Tech Tip Tuesday is always so informative and interesting content. Thanks Doug 😀👏🔥👍🙏💯
@gwbuilder57792 жыл бұрын
Excellent tip Doug.👌 I will add that the same applies to the differentials. Most people think that the vent line is just for keeping water out, but if you put a catch can with a return, you can be sure the differentials have the proper levels as well.🤙
@Knackersjewels2 жыл бұрын
That's a great idea, I've actually been having issues with a diff puking out the breather, even at the correct level. Time to get me an overflow bottle
@jimmesser58212 жыл бұрын
Good stuff!!!!!!! Keep them coming!!!!!
@jamesaikens2 жыл бұрын
Nice work! I'd like to see a tech video on adding a 1BAR to my crankcase. Where to tap for it, and what would the readings mean in the logs. A good follow-up to that would be coolant pressure (where to place the sensor), and then a backpressure sensor and how to decode that data in your logs.
@robinwendt55272 жыл бұрын
i love that doug and everyone @ motion likes to see nt only customers but other racers do good. just another reason I buy boxes of stuff with the dum dums in the box!
@TheLastTater2 жыл бұрын
Great info! Thanks for the support!
@JohnRoberts712 жыл бұрын
Great content thanks for sharing, very informative
@youknow-kp6zd2 жыл бұрын
U guys make me won't to get bk into car's again I had the badass rides uz to race the mountain in NZ lol
@invertedpolarity68902 жыл бұрын
I don’t race my car but I performed a trans fluid flush on my 2017 Camaro SS. I believed that a dealership flush was done but was unsure. Glad I did it myself as the level was 2 quarts low which would happen if you don’t check the fluid level properly.
@Uglyducklyracing Жыл бұрын
Any videos of how and where is best to install like how it is put into the system example trans lines or vent tube only ?
@bloodsweatandhorsepower20792 жыл бұрын
You guys should definitely do a tech tip Tuesday on the monocord
@curtjobity83602 жыл бұрын
Great content bro very informative thanks
@chief33782 жыл бұрын
can we get a update on the Nova please
@1999evo12 жыл бұрын
Please ......
@lewisdeclouette63422 жыл бұрын
Good looking out preciate it
@richardcoleman96452 жыл бұрын
So is there a video how and where to install this please?
@rickwatters78492 жыл бұрын
Your presentations are getting much better. You may want to consider not saying “ To tell you the truth” I have already assumed you are telling me the truth. Maybe say “what I have found is....” or “ our experiences have shown us”. You may also use a dry erase board to illustrate your verb length examples.
@NickelWhiteS5502 жыл бұрын
That’s why I left my pan off after I installed my lock in dip stick to check where the true full mark is on my th400.
@dunepunk782 жыл бұрын
Stubby LS oil dipsticks! Let’s make one ☝🏻
@WendySaysSo2 жыл бұрын
Any Nova updates ?
@RobertSiwik1968 Жыл бұрын
So is there a way to calibrate a dipstick,and how do you know how much to overfill the trans?
@claymore4402 жыл бұрын
So what does he say about using what method to insure your transmission is at the correct level? Stock dipstick?
@kylethomas3942 жыл бұрын
Have you done one about choosing the correct rear gear ? I’ve been asking around to see what i need and so far have gotten 3 different answers from 3 different people ,
@Knackersjewels2 жыл бұрын
That comes down to personal preference
@30YearOldBunta Жыл бұрын
What kind of force would cause the pan to get sloshed like that because I'm doing 2.04 60fts in my big daily driver and I'm having shifting issues but seemingly only at the track, street pulls fine if I roll into it. I might try something like this before I tear apart the transmission.
@CARRIERGUY2 жыл бұрын
Awesome!
@skylinejunky22002 жыл бұрын
thanks big time fam
@joecameron34062 жыл бұрын
How about in line transmission filters
@courtneychappell88012 жыл бұрын
America 🇺🇸
@irvingbar45692 жыл бұрын
Im having that problem when I get on it it pukes from the breather can it be a bad converter 5.3 ls to a built th400 2500 stall happens when I hit 80 mph
@irvingbar45692 жыл бұрын
I did over fill the transmission but you would think it would puke the extra fluid until its happy I hope this overflow can helps
@rossgebert-goldsmith1832 жыл бұрын
Prime those converters good
@ClarksAutoAndPerformance2 жыл бұрын
Do you plan on making a lid without a weep hole? Run the top fitting to the coolant catch can.
@JBarnes9172 жыл бұрын
Why would you want to run it to the coolant catch can?
@JBarnes9172 жыл бұрын
@@motoweenies4431 then you have the chance of trans fluid in your coolant or coolant in your trans fluid… both sound stupid
@JBarnes9172 жыл бұрын
@@motoweenies4431 no let’s say you pop a head gasket, it pressurizes the cooling system and that pushes coolant now back to the trans. You had something simple that just took out your $10,000 trans.
@jamieschnowske49812 жыл бұрын
I was always told that overfilling a trans can cause the fluid to foam and damage a trans
@barryacromp67752 жыл бұрын
Trans fluid has anti foaming properties factored in its ingredient formula overfilling normally causes weeping from the vent hence the need for a catch can.