[Automation Module Project DIY] Smart Home Tech Controller (2020 4K!)

[@포니22]

Detailed description Very good.

[@KinCony]

thanks! we will make more videos.

[@ELECTRICAL.WORKING.756]

I want to learn more from you about this

[@arunaanand3447]

really thanks for your teaching

[@KinCony]

you are welcome

[@Sm-gz4ot]

COLB & COLBS have a timer ?

[@KinCony]

yes, have a timer inside.

[@leodjetv]

Very nice demo sir, i want to learn that someday, thank u for sharing

[@KinCony]

you are welcome

[@strategy2184]

Thanks Friend! Rly good video!!

[@KinCony]

thanks

[@tiagorodrigues6681]

Very good video content! Very well explained

[@KinCony]

thanks! we will take more video accroding to demands. everyone can tell us what you want.

[@circkooran8073]

Please add touch screen for this relay controller , dimmer or for sensor

[@KinCony]

we already have dimmer ,here is link: kzbin.info/www/bejne/mXzKk4tuo7RjoLM

[@circkooran8073]

I want touch screen tablet panel for entire home...

[@miguelrafael7771]

Has probado un Siemens s7-1214?

[@KinCony]

do you means use by KNX bus?

[@klassikman6411]

Hi! Good video. Please specify cable lenght and any specifics, when you connecting "button panel". And update video, when you connecting not only two button, but 4 or 5. Thanks.

[@KinCony]

you can see this video: kzbin.info/www/bejne/h5zRlp9uZ9uDhas all is expained. if you want use 10 switch panel, just parallel connection, no limit.

[@jarrejo1]

Hi, Great nice video. I have a question. My need is to control a motor that opens a door up and down. There will be a sensor at the bottom and one also at the top. Additionally, it should have a switch that someone could open or close the door (toggle switch!). Is this possible? (My use case is to control 3 up and down doors and 2 doors linear actuator using a 16 way Relay.)

[@KinCony]

if you want to control motor, every motor need 2 relays for forward and reverse rotation. door sensor can connect with controller's input, i think you can chose controller that have "COM,NC,NO" port is better. you said you want to install a switch panel for close/open the door, you can wait for a time, we are developing the new firmware for KC868-COL,that can use for logical control, define switch panel function by yourself, such as your need function.

[@cikguheng9079]

Sir..the schematic upper circuit breaker not connect together because it have separate control

[@KinCony]

right

[@cikguheng9079]

@@KinCony i like to buy but my home not ready yet

[@cikguheng9079]

Will buy

[@KinCony]

@@cikguheng9079 ok,any questions yon also post to our technical support forum: www.kincony.com/forum/

[@balavannan20]

Can control through third party applications?

[@KinCony]

yes, we open protocol. but if you add the google module or alexa voice module, you can also use google home app or amazon alexa app.

[@sudhadotsudha]

Much appreciated , Nice , simple setup to explain everything. I have a question . I want to install this with my existing home without changing any wiring , only main board control? if so how to

[@KinCony]

if you can't put any wires, i think you can't put the swith panel on the wall. i think you should use wireless controller.

[@jjiikkrraa]

Hi. Nice video. I have a question. When you turned on and off all your lights it went on and off one after another. Why the delay? Is it possible to turn on and off all the lights in once? Thx. Jirka

[@KinCony]

the delay time a added by setting, you can cancelled.

[@joserodriguez3039]

where to buy all this parts?

[@KinCony]

our online store: kincony.aliexpress.com

[@mznvlogz]

I wanna buy this device please guide me about.

[@KinCony]

you can see our online store: kincony.aliexpress.com/store/807891

[@KinCony]

@@passrevelator8800 any questions you can post to our technical support forum: www.kincony.com/forum our technical support will help you.

[@balakhnatv6930]

Чем отличается от контроллера кс868?

[@KinCony]

KC868 have many model, just different input and output channels.

[@كنمتميزا-ط5ظ]

Great job sir

[@segarafi]

This device can work with poe lan?

[@KinCony]

yes

[@KinCony]

@@segarafi my means, you can connect our relay controller with POE switch, but it need power supply for DC12V, POE's DC12v current is very low.

[@josemanuelalogoadjomo7863]

very well presented

[@KinCony]

thanks

[@edkill2]

buenos dias tendrian algun diagrama general?

[@KinCony]

hello,diagrama is in this video link: kzbin.info/www/bejne/pnXSe39th9apmas

[@bcBilalAttique]

nice video

[@KinCony]

thanks

[@anas7hamed]

What about siri support?

[@KinCony]

now we are making new video for apple homekit and siri for relay controller. will upload soon.

[@KinCony]

kzbin.info/www/bejne/d2qwapZ_a9qaaq8 uploaded the new video about how to use Siri control KC868 relay controller.

[@tiagorodrigues6681]

Tiago from Brazil!

[@KinCony]

thanks!

[@yousefhamideh3605]

How to communicate with you on WhatsApp for necessity if you please

[@KinCony]

whatsapp:[phone]

[@ТакМир]

👍👍👍👍

[@KinCony]

Thanks! We will make another new video about temperature and humidity sensor for everyone.

[@houssinemaxsystem8581]

Very good video content! Very well explained

[@KinCony]

thanks