Automatic Estimation of Land Surface Temperature (LST) using SCP Plugin in QGIS with Landsat

[@sabafatima1719]

I am using the SCP plugin in 2024, the latest version doesn't have separate options for all satellites in preprocessing tab. Now how I am supposed to get values in Celsius? and all process in general?

[@nidapyon]

which version of QGIS do you use? Because I can't find Landsat button in in the preprocessing menu

[@RandomTownTR]

ı have same problem did you solve?

[@anonymous-eu3pd]

Very helpful video Thanks a lot for this tutorial.

[@TerraSpatial]

Thanks for your valuable comments

[@yuik.1343]

Thanks so much for this tutorial. We found it very helpful for our project!

[@TerraSpatial]

Thanks Yui K.

[@sanjoybarman1305]

Please make a tutorial on ''Shannon's entropy'' for Directional_expansion_of_Urban_Growth/Urban_Area

[@PrakashRohithVeigasScout]

The temperature shown the Satellite data are more than 57 deg cel. Can you please tell me where did I do a mistake? Or how can I resolve this?

[@rhtjuneja1991]

Hi, Thanks for this tutorial. Can LST go from 30 to 75 deg C? And the results are weird. Urban areas having lower LST values than the periphery of the city. Can you help?

[@adrient7800]

What's the difference between B10 and B11 ?

[@ANJA-mj1to]

Thank you! We now have webinar on surface temperature calculating model IN ASTME1980 for calculation of solar reflectance lutex SRI (value 0-78 cca. 0-100) of horizontal and low sloped opaque surface at standard conditions like kind of Method itended to calculate SRI for surface ( as well to meet requirements a roofing SRI materials of 29 or higher for steep slop cca. 2,12 : 11,89 roofing and emissivity greater then 0,1 and the highest SRI 0 - 100). Thank you for effective presentation to have questions because maximum reflectance in ASTME1980 deep ends on the boath reflected directiones and incoming direction on the surfface. In the other words, it has a value for every combination of incoming and outcoming direction and this presentation gives us full spectrum for related bidirectional reflectance of distributer function and upper limit 1. As well this clearly present sky flux and sky and air temperature effective for equation. GREAT PRESENTATION FOR GEOLOGY MULTITASKING QUESTIONS!

[@mohammadkamruzzman1836]

Hello, don't we need to correct the Emissivity through NDVI calculation? or it's already included in the tool?

[@mohammadkamruzzman1836]

Thanks for the video, please suggest between B10 and B11, which is comparatively better for thermal analysis?

[@TerraSpatial]

Hi, Band 10 is the better option

[@sarabnight5311]

how i can know if i download band 10 only or band 11 also

[@TerraSpatial]

Hi Sarab Night, when you extract the file and you can know by name. For Band 10 it will finishing b10 and for band 11 it will b11.Ex: LC08_L1TP_142549_20210008_20210615_02_T1_B10 at last you can see B10, It means Band 10, likewise you identify the band number.

[@sajjadhussain5615]

I tried to install for qgis 3.16.15 but it show error to the "Couldn't load plugin 'NITK_RS-GIS_17' due to an error when calling its classFactory() method" ...... What shall I do

[@anonymous-eu3pd]

How to add basemap to this image.?

[@payeldas6651]

I followed all steps but at the end shown python is error. Would you tell me now what I do?

[@mohammedimthathullah1307]

Is there any way to find like average LST for a month ?

[@aqibhussain3147]

Thanks for the video. I need to ask why we only choose B10 and B11?

[@TerraSpatial]

Hi Aqib Hussain, because the B10 and B11 bands records the thermal data.

[@rounakchoudhary17]

Please provide link for downloading landset data

[@TerraSpatial]

Hi Rounak Choudhary, earthexplorer.usgs.gov/

[@martablaszczyk7434]

Thank you so much for the useful material! Just wanted to ask what if I dont have B11? is B10 sufficient?

[@TerraSpatial]

Hi Marta Blaszczyk, Band 10 is sufficient.

[@youway1395]

Sir could u tel me how to discover 2008 historical images by usgs I already saw ur video but I couldn't understand it very important for further I want contact u

[@luisbasa2947]

Thank you, I am about to try it. My professor told me to se the band calc but it just generates me a 0 byte while which i cannot use, i am trying it asap

[@luisbasa2947]

II am missing the satellite, sun elevation and earth sun distance

[@martablaszczyk7434]

Another q I had was that I have no idea why the Gray dimensions in my case are from 41 graz to 69. This seems impossible since zou have it from 20 to 30 Celcius, do you know what could be the problem?

[@PrakashRohithVeigasScout]

Same here. How can we resolve this?

[@ellin8340]

maybe it is due to the pixels that are on the edges and modify your histogram, maybe if you apply a cut your data is normalized, I tried to do it with level 2 layers but it did not work with the thermal band (of all the possible methods) , if I do this with level 1 it works

[@mohammadkamruzzman1836]

Im facing same problem, the max, min temparature output was 77, and 57 degrees respectively, whereas the temparature was recorded around 35 on that day. I found same problem in many B10 datasets of Landsat 8 and 9. Did you find any solution?

[@mdgeomedia4647]

Is the same process be applied for the Landsat 5 image? there is a problem when I am doing in Landsat 5 image. the upper and the lower value has become in 78 and more than 5000. what is going on I can't understand. Can help me?

[@TerraSpatial]

Hi, Can you specify which satellite in Landsat 5 you have downloaded MSS or TM?

[@rakibulhassan7277]

Please provide me the word file, I have sent an e-mail