AVENTOS HK top with SERVO-DRIVE: assembly | Blum

This video shows the individual assembly steps, commissioning including error detection, synchronisation and collision avoidance of SERVO-DRIVE for AVENTOS HK top.
More information about the AVENTOS HK top: www.blum.com/aventoshktop
#AVENTOS #assembly #SERVODRIVE

[@pernaboys]

Awesome. Is there by any chance a setting to control the jack opening manually?

[@BlumFurniturefittings]

Hi, sorry for my late reply but we need to check your question with our product managers. Unfortunately we don't know what the jack opening is.. can you please explain it a little more precisely? Thanks a lot and best wishes from Blum Austria, Lisa

[@pernaboys]

@@BlumFurniturefittings Hi Lisa, Thank you for your response. My question is, if there anyway to control the degree of door getting openned. like openning the door half way. I wanted to use your jack as an stand for an ipad instead of a door. I wanted to use your jack as an adjustable stand for ipad

[@BlumFurniturefittings]

@@pernaboys Hi again, now we think we know what you meant :) The opening angle can be variably adjusted between 75° and 107°. There is another video where you can see how you can do that: kzbin.info/www/bejne/rZmkm3yNaZmVe5o Hope this helps. If you should have more questions, please don't hesitate to contact us! Best wishes, Lisa

[@pernaboys]

@@BlumFurniturefittings Thank you so much for your help :)

[@aror7560]

Wir haben einen grifflosen Klappenschrank von Nobilia mit 80 cm breite und 40 cm Höhe, im Moment nur mit einem einfachen Drucktüröffner montiert, wobei dieser es absolut nicht schafft, die Klappe zu öffnen. Wir haben Interesse an diesem System mit Servodrice. Welche Teile werden alles benötigt? Und brauchen wir die Variante mit vormontieren Euroschrauben oder mit Spanplattenschrauben?

[@BlumFurniturefittings]

Hi Ar Or, vielen Dank für ihre Frage. Leider lässt sich das nur schwer beantworten, weil, wenn TIP-ON die Klappe nicht aufbekommt, ist eventuell ein falscher Kraftspeicher montiert worden, und je nach Kraftspeicher (AVENTOS HK vs AVENTOS HK-S) lässt sich SERVO-DRIVE leider nicht nachrüsten. Um also herauszufinden, ob sich bei Ihrem Klappenbeschlag SERVO-DRIVE nachrüsten lässt, wäre es am Besten wenn Sie sich bei Ihrem Blum-Ansprechpartner melden: www.blum.com/contact Vielen Dank und liebe Grüße aus Höchst, Lisa

[@mohammedshwayat472]

وين بحصلهم لو سمحتم مع العلم اني ساكن بالاردن او اذا فيه بالكويت لاني مقيم هناك

[@BlumFurniturefittings]

Hi Mohammed, thank you for your question. Here you can find our sales office in Jordan: www.blum.com/eu/en/contact/sales-offices/?fieldofoperation=Asia&location=Jordan& or if you are in Kuwait: www.blum.com/eu/en/contact/sales-offices/?fieldofoperation=Asia&location=Kuwait& Best wishes from Austria, Lisa

[@Дока-Мремонтмебели]

sehr gut

[@nathangroulx9678]

What happens if the power goes out can the unit still open manually?

[@BlumFurniturefittings]

Hi Nathan, you can always open and close the lift system even if SERVO-DRIVE isn't powered. Best regards from Austria, Stefan

[@arekrybicki7177]

SUPER 🙏👍

[@tatosinghh]

Hi. Can this be used for Vertical doors? (Like normal cabinet doors) by installing one at the top and the other at the bottom?

[@BlumFurniturefittings]

Hi tatosinghh singhh, Thank you for your question. Our AVENTOS l lift systems are not constructed for this purpose, so we do not recommend it. We cannot assume any warranty for this solution. Kind regards from Austria, Beste.

[@rendfers]

Межгалактическая технология))

[@nathangroulx9678]

I live in canada Ontario where is best place to get some of these servos for my kitchen upgrade?

[@rendfers]

@@nathangroulx9678 Type Blum in the search, I think you have an official representative, there they will tell you which ones are better to take

[@rendfers]

@@nathangroulx9678 Blum Canada Ltd 6775 Maritz Drive MISSISSAUGA ON L5W 0H5 CANADA

[@LuisLopez-mc7np]

Me pueden explicar porque no me.activan unos motores que tengo, ya seguimos los pasos que nos indica y nada

[@BlumFurniturefittings]

Hola Luis, lamentablemente no puedo ayudarte de inmediato porque no puedo ver el problema... Por favor, dígame de dónde es usted y podré remitirle a la persona de contacto de Blum que corresponda. Muchas gracias y saludos desde Austria, Lisa

[@rakeshdhatrak7732]

Hello sir...is available in India?

[@BlumFurniturefittings]

Hi Rakesh, thank you for your question. AVENTOS HK top is available in India :) More information and distributor information you can find here: www.blum.com/in/en/products/liftsystems/aventos-hk-top/programme/ Best wishes from Austria, Lisa

[@hassanrana4874]

Can't sync servo drive with aventos hk

[@BlumFurniturefittings]

Hi Hassan, thanks for your message. We have a different drive unit for AVENTOS HK like the one for AVENTOS HK top. You can find out how to synchronize AVENTOS HK in the following video: kzbin.info/www/bejne/fHvOgH2GgM1nf9U I hope I could help you. If you need additional information please let me know. Best regards from Austria, Alina

[@benadam13]

Нихуёво , но дорого .

[@juanluisvalenciaga6060]

The mechanism is robust, the arms, on the other hand, are extremely weak and break after a maximum of one year of use, a shame. The connection between the fixed arm and the swing arm is made of thin and poor quality plastic. And therefore, it is this union that supports all the weight when the assembly is opened or closed.

[@BlumFurniturefittings]

Hello, this should definitely not happen. We carry out various quality tests on our products, such as a movement and load test, corrosion test, material test, etc. Could you send us a photo or video of your AVENTOS fitting so that we can take a better look at it? Please send an email to [e-mail] or via Instagram to instagram.com/blum_group/ Thank you very much. Best regards from Austria, Anna

[@rickvinmi7141]

Perhaps nice, but worthless instructions and worthless videos on how to install. AVOID!!!!!!!

[@BlumFurniturefittings]

Hi Rick, which step of the instructions is unclear? With your feedback we may be able to do better assembly instructions in the future. Best regards from Austria, Stefan