Thank you so much sir for this kind of explanation, you are great sir🙏 in single video you cleared my many doubts....keep uploading videos sir....thank you once again
@arsitech-ltd3 жыл бұрын
Thanks for appreciating my work. Please go through playlist. You will get many helpful videos.
@kankichiryotsu41682 жыл бұрын
The way you explained the topic was fantastic. I am able to grasp the basic concepts and functions now. Thank you So much Sir ❤️
@arsitech-ltd2 жыл бұрын
Most welcome dear.
@sainarayanen28795 жыл бұрын
Thankyou so much sir, it was very informative, I am currently pursuing hyperworks and then solvers abaqus and optistruct
@arsitech-ltd5 жыл бұрын
Always welcome sai, I uploaded more video on meshing in Hypermesh, Abaqus & others. You may have look in playlist.
@sainarayanen28795 жыл бұрын
@@arsitech-ltd sir can I get your WhatsApp contact
@Mishraji_hain2 жыл бұрын
Very helpful videos! Thanks
@arsitech-ltd2 жыл бұрын
Welcome dear.
@srikant51911 ай бұрын
Wonderful video for beginners! I have a question related to meshing. What happens if there are multiple meshes for the same surface. Let's say, there are 10 quads on a surface. I create another set of exactly same elements (maybe by using reflect option), then how does it impact the simulation? And how to delete only one layer of elements? Is it possible?
@arsitech-ltd9 ай бұрын
Dear, By default hypermesh remesh existing mesh...but somehow if duplicate element generates it will give you twich the stiffness value which is wrong.. in many cases simulation will be aborted.
@ishansonawane49353 жыл бұрын
Thank you for such a nice explanation
@sauravpanda13804 жыл бұрын
great video sir!!! Best wishes
@arsitech-ltd4 жыл бұрын
I suggest to go with all videos of playlist "Meshing in Hypermesh" on my channel "SimTech05". Lots of conceptual things you will learn. kzbin.info/aero/PLdXwpuOm8L9pq6LkUcVba_rjf56px29Hj
@jeophilip43534 жыл бұрын
Quality Content
@arsitech-ltd4 жыл бұрын
Thanks for appreciation.
@pradeepbobade95753 жыл бұрын
it is very good content
@SandipMandlikCADCAM3 жыл бұрын
Very clear
@srikantav40682 жыл бұрын
Thank you for the video. I have a question regarding the splitting. When I split a surface for meshing, and I applied load of 30N on the surface, the load was not being transferred to the other part because of the split. So when we split a surface for meshing, do we have to unsplit it for the analysis (after meshing)?
@arsitech-ltd2 жыл бұрын
Dear, If split surfaces are connected (green line) then the elements and node s also connected and load will be transfer without issue. If they are not connected (red line) then load will not transfer.
@srikantav40682 жыл бұрын
@@arsitech-ltd Thank you :)
@arsitech-ltd2 жыл бұрын
Welcome dear.
@shiladityamajumdar72153 жыл бұрын
Why do we have non connected elements? Also when do we get non connected element? Great content by the way. Thanks a lot.
@arsitech-ltd3 жыл бұрын
Dear, unconnected element may appear due to unconnected edges or if u use break connectivity option.
@kishoregg01125 жыл бұрын
Thanks a lot sir
@arsitech-ltd5 жыл бұрын
Always welcome. Share knowledge with others.
@subhasubha97014 жыл бұрын
Thank u sir
@arsitech-ltd4 жыл бұрын
Always welcome dear.
@faisalsheikh86785 жыл бұрын
Actually problem is related with given quality parameters, its shows failing in minimum element length, aspect ratio..
@arsitech-ltd5 жыл бұрын
Dear, Go with quality check video of Hypermesh playlist. You will get better idea of element quality.
@VINAYKUMAR-fu8cj2 жыл бұрын
sir can we delete topological points ? it is disturbing my mesh
@VINAYKUMAR-fu8cj2 жыл бұрын
sir can we delete topological points ? it is disturbing my meshing
@arsitech-ltd2 жыл бұрын
Dear, Yes we can remove certain points of geometry, even we can add. Yes this will dramatically disturb the mesh. As at each point there must be a element's node..so modification in points will modify the mesh.
@VINAYKUMAR-fu8cj2 жыл бұрын
@@arsitech-ltd But sir when I try it it rejects my operation and leaves a message topological points can't be deleted. And when i selected in delete panel it selects(says 252 points selected) but when i hit delete entity it is leaves a message as no entities selected.
@arsitech-ltd2 жыл бұрын
Dear, Points can be delete...but not always possible. There are limitations.... Like Point which is at cornor of edge can't be delete.
@VINAYKUMAR-fu8cj2 жыл бұрын
@@arsitech-ltd oh ok, Thank you sir.
@swati55342 жыл бұрын
Whats shortcut key for translate option? I'm not able to hear properly