HOW TO REPLACE PISTON AND CONNECTING ROD ON HYUNDAI 1.8 2.0 NU ELANTRA TUCSON

[@AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

[@hink3206]

Thank you for all these videos, you guys are the best! My wife's 2016 elantra had piston slap and watching your videos made me confident I could rebuild the engine myself. Just got it back running tonight and we saved about $6500 doing it myself.

[@real_vala420]

How’s is it going so far?

[@hink3206]

@@real_vala420 good, 8500km so far and it runs great

[@tayeba.7688]

Man, tell me which car you're gonna buy next so I buy the same. I learned so much from your videos. Thank you so much

[@irisbaez1972]

THE CAMERA IS AMAZING. THE INSTRUCTION ARE AMAZING, AND THE VIDEO MUCH BETTER THAN SCOTTY KILMER'S.

[@ahopefulvessel]

I impress this man has real good heart and respectful heart. Thank you so much for making this video. we need to have good heart to make the world be peaceful. If not, this world will be getting worse, that i have learned from him in this video.

[@jb60135]

Small piston skirts, steel top rings and long connecting rods. A winning combination 👌

[@edgardobautista650]

Que increíble curso excelente, muy bien explicando super bueno gracias

[@JubalLeff]

First, THANK YOU, for how you explain what your doing as you go your videos are most helpful. The tucson 1.6 t-gdi replacing piston rings would be great.

[@aedynthiessen7208]

Love your videos! I have a 2018 elantra with the 2.0 engine and I always come to your channel for how to do the maintenance

[@erwindeleon618]

Great job master mechanico! "Wear gloves when you handle the battery, so it doesn't burn your hands" and no gloves, lol! also learning by watching the mistakes. yes, would like to see engine block removed from transmission, if you don't have it yet, thanks for this video.

[@mecanicageneral615]

That was the piston slap engine. Did you machine the cilinders? Because the head of the piston had the 0.5mm. meaning the cilinders were machined but you didn't took the engine out. How you manage to put super size pistons? Thanks

[@camilosuarezs1398]

Hi guys, amazing video! Apparently, there is damage on the piston walls due to the piston slap. Don't I need to fix anything in the block besides changing pistons?

[@kevinraleigh8046]

I haven’t seen any transmission video for Hyundai, Kia, etc Is this something that might be possible???? Love videos Unbelievably helpful Thank you❤ Savings in the thousands+++

[@chiefdenis]

This is exactly the video i was looking for, thanks a lot for all you do

[@thethinker6257]

Great job in a short time. Appreciate it. 👏👏👏👏

[@dirtrider5001]

hey, im getting a cold start rattle on this engine, already replaced the chain, tensioner, phasers, and the exhaust ocv valve, the intake on it on the way but i am douting it will fix the terrible cold start rattle, also has a small tick even when warmed up, Is this what yours was doing?

[@mikechrist07]

Hey on the 1.6 hyundai accent do i have to press the rods is because i don't have any locking clips

[@lewisborlan1]

Hello thank you for the inspiration to rebuild my 2017 Hyundai. I have a piston slap. How do I know if the block is worth saving? How much can expect to pay at the machine shop?

[@fabioeduardoromeroossa3098]

Excelente video.Gracias por compartir sus conocimientos .

[@Sergio-xk1wl]

Very good video: very instructive and complete. Thank you for sharing it.

[@secondpsycosis9821]

Im trying to fix my 1.6 turbo 2017 hyundai piston. will all this be the same on my engine? is there a different video? can you please halp.

[@shawnrobinson5156]

Do u know the difference between 1.8 .2.0 and years the block is the same I know the positions would b dif without or with direct-injected fuel

[@asadaurbo23]

Do you guys have a video showing how you removed the block to have it bored out for the Hyundai elantra?

[@paulmaland2227]

I'd like to know too!

[@bassmason6451]

Please!

[@terryschnare3381]

same request

[@TM-sb8tr]

Sent it to a machine shop

[@growyourhustlewithjames]

I really enjoy viewing your video.

[@scottseeman349]

Is there a upper and lower difference in the rod bearings half bearing is metal color one is coated almost white

[@brynnjones8799]

Very helpful considering how many NU engines are out there -500 000 ??? My 1.8 does not have any of the US NU problems as the engine came from a different plant . I have remapped mine myself and there is a nice amount of performance in these NU motors.....no GDI direct injection carbon crap build up with these MPI motors.

[@neodidi]

What country/plant please.. Thinking of getting one for my self... My first personal car.. Hyundai Elantra 2015 model year..

[@JARCOStudios]

Hey brother , thank you for the help with the video . I am currently in the process rebuilding my Elantra 2013 but I am having a lot of trouble finding oversized pistons . I need a set of P193 .20 oversized but they are not in stock anywhere in the country apparently . Can you guide me in the right direction for them if possible ?

[@emajadodson997]

Did the engine stop ticking after you installed new pistons?

[@pshluelhk]

If I were this guy I would blow my engine everyday to rebuild it again.

[@shortygarcia9084]

I have a 1.6 Hyundai tuscon number 3 piston spun a bearing I took off oil pan but can't get to it do I need to remove timming cover

[@claymane91]

Nice video! My diesel engine is pretty shaking at idle with a some high blow by, changing the piston rings is gonna be my next job!

[@richardprokopczyk9255]

you guys work very well , I have a 2.0litre hyundai Elanta sport i enjoy youd videoa very much ,Thanks

[@jbirchmusic]

Would you do this if there are metal shavings in the oil pan?

[@Gagandeepsingh-tk3er]

How to open exhaust, u shd show that as well, thanks for rest of info

[@marioorellana5573]

Do you have a video on doing a transmission oil change?

[@elmoflores9150]

New models don't have a transmission dip stick

[@Pesar25]

Great video! Thanks for your efforts. Keep this great working going.

[@leblakipitang304]

Hello, I have the same car having the same issue. Could you fix it for me? I don't want to replace the engine. Please help

[@22Pete]

What was that digital tool used towards the end of the video??

[@obedalinco9960]

Hello do you know the engine number for the hyundai elantra 2013

[@DANNYFIGDESIGNS]

After seeing this video, I've decided not to DIY! 😳 Thank you for the video and hard work though!

[@rich123189a]

Hey great videos! I have a 2010 kia optima 2.4 motor with piston broken off rod on cylinder 3, do you have any similar videos thatll help me with my attempt to redo my 2.4 motor?

[@williamturbeville8296]

you guys should do an episode on 2016 optima. 2.4

[@ahyungrocks5509]

Thank you this complete tutorial. Unfortunately I will have to do this operation on my Nissan 4-cyl.

[@Gagandeepsingh-tk3er]

How about AC coolant? I don’t get that part

[@markymark5844]

I have a 2015 sonata 2.4 l engine shakes sometimes , then I turn it off and turn it back on engine light goes off car drives normal .Then it happens again. I changed the spark plugs coils I sawpped coils and injectors . Same issue . Pops up cylinder 3 misfire. I need you help please.

[@robertfrank9228]

Well done, thank you!

[@Msleelee9487]

hey whats the number on those spark plugs they are the same for 2010 Tucson right? so when I get my parts

[@elijahfrazier3227]

How many days did it take to do this ??

[@mohammadal-gebaly3046]

Awesome , very nice video , thanks

[@howsol8910]

어메이징... 조립하고 볼트가 모자라면 당신은 독일 사람입니다 만약 볼트가 남는다면 당신은 한국 사람일 겁니다 thank you

[@mogomotsibalebanye3945]

Thank you very much guys, this video is very helpful. May you kindly do a video on Hyundai I10 1.2 (G4LA engine) and Kia pica to 1.0 G3LA) that will be greatly appreciated 🙏🙏

[@mogomotsibalebanye3945]

I meant Kia Picanto

[@kirtkerwinlazare4357]

where can i buy the connecting rods for my elantra , it's a 1.6L -gls 2014 model.

[@julielaflare5444]

What if I don’t have any receipts. First oil change was from a family member service and second oil change was from jiffy lube

[@xXChingon2480Xx]

Why do you have to get new bolts?

[@alexander_sinclair]

"have fire extinguisher on site" me: 😳

[@denisediaz4395]

U think I can take the engine out from the top I have 2.0 the only thing I have is a engine hoist

[@orlandonunez6167]

Excellent video

[@bigh8121]

Great video thank you

[@Carnius797]

How long does it take to get to the piston to replace it or the thing? Is this hour the whole job? Sorry I couldn’t watch all of it

[@irisbaez1972]

LIKE MANY SAID IT IS MUCH BETTER TO REMOVE THE WHOLE ENGINE AND PUT IN A NEW ONE.

[@luisduque9608]

Hello guys I need repaccion manual of tha car.. Help me please..

[@sheridanskeenum7767]

😨😨 same probably on my moms ride same same and I didnt think it was that much work mahaha but I did learn new bolts and new timing chain

[@Msleelee9487]

my Tucson had a cylinder 3 go out I was 5 minutes from home had been out of town serviced the car before leaving and 20 minutes almost back the top came off and antifreeze was coming from under the hood I stopped wiped it down put the top back on light went out and got 5 minutes from home light came back on and I drove slow but then I got in the shoulder felt power going I stopped and it died I had It towed down the street to my house and haven't touched it . would changing all the coil injectors and the spark plugs which would be 4 out what else do I need to check i'm hoping with just turning to 90000 it's not locked up I have not tried to crank it until I put those parts in it and check all the liquids again just got the oil changed on it for 7 years had no problem with this car this snuck up on me if you can give me any ideas I can do some things and I will have a buddy coming by great video. if you were standing next to me telling what to do I could do everything you said you do great instructions! Thanks in Texas any ideas would help

[@israelsantana8363]

Hyundai Elantra 2013 1.8 Gls I need to change the piston number 3 but I spoke for the diler and they told me that I have to take it out to see what letter the Disen carries that there is letter A, B and C if you see what letter carries the piston number 3 I will thank you muncho

[@gabrielbiniam7900]

Good job

[@qeisabd8264]

Good Job

[@julielaflare5444]

Hey Hyundai dealership couldn’t do anything for me because it’s a used engine (it wasn’t Hyundai engine) I have to bring the car back from where I got it

[@sumitnarnaware1720]

Good Job bro

[@SamSam-us2fh]

Well done boss 👍🏻

[@irisbaez1972]

THE GUY TALKING SAID CLEARLY: YOU HAVE TO STOP ONCE YOU HEAR THE CLICK AND THE OTHER STUPID KEEP TIGHTING MORE AND MORE AFTER THE CLICK. ARE THEY IN THE SAME PAGE?

[@amanullahkhan9087]

Nice video thanks

[@remigioali]

Muy buenooooooooooo exelenteeee

[@NewBookz]

What can you do to prevent this piston wear, seems to me this engine should have a longer life than this! (I have a 2013 with 25k, switched to synthetic oil now, perhaps next time,buy a Toyota.

[@Motorsportsgeek]

sell it and buy a toyota..

[@mitch1078]

There is a defect with this engine and Hyundai has a special warranty to replace the engine. This is documented everywhere. Go to your dealer and ask for it!!

[@ArizonaRoadService]

Nice

[@Ko_ka_rt]

Good por

[@oldschool1993]

Step 1- Step 1 disconnect your battery and do not wear metal band watches or rings - if you touch a hot lead with one of those you will get a free tattoo.

[@chasl3645]

More like a branding

[@snakesolid6823]

More fabulous while working on cars

[@KartKing4ever]

Bored out Hyundai Tuscon making big power.

[@flight7good687]

My cylinder well has a nipple at the bottom?

[@paulmaland2227]

Can anyone answer: 1. where a source of oversize pistons is and 2. do you need oversized rings (or will std rings be OK)?

[@willf5768]

What was the cost to repair a defective engine that could have been replaced by Hyundai for free. And how long will this repair last being its caused by metal filings in the enqine.

[@felipevalles8041]

You missed the part to disconnect the rods from the old Piston Crown (pins) 🙄

[@HowardJrFord]

Why didn't you guys remove the engine before disassembling and reassembling it ? It would have been much easier.

[@julielaflare5444]

Hello I have the same knocking and ticking noise with my Hyundai Elantra 2016. I bought it in August of 2018 ... currently I have 54,000 miles, with Hyundai warranty almost reaching 60,000 miles would I be able to get a new engine. Bed cause I can’t fix it myself. I’m a women and don’t know anything about cars, I just don’t want the dealership to Rip me off.

[@mitch1078]

Absolutely yes they will replace engine...do not wait! GO TO THE DEALER ASAP!!

[@julielaflare5444]

Thanks I have an appointment tomorrow. I’ll get that done

[@mitch1078]

@@julielaflare5444 Great please let me know what they say as I may need to do this as well.

[@julielaflare5444]

Alright I’ll Get back with you tomorrow... and let you know the status of everything

[@mitch1078]

@@julielaflare5444 Perfect...much appreciated. Be prepared some dealers like to push the customer into proving there is a special warranty for this. Can you get copies of your oil change receipts for the dealer later if they request it from you? Otherwise keep me posted and I can guide you to escalating this to corporate to ensure success just in case! Ultimately it appears your engine should be replaced. Don't let them manipulate you into anything else. Tell them your mechanic (me) checked it out and confirmed it.

[@brethart4938]

That’s like pain in the ass doing the whole one hour procedure while opening any quick video on it while assembling the parts back you guys should make a video on that I know to sabotage anything is easy to mend it back that matters

[@radwan5824]

اريد عربي يفتح سياره النترا ويشرح ماكو كلها مطايه

[@علاءجميل-ي1ض]

ولا واحد يشرح

[@hamidasaleem4059]

kzbin.info/www/bejne/nquxiJ2grrVjmpo

[@c5quared626]

@@علاءجميل-ي1ض one and 3?

[@thetrueking4535]

This would take me 50 hours to do.

[@brethart4938]

While removing fuel injectors thing the fuse must have been removed ahead of time and also the battery 🔋 was suppose to be wire should’ve been disconnected while you guys took the fuel injectors off

[@southernsunny3266]

i hear some sounds like tak tak when trying to start the engine which does not start and when i put a big load on the battery, i hear sth like trying to move inside like voo voo but the engine does not start... shit happened when i was driving with my car on the highway, engine stopped, started giving smokes out of it, and maybe the water fridge was empty... now i try to start the engine, and sth like the pistons in the engine are trying to move doing some sound like vooo vooo... but the engine cannot start... ANY IDEAS ? THANK YOU

[@almostwreckedcars832]

alternator and battery load tested to see if it is one of those components. it sounds like maybe the alternator is busted. this can be done for free at places like autozone, oreillys, pepboys, advance auto parts

[@southernsunny3266]

​@@almostwreckedcars832 i was driving with my car, engine stopped, started giving smokes out of it, the water fridge was empty... now i try to start the engine, and sth like the pistons in the engine are trying to move doing some small sound like vooo... but the engine cannot start...

[@southernsunny3266]

@@almostwreckedcars832 i think the coolant was emptied somehow... can any of these cases, burn down an engine ? or an old piston ring make an engine not moving ?

[@southernsunny3266]

​@@almostwreckedcars832 pls send me an email and once i get a video, i will send you

[@southernsunny3266]

​@@almostwreckedcars832 send me an email pls thanks

[@elmoflores9150]

Just buy a new engine all, the work. With new transmission two, make it easy.

[@williamsheldon5073]

you not replace connected rod

[@thetrueking4535]

Ok. Now do this on a van.

[@mitch1078]

Why didn't you have the dealer perform this under warranty?? Why didn't you explain the reason you didn't let them do it for free??? Very confused!!

[@ERDESH01]

It has a salvaged title.

[@nicolle27g]

@@ERDESH01, so because it has a salvage title they do not stand by their product? My car had some body damage for this reason I bought it thinking that at least the motor would be good and then I have it about a year and the dealership stated that they would pay for half of the new motor, and that I would be responsible for the remainder portion.

[@ERDESH01]

@@nicolle27g I would think so. I think I might've done some research before giving that answer. I dont remember.

[@julielaflare5444]

Also Mitch do you have a email address or phone number?? If you don’t mind

[@elmoflores9150]

Just take the whole engine out, like Chinese people

[@Montyfarfer]

Noice

[@Mike-we3rb]

It’s dangerous when diy people who don’t know the proper way to fix a car post on KZbin. Then people are gonna break their cars.

[@Mike-we3rb]

@DimebagVision editing them actually. I am a mechanic soon to be master mechanic for Subaru. Oops lmao. Messing with the wrong people I see

[@iwizsp]

2 years later and not a single upload 😂🤣😂@@Mike-we3rb

[@elmoflores9150]

R just buy a new car.

[@christianspry1518]

What was the reason for changing them?

[@jamesmbewe527]

Good job