Bigger Tires with Bead Lock Wheels AND LESS WEIGHT! Vision F-Manx and 38" Patagonia

[@AutoEdits]

Howdy! Here's an important update for new viewers of this video... I did not like the internal beads for wheel balancing and ended up taking them out and going with traditional static wheel weights. My biggest complaint was that they were inconsistent, fine for several miles and you'd hit a bump and they would be out of whack. I was very happy with the wheel and tire combo!!! Awesome performance overall!!!

[@tanktheram]

Unsprung weight is a KILLER. So many consumers and manufacturers don't even care... yet it is the biggest killer of HP Tq and MPG. Glad you're on the right track!

[@AutoEdits]

Glad you appreciate that!

[@ipdjbt]

I just returned from 5 days of wheeling in Ouray and 9 days of wheeling in Moab. Plus, the 1400 miles each way from my home. My Patagonias performed awesomely!

[@AutoEdits]

I just did 2500 miles and am stoked on them still... 18 mpg and they kicked butt on the rocks!

[@Steelviper61]

Where I live I experience mostly sand and mud. I am curious how the Patagonia's perform in mud and sand? Any thoughts? Thanks!

[@TaTanka362]

AutoEdits so the Co trip is in the can? You mentioned wheelin in Penrose. Camped there en route to Ouray/ Moab last year. Don’t remember name of that park but that was NO JOKE. If same place can’t wait for vids.

[@ipdjbt]

@@Steelviper61 in sand they performed fantastic for me. I have no experience in mud, yet.

[@AutoEdits]

We ran Independence trail and it was pretty scary but fun.

[@roamingtiger]

Next video on the Jeep will be like “Today on autoedits jeep we add new Dana 60 axles on the Jeep”. I’m super jealous man jeeps looking good. Also great job on the channel I’ve been watching since you put 37s on it with no lift. It’s amazing to see how well the channel has been consistent on great quality content with the right amount of information without being boring. Great job bud looking forward to even more videos

[@AutoEdits]

Thank you very very much for this! I appreciate the support.

[@RobMR3]

If both tire and wheel are high uality, you should've lined up the yellow/red dot on the side wall with the valve stem in the wheel. Balancing matrial probably wouldn't have been needed. Been doing that for five yers with the company I'm at.

[@AutoEdits]

Now you tell me...LOL

[@JustTyIer]

I also line up the yellow dot with valve stem. Although usually working with normal factory wheels and a range of tires, still need to be balanced. Never really knew if it was a legit thing, I've just been told it helps and its not hard to do it so I do it

[@davidporter5111]

Airsoft pellets inside the tire will rebalance them every time you get over 35mph

[@zman92630]

@@davidporter5111 yeah, that's a great way to do it.

[@Skitter302]

On the next episode we learn more about axle repairs XD :P

[@AutoEdits]

That is a distinct possibility! 😂

[@fwschnaar3179]

Jason has already Spun His Axle Tube because of ... He knows what’s coming with the “ I Need Bigger Tires Syndrome! 😝

[@Hay-tn6hz]

Hahaha, that was funny.

[@jthor8373]

I know many people like that the Patagonia MT is lighter but it comes at a price. They have thinner sidewalls. The weight savings didn't come from a special treadwear compound. Overall I do like the tire but I do believe that a heavier tire is a testament to how well it's made.

[@knuckles55790gmail]

I'm surprised there wasn't a clip of you cleaning the tire carrier before installing the new wheel and tire. I always enjoy how you take the extra time to clean off areas on new installs. Love your videos man !

[@AutoEdits]

Ha! I shot that part but didn’t want to bore everyone but you betcha I did do some cleanup.

[@peterfalkner390]

My experience with the balancing beads - they worked just fine however they played havoc with the valves when airing back up.....and that was with the special valves. Pretty much always had to remove at least one valve completely and reinsert it to clear it from sticking. I returned to regular weights after a few months.

[@AutoEdits]

I'm curious if this is how I'll go as well but thought to try... thanks for the input!

[@rclem23]

The kmc wheels have two valves per wheel so you always have an alternate valve that isn't pointed into the pool of beads. You can also drill and add a second valve to any wheel.

[@peterfalkner390]

That should be a great help. When I experienced blockage the valve position appeared to be random positions. Maybe bad luck? 1 in 4 valves would stick, again random.

[@rclem23]

Peter Falkner possibly, I have the valve stem filter and have yet to have an issue.

[@05EVORS]

The yellow dot is supposed to go where the valve stem is FYI you were 180deg off with it. Probably not a big deal but If anything doing that also communicates to others you know wassup w mounting tires. Learned that working at Discount/Americas back in the 90s

[@casperscustoms1578]

I did the tire bead thing with my beadlocks, but saved some money by using plastic airsoft BBs. I looked online to see how much weight I should use and came up with 10oz for 37s. been supper happy with the beads and will do the same for all my tires from now on.

[@AutoEdits]

Great suggestion!

[@KammTheTrainer]

How is it on daily driving/highway driving with the beadlocks ?

[@casperscustoms1578]

@@KammTheTrainer they are great. Never had any issues from the balance. Even after tearing up the lugs they went down the highway fine. Only down side is you can hear the BBs hit the rim as you come to a stop.

[@jclee0314]

man, the second pass you did without marking each time is impressive. I always get lost on which ones I have done already, and hit the same one many times to double check. started using a chalk pencil for a quick mark and it helped

[@AutoEdits]

That's a great tip!

[@mikeecasarez4471]

Thank you for all your input, tips and just everything else! I'm new to the JK world! Just got me a 2016 jk sport 4 door. I'm loving it! Definitely have some plans! Thank you again! Still have more videos to catch up on!!

[@AutoEdits]

Glad to help! Keep watching!

[@imemovengeance]

I cant decide between the MAXXIS RAZR's or the Patagonia's. I hated the look of the Patagonia's at first but after watching all the great YT videos on them they grew on me.

[@AutoEdits]

Same for me! Seriously, I was slow to come around because they look very ordinary but the performance is next level on road and off... so I'm stoked on them.

[@imemovengeance]

@@AutoEdits Looking foward to watching a review video if you do one

[@jamesonmiller9567]

Great video on these beadlocks. I have the 35 inch Pats wrapped on procomp 1069 alloys. These beadlocks are only about 4 lbs heavier than mine per wheel. I’m looking for beadlocks and loved the machined look of these - but of course they are sold out everywhere. I can only find them in black and that’s so 2010...lol.

[@AutoEdits]

LOL

[@StebanUnderground]

Thanks for these videos my brother, it helps a lot in the small variations that RUBICON JEEP needs to be made; my wife and I are thank you, although in my country it is a rare thing to appreciate modifications to the vehicle... greetings and a big hug bro'

[@gaylerobinson1322]

Love the videos. Grew up in Santa Clarita ( canyon country) and love going to hungry valley. Had several Jeeps. Just picked up a rubi hard rock. You’ve inspired me to try a few more things rather than have someone else do it. Keep them coming.

[@AutoEdits]

This is awesome to hear... thanks so much for sharing that!

[@V843v3r]

I love how he inserted the washer in crisscross pattern lol

[@hogger706]

first the combination look really good. if you think you won't break the stock gears and axle, ok. hope you don't but it can easily be done with 35s. hope you don't but don't be surprised. good luck.

[@AutoEdits]

Watch more videos on the channel about the Jeep.

[@steveallen9581]

I put on 37" patagonia MT . Great off road and really quiet and handle well on road. Way better tire than the General's I went from and the Nitto's before that.

[@AutoEdits]

Glad to hear this!

[@MarkFisch]

Bigger tires less weight I’m in and just started watching!, I hope all is well I know I have Not commented lately but I’m still watching all your videos

[@AutoEdits]

Howdy and thanks! Welcome back to the comments... not mandatory but appreciated!

[@savularity9121]

Nice that's 1of my goals for my jeep. And its 32/rim , 128/4 rim's, 160 bolts for 5 rim's. Fun fun I can't wait

[@AutoEdits]

Good luck!

[@JKGearandGadgets]

I love my vision beadlocks. They are a great wheel 🤘. Good choice!!

[@AutoEdits]

I’m stoked on the Vision wheel family!

[@200Johnnyboy]

he need to put 1tons on his JK.

[@TheRambler-pz1gx]

Do they make a black version of this one?

[@mountainlessmtb9940]

@@TheRambler-pz1gx yes gloss black inner with a machined lip

[@s2theeven887]

Remember when you were like, “I don’t have bead lock wheels cause I don’t do that type of rock crawling 🤣” welcome to the next phase!!!

[@GT4JB]

great video, thx for taking the time to make a clear video. did my beadlocks last night watching baseball. Wa seriously looking at Milestar MTs. They are priced right but have been told they use less durable compound that wont last as long. You get what you pay for. Raceline and Extreme2 MTs

[@AutoEdits]

I haven’t actually found a single downside to the Milestars yet. Best gas mileage of any tire I’ve had on the Jeep and if you watch my Colorado trip video you’ll see them do serious work on a hard 7 trail. Seriously happy with them.

[@shitboxactual]

My guess is you are getting the Bestop Core doors. If so, they're awesome! My buddy who convinced me to go to All 4 Fun had them on his rig all week. The Bestop guys were even taking pics! lol

[@AutoEdits]

YEP! They are pretty good.

[@benjaminsmith9534]

Have 35's on my truck and the official balance bead website said to use 8 oz per tire, you may need more. Also I had zero luck putting the beads in through a valve stem with a TPMS sensor

[@AutoEdits]

Yep! I discovered that painful lesson yesterday trying to add more to the tires... LOL

[@benjaminsmith9534]

AutoEdits did you have to pop the bead and add more that way?

[@AutoEdits]

Yes... and I'm still not thrilled with the results. Eventually will break them down again and vacuum the beads out and go for a spin balance.

[@Tigersmundo]

*Now it just needs a MoTech Gen V 6.2 LS JK Conversion to complete this beast!!!*

[@AutoEdits]

Heck yeah it does!

[@TheRightLine]

Next up, axle truss, and c gussets. Those look great. I never found a need to air down low enough to need beadlocks but just remember that added traction may cause some drivetrain issues.

[@AutoEdits]

Yup!

[@TheRightLine]

@@AutoEdits awesome. I dig your channel. I have one of my own The Right Line and I'm building my 2 door JK. Excited to see where your build goes next.

[@mikehoffman3690]

Patagonia is making a big push into the off-road market. Have not seen a long term report on them. Noticed the Bestop Core doors in the upcoming video clip. Very interested in your take since they are a bit pricey.

[@AutoEdits]

It will be easy to track the performance with me over the next few months but I’ve seen guys like I mention in the video that have had them for a year plus and are still very happy. I’m confident

[@Fixin-To]

Line the painted dot up with the valve. The reduction in wheel weights will be noticeable.

[@AutoEdits]

👍

[@jamiewilson4605]

Trying to see where your follow up on the beads as your tire balancing went.

[@AutoEdits]

I do a thorough review and process in this video kzbin.info/www/bejne/eH-Yg6avea9jppY

[@Kilnor]

Another great video. Changes the whole look of your jeep, she looks great! Btw all other viewers out there, if you're taking the time to comment take the 1 second to hit the like button.

[@AutoEdits]

Wow... love this... thank you!

[@MadDog211]

This build keeps getting better! Awesome work!

[@AutoEdits]

Thanks! I'm really digging it all over again!

[@HardyHarz]

Looks great!! Curious if you here regeared and if not, how have the 4.10s been doing both off-road and on?

[@LarryRichelli]

I am pretty sure he had to regeare. I drive a stock JLUR with 33's and a manual trans. I would not even go to 35's without regearing. Even going to 35's I would lose 6th gear. So even though he didn't answer you I can almost guarantee he would have had to regear!

[@themanthelegend7048]

You should point out the dot on the tire is the heavy side. It's where the steel belt meets. It should go opposite of valve stem for best ride.

[@AutoEdits]

You are the first one to explain why that dot represents the heavy side! I did mount it opposite the valve stem on this install.

[@themanthelegend7048]

@@AutoEdits yeah that holds true on every tire. Obviously a tire this size can't really be balanced. But put the dot on the right side and those glass beads and itll help.

[@peterhaan9068]

Dammit Jason, you are killing me here. I've just installed hardwood flooring in my shop and now my wife is divorcing me!

[@AutoEdits]

Wait what? Tell her to stay.

[@VeRSINGOnTheGo]

Great timing, traded in my wife's TJ for a totally rad JKU that has mounted mall crawler 38x20x13.5 Mickey Thompson Baja's. Is a sweet setup but not for weekend fun or overloading so have been taking it easy. Patagonia's on the bucket list. May run 18's but not positive right now. Just an email for these rims last month. Super vid, thank you. Enjoy them....Look for Lite Brite's channel, these have been abusing these for a year now and will purchase nothing but. They just moved up to 40's on their new motor swapped 6.7L.

[@MrRmga420]

The Jeep looks WAY better imo. I hope those D44s will hold up to your skinny pedal action!

[@AutoEdits]

Thanks and ME TOO! LOL

[@gipstetz6720]

Excellent Excellent vid. Super informative. Thanks for taking the time to post.

[@AutoEdits]

Glad you enjoyed it!

[@nothingtoseaheardammit]

Can't tell you how many times I've been pulled over and told that my beadlocks were illegal for highway use. I keep a printout of the state law that specifically excludes vehicles that came with them stock from the factory. I also happen to have a copy of the original window sticker handy for the officer's reference.

[@AutoEdits]

I have been pulled over zero times for beadlocks.

[@jimschmidt4089]

Fantastic video, the wheels look great. I've been running Patagonia MTs for about 7k miles now and love them. They made it through mud and to a week long CO trip trail riding through the mountains. I also run 17" TRs (look just like the ones on your truck). I used the beads and was a little skeptic at first but they work great. There is a chart I used from EZ Bead that helps guide you on how many ounces to use. Going too low is worse than going a little more than recommended in my opinion. Looking forward to toy next video!

[@AutoEdits]

Great information, thank you! Don't tell anyone but, I love my TR's on the truck even more than the new Visions on the Jeep but the goal was to actually see if I could pull off the go bigger and lighter. Vision hit it out of the park with that forged wheel.

[@AutoEdits]

Great information, thank you! Don't tell anyone but, I love my TR's on the truck even more than the new Visions on the Jeep but the goal was to actually see if I could pull off the go bigger and lighter. Vision hit it out of the park with that forged wheel.

[@jimschmidt4089]

@@AutoEdits I've got 4 of the Hardrock TRs like you have and 1 that was damaged in trying to replace. Hold on to them because they no longer make that series of wheel. I think they look good too.

[@mkeeeemike123]

I’m glad you sound real and not like some fake auto channel guy with the weird annoying voice.

[@AutoEdits]

Me too!

[@mkeeeemike123]

Not sure what descending tone or style that voice is but it’s not convincing at all. Love your channel!! 👍

[@TheVtecdelsol]

I’m in love with your new wheels and tires setup 🤤😍

[@AutoEdits]

Me too!

[@RubiconUnlimited]

Bigger, lighter nice upgrade! Love the contrast the rims bring to the rig too!

[@AutoEdits]

Thanks, yeah it needed a refresh and brighter stance! I'm happy with it.

[@jenniferalvarez2206]

@@AutoEdits hi I’m new too ur Chanel and love ur videos I got myself a jeep and wondering if u sell ur used wheels?

[@JimCantu]

Great review as always!! I just added these tires last week in the same 38x13.5 r17. Totally happy with them so far. I've only had them on the highway so far, but they're quieter and lighter than my previous 35x12.5 r17 Nitto Terra Grapplers. Can't wait to see how well they work off road! Seems like they are getting more popular everyday. The prices have been rising. Saw them a month ago and they were $199 at Walmart.com I eventually got a set at $249 a piece, still a great price for this type of tire. I also got some new wheels that have -12 offset and I have a little rubbing on the back of the driver side tire and the frame when fully turned left. Not enough rubbing to make me want to put the wheel spacers back on but a -18 offset should be perfect. Couldn't afford the beadlocks this time but hopefully soon. And you were right about the tire size, I used 36.5" on my traildash to program the tire size and speedo to be within 1mph at 75mph. Thanks again for all the info. Made my decision to buy these tires even more satisfying knowing you're running them!

[@AutoEdits]

Really great to hear this from you as well! I don't really have a complaint for these tires yet. Better mileage and did great on a hard trail in Colorado.

[@AREyouAFRAIDofTHEdark1]

Not sure if you knew this but you can actually just throw that bag in the wheel and the bag dissolves or breaks and allows the beads to disperse.

[@AutoEdits]

Good tip!

[@brianpatrickcork4513]

Now that we MIGHT be back to Wrangler oriented videos I'm subscribing again. Solid video. I have my 18 JL 2DR on Milestar Patagonia's over ProComp 69s. They are terrific. I also highly recommend them. BestTop doors, indeed!

[@AutoEdits]

So you unsubscribed and now just re-subscribed? ok

[@brianpatrickcork4513]

@@AutoEdits Don't take it personally. I really enjoy the effort and detail you put into your videos. I try and stay focused on Wranglers.

[@AutoEdits]

@@brianpatrickcork4513 I don't take it personal, just found it odd that you had to announce it. I appreciate any and all views in support of the channel so thanks.

[@brianpatrickcork4513]

@@AutoEdits Just voting with my subscriptions. Keep up the great work.

[@Cooper3312000]

I really liked the look of the last set of wheels and tires.

[@AutoEdits]

I did too... but change is good

[@joecruz4846]

I like that rim and tire set up. Just bought a yj. Gonna buy these

[@AutoEdits]

I like them very much and can recommend!

[@robdude1969]

4:50 - dude, one less bottle in the waste pile. I get it completely! reuse as much as you can!

[@AutoEdits]

Yes!

[@DoubleAgent412]

Do you ever see yourself upgrading/replacing the radiator in your Jeep? I haven't seen much for quality tutorials on how to do that. I'd like to try to DIY mine as it has a very slow leak, and I'm curious if that's something you would ever consider doing as a video.

[@AutoEdits]

I haven't thought of that yet since the Jeep runs a stable temperature but I'll look into it.

[@rodburger7827]

Another great upgrade for the Jeep ! Love the New production studio !

[@AutoEdits]

Ha! Wife’s garage...

[@1RoadGarage]

Awesome brother. Great channel!!

[@AutoEdits]

Thank you so much!

[@vinjkdiesel3122]

Bro now you’re ready to Rock but not roll 🤙🏽🤙🏽🤙🏽🤙🏽🤙🏽

[@Bennett-xo6iu]

Jeeps lookin awsome.. Can't wait until you get it in the dirt...

[@AutoEdits]

Yeah buddy!

[@ognaysayer]

Those Vision wheels look pretty sharp.

[@AutoEdits]

I think so too! Thanks!

[@sareynoldssr]

Man, that's a lot of fun with the jeep.

[@JDLC95]

“Becareful not to hurt it, then you JAM IT (WHAAMM!!) IN THERE!!” Love it! 😂

[@AutoEdits]

Hmmm.... sounds about right for me... LOL

[@JDLC95]

AutoEdits haha still need a onboard air kit!

[@FieldWorxoverlandadventures]

Any issues with balance vibrations having bead locks? I’m considering bead locks but not sure because I do long trips for example I will drive 400 miles to get to a trail head and I want comfort on the way but once I get there I want to air down I also tow a small modified teardrop trailer for my jeep, half the people tell me the beat locks to vibrate and you feel it other people tell me they don’t not sure which way to go? I do like the mile star tires they are lightweight and fairly quiet excellent tire, I do feel you have to be a little more careful with the sidewalls. 👍

[@AutoEdits]

I wasn't happy with the inconsistency of the balance beads but once I got standard wheel weights, these beadlocks rode perfect for 30,000 miles and still do.

[@kellythomas6794]

I think Pinto is gonna like the new look 👀. But hands-down they do look pretty good 👏🏾👍🏾

[@AutoEdits]

I agree.

[@johnstemple8836]

Do the beadlock rings come with that wheel? If not where did you purchase them and what ring are they. Look great!

[@AutoEdits]

Yes they do

[@haroldbradley7652]

Thanks for the research. I may be copying you sooner than later. 37's before, now 38's, did you reinforce the axle in any way? C-gussets, truss... Is the stock 44 handling the load well? I scanned the comments and I didn't see if you made changes or not.

[@AutoEdits]

Stock axles are holding up ok so far. The rear twisted on me so I welded the tubes but otherwise that's it.

[@aldoespino1394]

I liked the look of the last set of wheels better. ( love your videos 🇲🇽🇲🇽🇲🇽)

[@AutoEdits]

I hear ya... I liked them too but I like these much better now!

[@twg2118]

Looks like Patagonia has been giving out tires like candy

[@AutoEdits]

Why would you think that?

[@twg2118]

@@AutoEdits All of a sudden many channels have switched to Patagonia tires

[@apexpredator_jku]

Looking good! Welcome to the Core Door Club!

[@AutoEdits]

OH YEAH! Can't wait to edit that video... those things changed everything!

[@apexpredator_jku]

@@AutoEdits total game changer for me. I can go from full door to half door to tube door within minutes. So glad I pre-ordered them on day 1

[@180mph9]

Perfect timing, just ordered some beed locks

[@AutoEdits]

Congrats! I don't recommend the bead balance... just get them spin balanced like a normal tire.

[@paulsworld07]

Aside from the up grades to the jeep I'm wondering if you needed to replace worn ball joints or any other suspension components. I'm sure the metal cloak is holding up as I would expect it to but everything has the chance for failure with all the hard wheeling.

[@AutoEdits]

The Metalcloak steering upgrade took care of the tie rod ends and I did just do front ball joints on the axle to upgraded Moog units with sintered metal bearings. I also installed new front unit bearings from Mevotech.

[@paulsworld07]

@@AutoEdits I had to replaced the ball joints this weekend on my '14 JK and decided to go with some G2 ball joints. I guess it'll gimme a reason to don the diff covers you're sporting. I hope the products are as durable as they claim. (The diff I know is after seeing your aftermath video) Yes your advertising of brands does influence purchases for me at times.

[@Hay-tn6hz]

I love those rims. Nice choice.

[@AutoEdits]

Thanks, I've been thrilled with them so far!

[@zach39mcdonald]

Looks 10x better. Great vid 👍🏽.

[@AutoEdits]

I agree!

[@groundzero270]

I’m putting these on my wife’s JL for her. Great tire!

[@AutoEdits]

They really are fantastic!

[@adventure1887]

Great video, I've had my eye on these 38" tires, what kind of back spacing did you have to get on the wheels to maintain clearance with the 13.5 width? Don't know if you've tried it but If you line up the yellow dot on the tire with the valve steam it will balance a lot easier without balancing beads, even with bead locks, its a balancing mark. if you get a tire that has a red and yellow dot then you use the red dot. The dots indicate the lighter side of the tire. Granted this really doesn't matter for your 40"+ tires and your more aggressive off road only cause they're always a pain it seems like.

[@AutoEdits]

Thanks for the input, I've heard that a bunch about the marks on the tire but are you sure? How in the world do they measure the balance weight in the manufacturing process? About the Patagonia's ... I love them. Only tip to getting best results is to rotate them every 5k miles. They are susceptible to "cupping" but are absolutely worth it. I try to rotate at that interval but let them go to about 8 and started to notice a slight vibration... rotated them and it went away and they've been exceptional ever since.

[@adventure1887]

@@AutoEdits I was preached about those dots during auto tech and then again during motorcycle mechanics school. Honestly didn't get to see why till I started working on industrial equipment and had to go to to a toyo plant to help install a gantry robot that moved tooling around. After the tire is demolded it goes down a quality control line and one of the stations is a dynamic balancer that checks it. Do you think a -12 offset on the wheels is enough for those tires or do I need more back spacing for it to have clearance at flex?

[@AutoEdits]

Interesting. These wheels have a -18 or 4.5 backspace and did require me to add one bump stop spacer to keep them from rubbing at full stuff.

[@11362mem]

You should align the dot on the tire with the TPMS sensor.

[@AutoEdits]

I keep hearing that.

[@grantzellner7888]

Like the look. Did you just choose to go without the black center cap? (I think it looks much better without!)... Also, what gears are you running?

[@AutoEdits]

They don't really offer center caps for these and I'm running 4.88 gears and it's perfect.

[@grantzellner7888]

@@AutoEdits Really... I expected you might say 5.12s. Cool! So, I assume good around town and on the highway? And the beadlocks... also fine for a good amount of necessary driving around town? (Asking because my set up is very similar to yours, but I have to daily drive... so really grinding on the decision of what gears and wheels to go with.)

[@jasonpalmer5437]

Thanks Jason and Pinto 👍

[@AutoEdits]

Thank you!

[@fasterthanyou7605]

Love it!! Just did the diff cover change and fluid change after watching your how to!

[@AutoEdits]

Awesome to hear this!

[@michaelgile5749]

The yellow dot on the side wall should be lined up with the valve stem, for balance, so i am told!

[@AutoEdits]

I've heard both ways on that... thanks for the input.

[@horsepower500]

Looked on your amazon list. (great resource) but didn't see your license plate mount. I love how easy that was to take off. What brand and do you like it?

[@AutoEdits]

I really appreciate that you did that! It’s from MetalCloak and here’s a link metalcloak.com/rear-license-plate-bracket-3rd-brake-light.html

[@mcpushup]

Now if I could only find a place to purchase those 17x9’s.....

[@yhiissuchbs]

Great vid! For next time ~ a. you did not mention why the tire's yellow dot's position in relation to the valve stem is important for balancing, b. 6 ounces should be plenty since less is needed in tire vs on rim, and c. AFAIK, you can't later add more beads through stem if you are using tire pressure sensors. HTH

[@TheArieldp73]

Nice video. A question. The old rims what type are? Like it

[@AutoEdits]

Those are from rugged ridge... liked them a lot. Here's the video about them and there is a link in the description to the exact wheel kzbin.info/www/bejne/l2XKd2eqpKlgebM

[@sawyercook6464]

Pretty sure the yellow dot on the tire is supposed to line up w the valve stem

[@AutoEdits]

I've heard that from other comments but never from an actual tire manufacturer. I don't think they spin balance them in the factory to find the heavy or light spot.

[@henrycruz45cal]

If you want to know how NOT to mount BLs watch this video. First, he didn't line up the yellow dot. Secondly he didnt line the edge of the tire with the rims edging before putting the BL on

[@AutoEdits]

lol

[@WranglerAddiction]

Jeep looking amazing , can’t wait for the next video 🤟

[@AutoEdits]

Thanks!

[@Casey250]

Patagonia tires everywhere it seems. Hmmm what tire next for me 🤔🤔

[@AutoEdits]

Yes, they are doing a good job "low key" marketing... they got me...LOL I love them so far.

[@Dmcummings48]

Looks killer Jason! Love that combination. Can't wait to see it on the trail

[@AutoEdits]

YEAH!

[@BustedWalletGarage]

A: when mixing chemicals in random bottles safety protocol requires you mark it according , i.e. “ soapy water “ or “ not booze “ B: the new wheels look like Mustang GT wheels with bead locks C: I like the “ chunks of rubber “ art work in your garage.

[@AutoEdits]

“Not booze” is genius!

[@mountainlessmtb9940]

Great tires but they wear out very fast on the street. They also cup like crazy if not rotated constantly

[@AutoEdits]

Interesting to hear that... I'll keep an eye on them! Very happy so far.

[@joediepoole1237]

I am having a heck of a time finding the actual wheels you have (17x9.5)

[@AutoEdits]

I just looked and the webpage isn't fully populated yet... www.visionwheel.com/wheel/7215/VisionOffRoad/398%20Manx-Beadlock?finishID=1897#tech-specs Give them a call if you have some questions! Or ask me and I'll try to answer!

[@susieque5130]

@@AutoEdits You mentioned they are called F-Manx in your description, but the link says 398 Manx beadlock and shows a 6-lug. Is it so new, it is not on their website yet? If so, how did you get them? I am looking for new beads and tires and was thinking about these.

[@kellyarlich1289]

Love your videos. Just got a 2016 Jeep sport unlimited. It’s my new baby- I am not gonna be content until I have some good tires and wheels. Then a lift later.. can you help me find some good 33” or 35” that won’t break me! I’m pretty broke now that I got this Jeep. So also I have 17x9 stock rims which I hate! Tires are like mew so I plan on seeking them. I’m on line all the time now Trying to learn the less expensive mods I can do write away. Love that you are so nuts to put bigger and bigger tires on your Jeep. Are you going sell your 35”? Or were they 37”?

[@AutoEdits]

Howdy and welcome! Check this video for a couple easy upgrades kzbin.info/www/bejne/p4K3nmCcmrR_bNk I would swap the JWSpeaker tail lights that I put in the description but otherwise great stuff! I've been happy with the Milestar tires and they are still affordable in the 35" size.

[@EVH5150iii]

I learn so much from this channel! Thanks!

[@AutoEdits]

Glad to hear this!

[@JosePereira-zc7bn]

Those half doors towards the end look sick.

[@AutoEdits]

Just wait for the next video!

[@seanhiggity]

@@AutoEdits I think they look great but they are untouchable at the current price. I had half doors on my last jeep. Living in Massachusetts I quickly developed a strong love hate relationship with my mopar ones

[@alfonzoortega3410]

Great video today , learned something new on the wheels. getting the true Diameter to set Speedometer, gonna have to try that

[@AutoEdits]

Thanks!

[@jameshowey9958]

I just traded a guy my set of 37 Toyos MTs on ballistic off-road wheels for a set of 38 mile star Patagonia on dirty life bead locks and saved 10 pounds a set up. I was very surprised.

[@atlmacman]

Excellent information and delivery.

[@johngray7006]

You are going to love the milestars!!! Here in Alabama they do awesome in mud and rocks...and you can not beat the price!!

[@AutoEdits]

Agreed!

[@johntico1985]

Great Vid. What kind of exhaust are you running? Love it and want to get it for mine.

[@AutoEdits]

www.amazon.com/dp/B00SELEO2M/?ref=exp_autoedits_dp_vv_d

[@mariusdocea438]

Hallo,i have 37" with 3" liftkit from bds,JEEP RUBICON 4 dours 2014,i need a new set wheels.. past this Vision F-Manx 398 Beadlock wheels with NO ALLU SPACER ? Tx

[@PedroGarcia-bu3vb]

Have to do a video of how to remove tire from beadlock wheels only found 1 video on KZbin

[@AutoEdits]

I use a high lift jack under the bumper to break the rear bead... was easy-ish.

[@PedroGarcia-bu3vb]

@@AutoEdits after I write I found that same idea. Thanks for the help and your videos. Greetings from Puerto Rico. I’m changing from 37 to 39.5 in my JK

[@jayjoo8]

You can just go ahead and send me those rugged ridge wheels. 😂

[@AutoEdits]

Sure thing... address and billing information... LOL I'm still figuring out if my buddy is taking them.

[@privateundisclosed4448]

@@AutoEdits Hi there. Can I use these wheels if im not wheeling offroad? Do you have Facebook?

[@AutoEdits]

@@privateundisclosed4448 Yes, autoedits on facebook