What is an AC Servo Motor? Motion Control From AutomationDirect

[@maggieMakesMechs]

Learned more in 10 minutes than I have in 10hrs of research. Thank you!

[@automationdirect]

Glad it was helpful. Please let us know if you have any further questions, and thank you for the kind words!

[@acluster3411]

Brilliant demo! You are a great teacher.

[@automationdirect]

Thank you! We are glad it was helpful. :) Did you know that we have lots of servo videos? Check it out here: www.automationdirect.com/videos/home?t=link&cat1=50&cat2=81&cat3=200&q=Sure%20Servo%202

[@nightmareinaction629]

The ferro fluid demonstration. Is one kf the best i seen so far

[@automationdirect]

Thanks, it was a pleasure to create.

[@AlexJoneses]

this is one of the best made cnc videos ive ever seen

[@automationdirect]

Glad you liked it!

[@fabianomoreiraamaro9920]

The best demo video I saw in my life!

[@automationdirect]

Glad you liked it. We have many more videos with demonstrations. Please subscribe and check out our channel!

[@cakepie3484]

Hands down one of the best videos on the topic. Great job!

[@automationdirect]

Thanks! Did you know that we have lots of servo videos? Check it out here: www.automationdirect.com/videos. Search for "SureServo2"

[@jamesbiswas3309]

It's very practical lesson, thank you sir. I will apply for my students

[@automationdirect]

You are welcome! FYI: We have over 1200 automation tutorial videos like it at: www.automationdirect.com/videos ......... by topic www.automationdirect.com/cookbook ... by subject

[@antesdedormirmanu6789]

Very very nice and didactic video... Well use and appreciated ;)

[@automationdirect]

@antesdedormirmanu6789 Thank you for the kind comment. Make sure to check out more of our videos at www.automationdirect.com/videos/home

[@jimknowlton342]

This is an awesome video

[@automationdirect]

Thanks for the high praise. Please make sure to subscribe to our Drives and Motion channel for more upcoming videos like this. kzbin.info/door/RAt8ZvxsefYgBNRrw0nAOQ

[@andreasz670]

Fantastic video! Very nice work!

[@automationdirect]

Thank you. We are glad you enjoyed it!

[@keyurrajput1532]

Very informative

[@automationdirect]

Thanks for the for the positive comment. Please make sure to subscribe to our Drives and Motion channel for more upcoming videos like this. kzbin.info/door/RAt8ZvxsefYgBNRrw0nAOQ

[@risoldetok]

very good explanation. I congratulate you, very good her channel. I would need to know more about the signals that enter the driver to move the ac servo motor 3 phase... thanks

[@automationdirect]

Hi Ricardo, Thanks for the feedback! Did you know that we have lots of videos showing how to setup the drive? Go here: www.automationdirect.com/videos Then, on the left, select: Motion Control >> Servo Systems >> SureServo2

[@whatcher8151]

Hi, Jerry here, 20 years into machining but not this stuff, yes a lot of stuffing. Tell me but some are using these for spindles but can or do they utilize A/C motors for drive and positioning for the X & Y. If so can you speak (just touch) to the accuracy and speed of this. One more question is about hydraulics I have never looked into so this is a blind question. Here goes: Could hydraulics be made to control all axis movements in minute machining specs. Maybe also coupled with a laser positioning feedback system, of course the laser system encapsulated? I just was thinking if the X and Y servo motors and ball screw and all the controllers involved along with a ball screw could be done away with by laser controlled hydraulic system. One hydraulic motor could power all three, split with control valving? But looking into briefly the hydraulic spindles available only go to 7500 rpm with would mean extreme cost and adaption to a transmission. So I'll just leave this question to X & Y. Okay, but still using an automatic tool changer A/C spindle motor of course or 6 hamsters and a feeder and wheel.. Ut oh, another question: I seen a spindle motor that had a coolant system running through it. Could not this cooling system be use internally to cool it put valving to expel it to the outside for the tooling. Internal & external cooling. ( probably already done ) that's ENOUGH! I'm done scouts honor. Never been one so it holds no coolant. Hope this question wasn't too-pid. Reminds me, a joke: How do you top a tar? Tep on the bwake toopid! Dang it, ya gotta have machines to build them. Thank- You and God Bless.

[@automationdirect]

Hi Jerry, That's a lot to cover in a KZbin comment, so I would encourage you to contact out free tech support during regular business hours to discuss. Here are all the ways you can contact them: support.automationdirect.com/ In the meantime, some quick answers: 1. A/C Servo Accuracy - They are CRAZY accurate. The encoder resolution is 16777216 pulses per revolution! 2. Hydraulics: I suppose, but it would be REAL slow and difficult to get the accuracy of a servo. 3. Cooling: Sure you could use the same coolant in multiple places.

[@sasca854]

Great job!

[@automationdirect]

@sasca854, Thank you for the comment, we are glad you enjoyed the video. Make sure to check out more of our videos at www.automationdirect.com/videos/home

[@siddie87]

loved it!

[@automationdirect]

Thank you, we are glad you enjoyed the video. Make sure to check out more of our videos at www.automationdirect.com/videos?ZuC5xZC8PE&VideoTeamComment

[@edwinchang5489]

very good 👍

[@automationdirect]

Thanks! Make sure to check out more of our videos at www.automationdirect.com/videos/home

[@tageldinhouse6339]

ممكن طريقة توصيل الماتور السيرفو موتور علي الاردينوا

[@automationdirect]

ذلك يعتمد على محرك سيرفو. تدعم ماكيناتنا Modbus/TCP أو Modbus/RTU وهناك مكونات إضافية لـ Arduino لتلك اللغات.

[@annaoaulinovna]

what is inside hybrid stepper step servo motors?

[@automationdirect]

Anna, I am not sure what you mean by a hybrid stepper step servo motor. AutomationDirect.com sells stepper motors and servo motors, but the internal motor technology is very different. We don't sell a hybrid model.

[@sanyastephen2471]

Great

[@automationdirect]

Thanks! Make sure to check out more of our videos at www.automationdirect.com/videos/home

[@seimela]

Do same video Dc servo motor

[@automationdirect]

Thanks for the suggestion!

[@aalapgandhi9227]

How to earth the servo system

[@automationdirect]

@aalap Gandhi, Connecting the servo system to Earth Ground will vary based on the manufacturer. Please follow the manufacturer's recommendation (Should be found in their instruction and/or installation documentation) for grounding instructions. Thanks!

[@spm2508]

❤👌💪🙏👆