , please share it in your facebook :)

[@krisztiannagy7619]

your videos are bad. you don't explain anything, you are just speaking about what you are doing at the time, like "now draw a line", "make this", "make that", "click here". people can't learn from you, they just follow your cursor and copy your movements. but that wouldn't be a problem if you wouldn't ask money for some episodes. you are on the f....ing youtube. just make money with ads.

[@nurdemerassung7682]

I totally agree. At first I wasn't able to see it that way I really thought that its just his way of doing it, not until I found out that some episodes are needed to be purchase. I won't waste php 560 for that crap. Shame on you kammar, money hungry greedy creature. You suck dude you really do.

[@larafelix2197]

Hello Mr. Ammar why you use in 12:48 minute the option Clearance hole and not other

[@ianliu284]

Thank you, K. Ammar, to share this fantastic demo. For the engine's front view, do you have a fully defined dimension?

[@AmmarKhelifaoui]

Hi there , and thanks for your comment, nop , I share only the 3d modeling , so there are some episodes are not for free , please find it on my website kammar9.com/store , if you like to download the whole engine stp you can find it also there

[@pastoradrianvicuna7451]

EXCUSE ME AMMAR, DID YOUU FORGET MAKE RECTANGULAR SEQUENCE WITH THE HOLES MADE IN 22:40 and 25:30 FOR THE REST OF THE CIRCLES? OR THOSE INTERN HOLES ARE ONLY IN THE FIRST TWO?

[@lubosfabian2629]

Hi Ammar please tell me why u copy the sketches for extrudes... i think that mirroring extrusion is much more faster way ... thanks for answer

[@angelohila6407]

Hi is there an episode 6?Is the only one I couldn't find in your channel

[@AmmarKhelifaoui]

Hi , you can find all on my website, thanks kammar9.com

[@backdrop1123]

Great Work!!!!

[@khornedoosan]

Awsome tutorial thanks man !!!

[@AmmarKhelifaoui]

Maciej Dobrowolski thanks please share it

[@AmmarKhelifaoui]

+Maciej Dobrowolski thanks

[@TC2TN]

Many thanks for sharing. We can not watch 4th and 6th videos from Turkey. Do you have the ability to reload them?

[@AmmarKhelifaoui]

+Tacettin Alacakoç hi there . Big Thanks to turkish people. I find a solution for you . In youtube i cannot add turkey to the list the you can change the parameters in your youtube juste follow this tutorials .and wait for 2 to 3 days . Choose usa or france . Remember the episode are paybale ! Thanks kzbin.info/www/bejne/g6XQYYqufbNnrck

[@TC2TN]

thanks

[@naimlahmami5750]

Hello Ammar, your tutorial is amazing, thanks you, but, I wanna ask: ¿Where is the episode 4 and 6? I hope you can answer me

[@AmmarKhelifaoui]

Hi Naim , thanks for your comment, to support the channel I made some paid episodes, so you can find all on my website kammar9.com thnx

[@sebastianrojasbotina2874]

Can you help me watch episodes 4 and 6 for free please, I can't buy them, they are very expensive, thanks, designers help each other

[@sebastianrojasbotina2874]

Or if you have the plans, you can share them with me, I would really appreciate it ❤️

[@brunodavila2531]

i cant see episode number 4 :( im from uruguay it says that episode 4 is not available for uruguay

[@nanangmr20]

Thanks for sharing your excellent tutorials, but I'm still curious about transparency in inventor, how can I make a part transparent?

[@fitrahendi2759]

Thank you very much K. Ammar. its verry useful. Where is the video episode four and six??

[@AmmarKhelifaoui]

these are paybale videos. thnks very much

[@rowanmurphy5239]

@@AmmarKhelifaoui where do I pay for then and how much?

[@AmmarKhelifaoui]

@@rowanmurphy5239 hi there and thanks for your comment. That's my website kammar9.com 🙌 enjoy it

[@einar5367]

Why do you use Inventor insted of fusion? What's the difference between them? I use fusion 360

[@martinreingruber6239]

Great Videos, but where can i find the missing episodes ? i´m from austria...greetings

[@AmmarKhelifaoui]

+Martin Reingruber ok man i ll fix that for you

[@martinreingruber6239]

Thanks, for your fast help. Is it possible to make a car design tutorial with inventor? I have begun to make an Audi RS3 Sedan and I can send you my using blueprint. Especially to implement the V12 :) thx

[@AmmarKhelifaoui]

ok , I would like to make this , thanks , find my Email in the end of the tuto

[@martinreingruber6239]

Hi again, nothing happened. I can't see them here in 🇦🇹

[@christianfailla4281]

hello, I have a question, you can redo the video 4 is not available, even on your site

[@AmmarKhelifaoui]

Hi there , thanks for your comment , so you can download it from my website kammar9.com/store enjoy it .

[@pastoradrianvicuna7451]

Ammar. . . You are awesome!!!!

[@AmmarKhelifaoui]

+Pastor Adrian Vicuna thanks so much

[@dr.ballaanitaugyved9997]

Hi Dear! When we going to continue this project? :) in other word... if you continued yet this tuto, please send me a link from that, because i dont find nowhere...:( thank you very much. Best regard :)

[@AmmarKhelifaoui]

+Anita Dr. Balla juste wait ,;)

[@IlhamDefraN]

im currently workiing on v12 too, but mine is 90 degree v angle, more tight/compact block, larger displacement (7,2 L) and undersquare configuration (wider bore than stroke length)

[@powerpalaysmr8081]

hy ammar I can not see the episode 4 in Portugal can you abilite the contry please thanks and good joog man

[@adhamtalal1926]

Where are the episodes 4 ,6 ,13 ,16 ,18 ,22 ,24 ,27 ,29 ,30 I can't find them. Can you help me ,please?

[@gouravkhanra1375]

Thank you soo much sir.it will help me lot.

[@rubennoriega9871]

Hello, how are you? Hey, I have a question, where is the cap4?

[@AmmarKhelifaoui]

Ruben Noriega hi there bro . Go to my website www.kammar9.com then under store you will find episode 4

[@rubennoriega9871]

khelifaoui Ammar Hello Kamar, thanks for sharing your knowledge. I have been following along recently but find that I don’t have access to some videos. Can you provide an alternative link?

[@Ray4Fun]

good job !

[@legal_lala]

Can you upload the blueprints from which you are making such a great V12 engine?

[@stephenlepek3516]

What is the length of the line that goes vertical after the first line that is 120mm's? I'm on episode 5 placing the holes for the water pump and I don't have enough clearance for the top hole, I think its from that dimension that I'm asking for the measurement. Thank you.

[@frankbooth8003]

The 2 diagonal lines are in 90 degrees relation with eachother. The vertical line automatically becomes 62.846mm.

[@shawnharris5734]

im having the same issue, he doesnt specify anything that restricts that dimension

[@shawnharris5734]

nevermind if it isnt constrained, you probably didnt select the middle of the line with that diagonal construction line he creates. thats what i was missing.

[@angelohila9800]

Hi so I paid for the monthly subscription but its still asking me to pay for the single course?

[@AmmarKhelifaoui]

Hi , thanks for your subscribtion, you have to be logged in, and when you are in the courses just click on the first episode of the courses and you are done

[@serhiykarpyak7603]

Hello. What distance should be between the cylinder to the piston?

[@jacksonjanney1302]

The piston moves up and down in the cylinder

[@Sunwq_edits]

why is the episode 4 locked for my country? 1 to 3 is ok 5 is also ok but cant acces the episode4

[@AmmarKhelifaoui]

Yagmur Davut hi . tell me where are you from bro ?

[@Sunwq_edits]

Belgium and turkey A lot of episodes are blockd like this

[@AmmarKhelifaoui]

Ok . If you are in belgium it's easy . The tutorial is not for free . You have juste to pay to support the channel . If your location is in Turkey you have to tell me to explain to you how to pay . Don't hesitate to contact me

[@Sunwq_edits]

hoy can i pay for support?

[@Sunwq_edits]

can you explain how to pay? in dont find any way

[@staswarner8575]

Do you know if you can 3D print using the autodesk software

[@AmmarKhelifaoui]

+Andrew Warner of corse , I think there are a software destined for this exclusivley

[@staswarner8575]

Because I wouldn't want to make something and then not be able to 3d print it

[@AmmarKhelifaoui]

Andrew Warner ok , when you print it plaise share with us the video and let 'us to see the V12

[@staswarner8575]

I Most defiantly will

[@morrismenanya9059]

Please help. Can't access 4 and 6 videos. From Nigeria

[@AmmarKhelifaoui]

Hi there bro , you can download it from my website www.kammar9.com/store enjoy it

[@Svetlana.Borodovskaja]

Hi, I'm from Lithuania and I would like to buy access to the locked videos. Waiting for your answer

[@AmmarKhelifaoui]

+MsSvetulia hi there bro. I can't find Lithuania in youtube list . But i recommend you to change youtube location to usa ir France . The operation takes about 3 days . Then you can use credit card to buy it . Thanks in advance

[@AmmarKhelifaoui]

Hi there bro , so for that I create a nice shop in my website , you can purchase some of them here www.kammar9.com/index.php/store/ Please contact me if you have any quastion

[@1993fayad]

where can we get the pdf files of the models with all dimensions?

[@AmmarKhelifaoui]

+fayad ibrahim you can't find it ! because it's an innovation from me , that's all ;)

[@1993fayad]

Ok. Great work

[@rowanmurphy5239]

Missing dimensions to recreate what he has made: Long vertical line: 221.57944 mm Short vertical line: 62.8461 mm Upper horizontal line: 44.21316 mm I took a screenshot and recreated the image as best as I could with lines and measured the angles that were missing. It turns out that the line that is 214 mm long is at 60° relative to the line that is 120 mm long. And the line that is 145 mm long is 150° relative to the line that is 44.21316 mm long. From there I then simply measured the three lines accurate to five decimal places. I hope this helps. I was having no look before I did this. All sorted now though.

[@AmmarKhelifaoui]

Please you can send me a message on Facebook it to easy to resolve it see the description

[@rowanmurphy5239]

@@AmmarKhelifaoui I think we're okay. These dimensions I have supplied will work.

[@AmmarKhelifaoui]

@@rowanmurphy5239 lol , I hope it ll work for you :D

[@ВетомБългария]

Thank you.

[@phavezizzy]

I need to reach you ASAP to get the hidden videos

[@AmmarKhelifaoui]

Hi there man, you can check it out on my website kammar9.com

[@mierenneuker]

Hey man I cant see epsiode phone and alot of others, can you make it available , Im from the UAE

[@arundadhwal5027]

HI I cannot watch episode 4 it looks like its not available in NZ.Can you please provide me the link for episode 4

[@AmmarKhelifaoui]

+Arun Dadhwal hi there. Where are you from please ?

[@arundadhwal5027]

New Zealand

[@AmmarKhelifaoui]

Arun Dadhwal ok This tutorial is not for free . I ll add new Zealand now . wait a sec

[@arundadhwal5027]

Ok thank you

[@AmmarKhelifaoui]

I uplouded it :)

[@benjaminnakale6741]

how do i get episode 4 and 6? and how do i pay for it? any link?

[@AmmarKhelifaoui]

+Benjamin Nakale hi there bro . Where are you from please ?

[@benjaminnakale6741]

I'm from Namibia

[@Antonio-ji7ez]

and why do not you activate 6 I am a student to do a project for the university and I do not have money. Active porfa or control by intern

[@phavezizzy]

How can i get episode 6 please and the rest of the hidden ones???

[@AmmarKhelifaoui]

Hi there find it on my website kammar9.com

[@pitsche65]

Nice one. Is it possible to send the finished engine ?

[@AmmarKhelifaoui]

+Peter Junker thanks. You can find a link in the description of the first épisode. You can download it in solidworks format

[@pitsche65]

Ok , is it the file that cost 320 $ ? I just need the block and maby a piston.

[@superbaracka]

hello, khelifaoui first thank you very much for the tutorial, and one purpose is blocked the nº 5, please I need the video, can you to upload? Greetings from Argentina.

[@AmmarKhelifaoui]

hi there , thanks for the comment , try again it works :D

[@Antonio-ji7ez]

y por que no activa el 6 soy un estudiante para hacer un proyecto para la universidad y no tengo money . Activa porfa o mando por interno

[@AmmarKhelifaoui]

Antonio Lema hi bro . I did not understand. Speak English

[@sokolnushi2149]

It won’t let me create a rectangular pattern of the circles offset

[@AmmarKhelifaoui]

Try to select the good direction

[@ashu_8778]

why does it shows "sketch is overconstrained" when using mirror command ?

[@AmmarKhelifaoui]

I started a new serie just for you ! , that's for begin in inventor I m sharing every week tutorials to improve your skills , that's the link : kzbin.info/www/bejne/iJzYdJyLn5ehoJI

[@thanhthienle6675]

Could you please send to the Video 4 and 6 ?. Because I can't see those two video in my country.

[@AmmarKhelifaoui]

Hi there Bro, Now you can find all missed Episodes on my website www.kammar9.com/store

[@fankinSombrero]

Hello friend.. I can´t see the Ep4 .pls you can ability to my country

[@AmmarKhelifaoui]

fankinSombrero hi bro where are you from please?

[@fankinSombrero]

Perú 😊

[@AmmarKhelifaoui]

fankinSombrero ok man you can buy it then ?!

[@topcz1]

Hello mate, love your videos. I cant figure out how to play episode 4. I already changed my country, but it didnt help.

[@AmmarKhelifaoui]

topcz1 which location you put in the parameters ? the problem came from youtube. there are few country to add :(

[@topcz1]

khelifaoui Ammar Iam from Czech republic and i tryed USA, New Zeland and Denmark.

[@AmmarKhelifaoui]

to change the location you have to wait for 3 day maybe more, look on youtube how to change your location in your compte or parameter , other subsriber tried it and it works ,

[@topcz1]

ok thanks i didnt know that i have to wait for 3 days. Thanks

[@topcz1]

Is possible to get whole model of your Cylinder Block? I work in NX 10. But inventor is also ok. Thanks

[@jonathanrojas562]

Hi, sorry, I recently subscribed to your channel. It will be possible to obtain some episodes of this tutorial, since they appear blocked.

[@AmmarKhelifaoui]

Hi there bro , thanks for the comment , for this reason i add a website , you can puchase what do you want from it , go to the store , i ll send you promo code to download others www.kammar9.com

[@jonathanrojas562]

ok bro thk so much. I m mechanical engeneer and writing you from venezuela. kind regards

[@AmmarKhelifaoui]

Jonathan Rojas good . I hope you will enjoy the tutorial 😊

[@jonathanrojas562]

hello bro, I saw your website, but I like to buy some chapters. How I can do it, you can explain me? Pls, Thk

[@AmmarKhelifaoui]

Jonathan Rojas hi there bro . If you have a paypal account it's too easy. Just click on the button then put your information then enjoy

[@pastoradrianvicuna7451]

Ammar what is the function os CONSTRUCTION COMMAND?

[@AmmarKhelifaoui]

+Pastor Adrian Vicuna constrction command , i think you re talking about ( convert line to construction ) it's just to have reference and make something mirror to other , if you don't turn it like construction , you may be to have problems in the features ( extrusion , revolution ....)

[@carbon273]

whats the purpose of project geometry?

[@inoshdesilva1953]

well it projects the geometry of the sketch. so lets say you got extrusion 1 and you are doing a sketch on top of it and you want to do your sketch with reference to the geometry on your extrusion 1 so you project the geometry of the extrusion 1 into your new sketch that mean you can give dimensions of constrictions from the projected geometry.

[@viniciusmenck986]

Please add Brazil localization, I can't see EP 4, for example :(

[@AmmarKhelifaoui]

Hi there bro, find all on My website kammar9.com enjoy it

[@whitestarliew]

@khelifaoui Ammar, Ep 4 need to pay for it ?

[@AmmarKhelifaoui]

whitestar liew hi there bro my website in maintenance please wait

[@whitestarliew]

ok, please let me know once it is done ya,ty

[@AmmarKhelifaoui]

Hi there Bro, Now you can find all missed Episodes on my website www.kammar9.com/store , enjoy it bro

[@riqyrizqyandra2206]

Where do i get episode 6? Its block. Iam from indonesia Can please someone help me

[@AmmarKhelifaoui]

Riqy Rizqyandra hi there bro . You can find blocked episode here. www.kammar9.com/store . Enjoy it bro

[@wandi_roma25]

where Is the Episode 3 and 4 ? Upload, PLease .

[@AmmarKhelifaoui]

+Wandi Roma Ariyanto I upload EP01 to EP21 , good search in my channal

[@wellingtonrocha9829]

A tecla F7 recorta a peça no plano de trabalho.

[@AmmarKhelifaoui]

thanks

[@wellingtonrocha9829]

de nada

[@DaniloOliveira-gb6dx]

olá wellington rocha, tudo bem você têm algum conteúdo de Autodesk inventur para compartilhar, ou sabe de algum outro canal que posta projetos ?? aguardo.

[@wellingtonrocha9829]

Olá sei sim. E um cara que ensina muito bem a maioria das coisa que sei aprendi no Senai. mas me aprimorei no canal dele "Daniel Severino". Alem do inventor tem muitos outros programas.

[@DaniloOliveira-gb6dx]

há, sim Daniel severino conheço, os vídeos que ele posta é de muita qualidade mesmo. mas muito obrigado.

[@gagandeepmohala8729]

4 episode please upload

[@AmmarKhelifaoui]

Hi bro kammar9.com/store

[@giorgiodandrea9178]

Sorry Where is the Ep 06..?

[@AmmarKhelifaoui]

Hi , the episodes are on my website kammar9.com

[@giorgiodandrea9178]

@@AmmarKhelifaoui 😞😞😞

[@superbaracka]

Sorry khelifaoui I'm wrong in the nº,the one I need is nº4, thank you and apologies.

[@AmmarKhelifaoui]

Mario Fernandez yep all thing is ready now

[@mukeshgautam4431]

Where is episode 4

[@AmmarKhelifaoui]

Mukesh Gautam hi there bro. You can find the episode in my website www.kammar9.com/store Enjoy it

[@林立桓]

Plans can pass me?

[@toti624]

i can´t see the episode 4

[@AmmarKhelifaoui]

HI there bro , go to my website and download it : www.kammar9.com/store/ best regard

[@neelbakaraniya2187]

Hey bro i want see video 4 and 6. And i am from india.

[@AmmarKhelifaoui]

Neel Bakarania hi there bro . You can download it from my website bro . Www.kammar9.com/store Enjoy it bro

[@quinciniho]

You really let me do ep 1-3 then ask 25 euros for ep 4 :(

[@AmmarKhelifaoui]

Hi there bro , I ll make promo this week

[@Antonio-ji7ez]

Por no valenumero 6

[@AmmarKhelifaoui]

Antonio Lema hi there bro . You can download it from my website www.kammar9.com/store/

[@ecksdee1637]

* Forgets to save

[@haddadoumahdi6910]

ya zwizwiz

[@AmmarKhelifaoui]

+haddadou mahdi hhhhh ahya zwizwizz

[@elmisterokanistero7612]

i hate this program. all i can say xD

[@frankbooth8003]

You are probably having lots of problems with the CONSTRAINTS. You should study those in detail. Also find out how to use automatic constraints. OR ELSE, this will cause you too mutch pain and distress and eventually suicide.

[@AmmarKhelifaoui]

I started a new serie just for you ! , that's for begin in inventor I m sharing every week tutorials to improve your skills , that's the link : kzbin.info/www/bejne/iJzYdJyLn5ehoJI

[@nicolasdelanghe5566]

Where is episode 4?

[@AmmarKhelifaoui]

Hi there, check it on my website kammar9.com