Automatic choke to manual conversion (mopeds, scooters etc.)

Рет қаралды 11,257

Күн бұрын

Пікірлер: 32

@WhitBoss 11 ай бұрын

Looks like a GREAT idea however my plastics snapped in the vice while applying "unscrew with force". They must have used real adhesive on mine. Haha Perhaps I will apply some heat on the next one.

@jusubbidiy 11 ай бұрын

Sorry to hear.

@elitecystuning 2 ай бұрын

Dude u clamped the threads tighter lmfao 😆😆😆🤷‍♂️🤦‍♂️ u can’t vice it down on the sides of the outter housing what did u expect lmao😂

@elitecystuning 2 ай бұрын

Notice he didn’t have it clamped on the sides he had it clamped were the wire goes in

@SEOWealth 3 ай бұрын

What is the exact bolt size needed? Thanks!

@jusubbidiy 3 ай бұрын

I measured it at kzbin.info/www/bejne/rXO5ooKlgtyqjqs

@lauris4887 Жыл бұрын

How does that bolt just fits theere?

@jusubbidiy Жыл бұрын

It just does 😊

@lauris4887 Жыл бұрын

@@jusubbidiy i just did it and the bolt came out when i released choke

@jusubbidiy Жыл бұрын

@@lauris4887 did you use metric or imperial bolt? This one was 8mm bolt and it fit tight.

@lauris4887 Жыл бұрын

@@jusubbidiy i took the first one that fitted 😂

@grossteilfahrer 2 ай бұрын

Maybe need to glue or loctite the plastic on the bolt threads? Very good tutorial

@jusubbidiy 2 ай бұрын

If you want, you can glue nut to plastic, but not in the threads. To use this manual choke, you need to screw that bolt 😊

@grossteilfahrer 2 ай бұрын

@@jusubbidiy oh but I mean the choke part to the bolt, not the nut

@grossteilfahrer 2 ай бұрын

To avoid unthreading the bolt out of the plunger holder

@grossteilfahrer 2 ай бұрын

So you can't accidentally screw the bolt all the way out

@jusubbidiy 2 ай бұрын

@@grossteilfahrer Yes, you can glue it if you want. I didn't because it was tight fit already.

@dominicboisvert9519 Жыл бұрын

😮🎉 thanks a lot. Good video you made it easy for everyone 👏 👍

@Donbscooters757 Ай бұрын

Now I remember. Those things are hard as hell to unscrew . But I'ma have a crack at it . Tomorrow . And see if this fixes the issue . Cause I can unplug it and it will start but have to plug it right back up or won't run right

@jusubbidiy Ай бұрын

There is glue in that plastic piece threads, so it's hard to open and can crack when you force it. Did you unplug whole choke or just a cable?

@Donbscooters757 Ай бұрын

@jusubbidiy just the plug I didn't take it all way out of the carb

@jusubbidiy Ай бұрын

@@Donbscooters757 Ok, if you unplug the cable, then choke is on all time.

@ginoanthony Жыл бұрын

Show us it working

@jusubbidiy Жыл бұрын

Trust me, it works. I can upload some clip soon.

@ginoanthony Жыл бұрын

@Jusubbi DIY So you basically have to tune it with the screw its not like a normal choke where it's just on and off? And if you screw in the bolt, is that the choke being on, and if you screw out the bolt, the choke being off? I'd like to do this to my carb, but wanna know how it works before I commit

@jusubbidiy Жыл бұрын

@@ginoanthony Yes. Screw bolt in = choke of, screw bolt out = choke on. I make video for you later today.

@ginoanthony Жыл бұрын

@Jusubbi DIY Thank you 🙏 can't wait for the video... Tag me when you upload it

@jusubbidiy Жыл бұрын

@@ginoanthony kzbin.info/www/bejne/jGfXmWtrqLOkn9U