Automated dimming of Hyperlite LED workshop lighting

in this video I describe how I configured my workshop lighting to allow automated individual dimming control of each light, and some examples of how that can be useful. It should be noted that the programming details are certainly not "final form" - for example the scene controller top button will eventually be programmed to single press on/off all (vs press-hold for off).
32x48x14 with 1/2 flat chord trusses, 1/2 scissor trusses.
Lights: Hyperlite 150W Hero UFO series, 5k:
hi-hyperlite.c...
Dimmers: Zooz Zen54 0-10V dimmer:
www.getzooz.co...
Scene Controller: Zooz Zen32:
www.getzooz.co...
Home Automation Controller: Hubitat Element C7
hubitat.com/pr...

[@jmarshall6412]

Do you have a diagram of how you wired this?

[@jonjynx3804]

SO the link that you sent states that the lights are 1-10v not 0-10. Which ones do you have?

[@tollav]

The Zooz can handle the 1-10 lights. There is a relay in there that makes it compatible. I have the same setup but with only 2 lights

[@garenpletzer1532]

How's the glare and haze with the lights?

[@banjerpicker8959]

Hi. Are you still satisfied with the lights? Thank you