Automatic Powered Levered Ball Valve

Home Automation wireless automatic water shutoff valve. See the latest version at: • Video and www.econetshop...

[@ronhat-nx6yq]

These things can also be used for turning off natural gas valves. You can use arduino gas sensors to activate them. Everyone using propane/natural gas should install them. I have a natural gas well and have used it for everything in my house for almost 20 years but I use a linear actuator. This should work ok too.

[@fickett71]

I'm going to get one and use it as a antenna feed line discussion in a thunderstorm

[@tejanaiduteja7361]

Annaya edhi kitchen lo nunchi roof top midha unna water tank varaku set cheya ghalama

[@whitecollarhomestead2498]

I was sold until I saw the $135 price

[@b5a5m5]

Seen these on Amazon for like $35

[@niyaziislek6264]

Can be controlled to open and closed by timer

[@sazalimohamedsalleh3970]

Hei there, thanks for the video. Liked and subscribed.

[@Faizkhan-bf5bm]

I was about to Design an automatic valve for my Final year project, but i did a quick youtube search and found this automatic valve controlled via phone. WTF man everything is invented already😅

[@prathameshlad397]

Even solenoid valves take over...lol

[@yashwantgharge673]

Can I get on Amazon

[@erincapp4260]

I wonder if it could be thermostatically controlled to shut off a oil dripper on a wood furnace????

[@EcoNetControls]

Please check out the latest versions of the Bulldog at www.EcoNetShop.com. and yes, you could add temperature control and many other sensors to control the Bulldog

[@GrowingDownUnder]

This would be a great idea if hooked up to a soil moisture sensor & arduino

[@2002rashidkhan]

Is it available in Islamabad Pakistan...?

[@dustysidepanel3075]

CAN YOU USE THIS ANYWHERE IN THE WORLD? SAY YOURE ON VACATION AND NEED TO WATER YOUR PLANTS

[@adamnasher944]

Thank you

[@gustavoadriangiudice397]

The next time use a solenoide for refrigeration.

[@sandeepmargoli5928]

Range distance???

[@ranjitkumermodak5280]

Can valve be opened & closed at inferior times? Please replay me.

[@tawficyakubu5116]

Where to buy it?

[@bol.8749]

Why not have a remote control like to turn it closed or open with the push of either button?

[@dreamstarme9162]

Can I order it from Myanmar?

[@BhubanJana-s7m]

How much price this type automatic power leavened ball valb

[@EcoNetControls]

please check out www.EcoNetShop.com

[@peymanpeymani942]

Can a thermostat control this valve?

[@EcoNetControls]

Yes, but it would need to be added to your Smart Home. See the new Bulldog in action at: www.econetshop.com/catalog/product/view/id/2047/s/the-bulldog-valve-robot-hc2lxl/category/23/ (smarter, stronger)

[@heroesandzeros7802]

This did not work for me. Sure it tried to turn, but would not turn a new valve. It tried to twist itself in half.

[@t.k.sureshkumaarkumaar5883]

என்ன விலை ஐயா

[@luisUSAF]

Please, can u send me an Amazon link to buy it, Thanks in advance.

[@JudWest]

Can this turn a ball valve designed for 3000psi?

[@DkKumar-qq2bp]

Mai knha kharid skata hu

[@SuperPersianproud]

Hi there! Thanks for your video! Can this be used outdoor? For irrigation purposes? In mostly rainy weather? I appreciate your response! 🙏🏻

[@EcoNetControls]

The Valve Robot should be covered from rain and sun when used outdoors. See the new Bulldog Valve Robot at www.EcoNetShop.com and www.econetshop.com/faqbulldog#outdoor

[@EcoNetControls]

Please check www.econetshop.com/faqbulldog#outdoor

[@kamalgowda5377]

Were can I buy

[@EcoNetControls]

Please contact EcoNet using [e-mail] or check out our store at www.EcoNetShop.com

[@syedimtiyaz1009]

can we opertate autonmatic powered levered ball valve by feeding the programme in audino?????

[@EcoNetControls]

Any controller/HUB that uses the Smart Home Z-Wave communications standard should be compatible with the EcoNet Valve Robot. See: kzbin.info/www/bejne/lWXYoGatot-NopI

[@Ravikumar-yb3wx]

How to get this product

[@EcoNetControls]

Please see our new version and other products at www.EcoNetShop.com

[@lrtaralte]

Can a water level indicator control it.

[@EcoNetControls]

Yes. You would need to select a Controller/HUB and leak/water sensors that work for your application. Please send further questions of comments to [e-mail]. Cheers!

[@ninaashton9829]

I love this. I am doing a entire landscape irrigation project based off 16 hose bibs....yes, ball valve hose bibs. This would be great if it could be paired with a irrigation controller. Want to donate 16 to my project and I can share on KZbin?

[@EcoNetControls]

Home Automation wireless automatic water shutoff valve. See the latest version at: kzbin.info/www/bejne/lWXYoGatot-NopI

[@bryanlecuyer5685]

I used the Flowtech battery powered valve until it was discontinued. It worked pretty good. Now aqua line have a simple flow irrigation valve. I’ve been installing irrigation systems since 1999. Question. Why would you come off 16 hose bibs ? Just plumb out one source off a 3/4” line from inside the basement.

[@johncalang9936]

@EcoNet Controls, is this programmable?

[@EcoNetControls]

The Valve Robot is a Z-Wave Smart Home devices that requires a separate controller. We like the Samsung SmartThings controller. The controller allows you to add automation including automatic shut off when a leak is detected (add water sensors), notifications to smart phone and smart phone control of valve robot. See: kzbin.info/www/bejne/lWXYoGatot-NopI

[@johncalang9936]

thank you for showing

[@acunaa92]

Why not just buy a motorized ball or solenoid valve?

[@EcoNetControls]

+Alex Acuna many home automation diy types do not want to tackle the plumbing required to install a motorized ball valve. No plumbing is required and you don't have to deal with the city/municipality to shut off the water main. If you are happy doing the plumbing then a motorized type is a good solution. We will be introducing a new version that has an integrated ball valve.

[@WilliamJoseph2015]

I was thinking you do not need a internet connection in your home for auto shut off from your phone.

[@EcoNetControls]

The EBV105 water shut off controller is compatible with most Smart Home controllers that support the Z-Wave protocol including Wink, Vera, SmartThings and Homeseer. A

[@WilliamJoseph2015]

EcoNet Controls Thank you but I'm trying to understand. What does that mean?

[@miletdelacruz3431]

pls... make it simple your explanation...

[@sohibia]

Does it fit with PVC ball valve?

[@EcoNetControls]

At this point our Valve Robot works with standard steel/brass ball valves. We are considering support for PVC type valves. (Maybe in 2018)

[@yoyozhang1551]

Hi Sohibia, we are the motorized valve PVC motorized valve manufacture,if you need the valve, please contact:[e-mail] regards, yoyo

[@sachinpasalkar7407]

I CAN USE THIS FOR 4" PVC PIPE?

[@EcoNetControls]

The largest valve supported is 2". Also, see the generation II version in action at kzbin.info/www/bejne/lWXYoGatot-NopI

[@dannyconstantinis7446]

Can the actuator work with a 1.5 inch valve and 24 v?

[@EcoNetControls]

no on the 1.5" A 1" valve is the largest supported. The unit runs off 12V DC with the included AC adapter

[@amritnath4603]

Hii sir, please tell me where should i buy these products and how much cost is that

[@EcoNetControls]

You can purchase our Smart Home Valve Robot at www.EcoNetControls.com or email a quote request to [e-mail] A controller is required that supports Z-Wave. We like the Smart Things controller

[@sanjaypable253]

EcoNet Co ntrols

[@casavirtual-automacao]

Where can to buy?

[@EcoNetControls]

+Casa Virtual . The EBV105 can be purchased direct from our E-Store at starlinepc.com/index.php/z-wave/water-shut-off.html Cheers!

[@dfuentes80]

Would this work with Broadlink RM Pro? Regards,

[@EcoNetControls]

In a quick check of the Broadlink RM Pro controller, it does not look like it supports the Z-Wave Smart Home standard. Our devices use the Z-Wave communications protocol. So I guess the answer is no.

[@dannyconstantinis7446]

EcoNet Controls

[@EcoNetControls]

I am not familiar with the Broadlink RM Pro. The EBV105 works with most controllers that support the Z-Wave protocol.

[@heroesandzeros7802]

You are better off using solenoid valves and Alexa controls.

[@SubhanRealEstate]

How can it be use

[@singhparambir]

Can i select the extent to which the arm can travel? Suppose i don't want 100% open and only 50%?

[@EcoNetControls]

At this point our valve robot only supports two positions, 0% open and 100% open. Please contact [e-mail] for more details or check our site www.EcoNetControls.com for updates

[@Njogu7]

Actually it's possible. Just add distance/lag between the two screws/nuts holding the handle.

[@peacew6]

No reset function? The water sensor will detect a small leak then makes this valve shut off. water dries. Then the valve opens again.

[@EcoNetControls]

Yes, typically, depending on controller configuration, human intervention is required to turn the water back on after a leak alert. See our Bulldog Valve Robot in action at: kzbin.info/www/bejne/lWXYoGatot-NopI

[@abdullahallmamun9857]

Joss valb

[@sanjaypable253]

India s manufacturing want to done this help them

[@saibeliever9976]

Sir I want the product

[@EcoNetControls]

This video shows the old version. See the new version at kzbin.info/www/bejne/lWXYoGatot-NopI also, for more details including price and purchase see www.EcoNetControls.com

[@polishedbrother]

Yea my Kids be in the shower Too Long!!! I’ll fix that..

[@eimbh]

Solenoid valve is better option and very cheap compared to this

[@EcoNetControls]

You can not install a solenoid valve over an existing ball valve. If you want to pay a plumber or do the plumbing yourself, yes a Solenoid valve is less expensive although solenoid valves are less reliable and more subject to failure because of the very hard on and off action. Also, see the latest version of the Valve Robot at: kzbin.info/www/bejne/lWXYoGatot-NopI