Auxbeam Switchpanel & Chase Pods install on Can Am x3

‪@Auxbeam‬ #auxbeam #canam
SWITCH PANEL functions min 29:40
Install video of the Newest Auxbeam Switch Panel. Highly recommended 👌. Let me know if you have any question.
12% off Discount code: Mario
It is valid for all auxbeam products over 29.99$. code to be active for a year 👍
RGB Switch Panel
auxbeam.com/products/ar-800-m...
The Pod light
auxbeam.com/products/3-inch-l...

[@hectorgarcia9509]

Nice 🤘🏼🤘🏼🤘🏼i ended up doing a 10spot power strip and also a negative 10spot strip for my connections for accessories only using 6 spots with relays , video’s on point 🤘🏼🤘🏼👌

[@GoTimeUTV]

Hell yeah thats awesome. I really dislike electrical work but this will definitely make it easy. This machines can easily use up all the spots 😅 and thanks the video is long but I'm sure it will help a few ppl.

[@hectorgarcia9509]

@@GoTimeUTV sure will and yes not to many spots then it becomes a mess, migth end up doing the new Garmen set up instead off the switch pros.. question who built your cage sr, that look sik with the nets also

[@GoTimeUTV]

@@hectorgarcia9509 the garmen set up is pretty dope 👌. Fabwerx built my cage and they also have the option for the nets. They are located in California

[@jaysonaldape1877]

Where did you get those mounts for the back pods. They look very nice And sturdy.

[@GoTimeUTV]

I bought them from amazon. I took the can am out for a cruise and one was loose. Hopefully it's because i forgot to tighten them

[@jaysonaldape1877]

@@GoTimeUTV I hope it's because you didn't tighten them 😬 I just bought some from Amazon but I don't really like them. But i will need to look again for the ones you have. Thanks 👍🏼

[@timmyb8657]

Random question Brotha but are you able to wire a chase light to this? Most chase lights come with their own switch to toggle through the modes, wasn’t sure if the switch panel would be able to switch the modes or if you gotta use to stock switch that comes with the light

[@GoTimeUTV]

Yeah the strobe requires it's own switch to be able to switch through the modes

[@yeyo5671]

where u get them plastics that go on the sides where you start up your can am? Can you provide the link bro appreciate it

[@GoTimeUTV]

www.amazon.com/17-20-CAN-AM-MAVX3XRS-Can-Am-Glove/dp/B07QV9YZ34/ref=mp_s_a_1_3?dchild=1&keywords=can+am+x3+glove+box+panel&qid=1621192996&sprefix=can+am+x3+glove+box+&sr=8-3

[@Auxbeam]

I didn't expect the pod was mounted towards the back🤣

[@GoTimeUTV]

I will be using the amber covers on it and making it my chase light pods 😉

[@Auxbeam]

@@GoTimeUTV Yea that also sounds like a good idea🤗

[@ernestolinares9811]

I noticed you connected the main wires to the middle bus bar, it was my understanding the it had to be connected directly to the battery due to voltage drop. I just received mine so I want to make sure

[@GoTimeUTV]

Yeah, the middle bus bar has a direct + and an Acc+. The Acc+ will only have power when the ignition/key is on. If you were to connect directly to the battery your control would always be on. Since the install mine has been working great

[@ernestolinares9811]

I’m still in the process of installing mine I also noticed a start/stop sticker could I use a button on the auxbeam controller to start my can am? Similar to the switch pros

[@rocketras]

How does this hold up to the elements. Can it b hosed off to clean?

[@GoTimeUTV]

It does say it has a waterproof rating of IP65. I can say I have hose down my interior when I wash it but I try to no spray water at the electrical switches directly. My switch is still working great since the install 👍

[@diegogallardo30]

What sound system you have on there ?

[@GoTimeUTV]

I have the NOAM audio

[@adamnunez2260]

Do you know what pod mounts I can use for a stock cage ? I’m also trying to use some pods as chance lights

[@GoTimeUTV]

You should be fine with running a universal mount aslong as it 1.5" to 2" in diameter for the x3

[@GoTimeUTV]

This is the link of the ones I got and there universal www.amazon.com/Off-Road-Mounting-Bracket-360-Degree-Aluminium/dp/B082XKHYXL?pd_rd_w=i47uN&content-id=amzn1.sym.e9d1499d-979e-4764-af1a-4b0fc4e747e5&pf_rd_p=e9d1499d-979e-4764-af1a-4b0fc4e747e5&pf_rd_r=ZTDH3CCDF22X3T2H4NX1&pd_rd_wg=l2W3A&pd_rd_r=c173ba9f-e35c-4230-a10b-04c9356cf2ce&pd_rd_i=B082XKHYXL&psc=1&ref_=pd_bap_m_rp_aisle_wdg_289_5_t

[@adamnunez2260]

I appreciate the link. Thank you

[@GoTimeUTV]

@@adamnunez2260 no problem. On the video i said that the mounts didn't work for me but i got them to work. If you're on instagram shoot me a message and I can send you a picture of how they are set up

[@jrcid1337]

how did you hook up the pods, to the AUX switch, trying to hook up baja pods but i have red and black , and it goes into a relay and then they provided switch from them. trying to figure it out

[@GoTimeUTV]

Hey so Baja Design sales a conversion harness not sure if you seen them before that way you dont have to cut the harness www.bajadesigns.com/products/squadron-s2-s1-upfitter-wiring-harness-universal/?sku=640093

[@jrcid1337]

I will check it out but i was trying to figure it out without spending more ​@GoTimeUTV

[@GoTimeUTV]

Oh okay I have a video of how I did it. If you're on instagram send me a message I'll send it to you

[@jrcid1337]

@GoTimeUTV damn thanks for trying I don't though. No social media just KZbin. Lol

[@GoTimeUTV]

@jrcid1337 oh okay well pretty much I cut the harness off before the relay as you won't need the relay anymore since the switchpanel comes with a relay built in and I just run a red and black wire to the switchpanel.

[@terryfrome1641]

Hey man. Can you do me a huge favor. I bought a different version thinking it did the momentary function but it does not. I already cut my on/off switch on the can am. I want to order the different model but don't want to hook it all back up. I just want to use the module itself. Can you measure the panel for me. All 3 sides. I'm hoping I can just swap that out without rewiring it all.

[@GoTimeUTV]

Yeah I'll get you measurements tomorrow morning

[@GoTimeUTV]

The measurements you need are of the part I am holding at minute 16:42 in the video?

[@terryfrome1641]

@@GoTimeUTV no, the actual switch panel. I bought the non momentary one. I just ordered the right one. I am hoping to just swap the switch panel out. Everything is thenexact same

[@fredarceo3062]

I have the same auxbeam wondering how to wire my push to start, I know it has to be on momentary settings I just don't know what wire off the harnes is hot and where goes

[@terryfrome1641]

@@fredarceo3062 you have to have the auxbeam model that has the momentary option. Not all models have them. It will be the most expensive one. Then you run the one wire from the controller then to the switch. Our can am switch is just positive connection wire. Once you press it, it allows the circuit to finish.

[@superjesusgallardo]

Question man! Since the pod lights came with the wiring harness that would connect to the battery. How did you end up wiring them to the switch panel?

[@GoTimeUTV]

I actually recorded a video on how I did it, but I didn't add it. I pretty much used the same harness but modified it.

[@superjesusgallardo]

@@GoTimeUTV alright thanks man!

[@GoTimeUTV]

@@superjesusgallardo I can send you the video on messenger or Instagram

[@diciembre500]

@@GoTimeUTVI have the same question, did you get rid of the switch ? Do yo have the video of how you connected it ?

[@GoTimeUTV]

Let me look for it 😅

[@nokimping4631]

My man why didnt you have the clutch cover on?

[@GoTimeUTV]

Don't remember why I didn't have it, usually when I'm dune riding I leave it off but can't do that here in the AZ trails

[@kingchapo1]

What’s up bro where did you get the window nets ?

[@GoTimeUTV]

I got them as a package when I ordered the cage. It came with cage,roof,doors and nets from Fabwerx

[@kingchapo1]

@@GoTimeUTV ohhhh okay thanks brotha

[@GoTimeUTV]

🫡 no problem

[@kingchapo1]

@@GoTimeUTV yeah I think ima just custom make them myself fuck it lol

[@GoTimeUTV]

Yeah mostly all window nets have to be custom made. If you where to make the frame you can just take them somewhere to get the nets stiched on

[@yeyo5671]

which one did you get bro? cause I went to the one in the link in the bio and my auxbeam module didn’t flash😞 feel like I got scammed

[@GoTimeUTV]

Did you get the AR-800

[@yeyo5671]

@@GoTimeUTV yessir the one that you linked up in your bio I ordered the same one but I think I got the wrong one I just finished installing it but they won’t flash

[@GoTimeUTV]

I went on the link and thats the one I have aswell, they are set up to just turn on but have to program to flash like on min 32. Did you try that already

[@yeyo5671]

@@GoTimeUTV yea bro I tried to press it 2 times to get the pulse but I would just turn off and back on

[@GoTimeUTV]

I went on the link and thats the one I have aswell, they are set up to just turn on but have to program to flash like on min 32. Did you try that already

[@antonioaguilar1968]

What sound system you have?

[@GoTimeUTV]

It's the NOAM Audio system

[@antonioaguilar1968]

Is it good? Also y comes with woofer?

[@antonioaguilar1968]

Any light bar brand that you can recomendme for my shock mount tower I believe some fox uses 10or 12 inch

[@GoTimeUTV]

I've been using it for about 2 years now with no complaints. There is a kit with a woofer but I didn't get it.

[@GoTimeUTV]

For the front shock mount, I think heretic or baja design are the best brand ones