The Best 350Z Oil Cooler! Z1 Motorsports Oil Cooler Install

[@JS-ny9ge]

Just got through installing the 34 row Setrab cooler in a 2005 Z. Based on watching your video, I ground even those two little plastic tabs that stick out on the right side at the bottom so I could lower the mounting plate on the bottom as low as possible. This paid off as it fit on the top!! Every 16th of an inch matters! Thanks! The other thing is there is no "lip" that needs a washer on the bottom with my car? Small differences in model years no doubt.

[@avengednick]

Hey man, so glad the video helped with your install! And you're not lying, every little bit really does count. The 34 row cooler is an absolute unit!

[@Apixelados]

Have you tried on track? How does it behave? Works well for daily use? Got a Nismo that goes up to 130°c on track

[@avengednick]

I haven't had a chance to test it on the track yet and I don't have a oil temp gauge, so I can't say exactly how much it decreases the temp by but I talked to a lot of people who ran it on the track and saw noticeable decreases in temps.

[@alexzandercolten9628]

You prolly dont give a damn but does someone know of a way to get back into an instagram account..? I was dumb lost my login password. I appreciate any assistance you can offer me

[@musajeremiah9328]

@Alexzander Colten Instablaster :)

[@alexzandercolten9628]

@Musa Jeremiah Thanks for your reply. I found the site through google and im in the hacking process now. I see it takes a while so I will reply here later when my account password hopefully is recovered.

[@alexzandercolten9628]

@Musa Jeremiah it did the trick and I now got access to my account again. I am so happy:D Thank you so much, you saved my account !

[@jkansas2045]

Nice video

[@avengednick]

Thank you!

[@1MADZ]

I don't want to do this now 😂

[@avengednick]

It’s not THAT bad, I promise. Haha and if you have either of the smaller cores it will be way easier

[@oa1583]

Do u have to put oil in the oil cooler before u install it.. and if i have a long cold air intake the 34 row wont not fit

[@avengednick]

I found it was easiest to fill it before installing it because it was so tall. With the smaller two core options you may not need to. I don’t know how close your cold air intake sits to the core support but the cooler is pretty low profile.

[@oa1583]

@@avengednick i have looking at vids all day i see alot of g install the oil cooler on the passenger behind the steering cooler and the driver for the transmission cooler

[@angelz3447]

What did you use to tighten down the sandwich plate?

[@TheKeatyBear]

What bash bar is this?

[@avengednick]

TheKeatyBear it’s a Street Faction

[@alexavgeres9283]

Final install looks excellent. Kit appears to be well designed with ample hardware to complete the job.

[@AluminumFloorPoor]

Damn man. Great content. I watched the whole video before I saw your views. I hope your channel grows dude you deserve it! Also sold me on the 25 row after seeing the struggle lol. Just wish I could see if the z1 cold air could still fit with the oil cooler. Almost thinking I might have to go with short on the oil cooler side and could do cold air on the other.

[@avengednick]

Thanks man, comments like this seriously make my day and keep me inspired to keep making content! Haha yeah, the 25 should be a bit easier to install. Definitely wasn't expecting the 34 to be the boi that it is

[@johnhinds2216]

hey man looking to run that exact setup the 25 with the Z1 cold air intake did you end up doing it? i need to know how it will all fit

[@jabari7995]

you should have more subs

[@avengednick]

Thanks man, going to keep grinding and it will come in time!

[@izwhatitiz510]

Super dope video bro! I got a 350z project as well I'm trying to get it ready for track too!! I'm kinda behind comparing with the work you already done but I'll be up there soon lol again good job and keep your videos coming !👌🏼👍🏼

[@avengednick]

Thanks my dude! Hell yeah, it’s a great car at the track. Can’t wait to get back out there once stuff opens back up here. Got more Z videos on the way!

[@rushyplays1678]

How the fuck does it bolt on my rivets arent working

[@avengednick]

Are you bolts not going in to the rivet? If so, it likely didn't seat properly.

[@aaronmayoDeeznuts]

Link to this product

[@avengednick]

Sorry for the delay in getting back to you, it's this kit: www.z1motorsports.com/z1-products/z1-motorsports/z1-motorsports-350zg35-oil-cooler-kit-p-5265.html

[@vincentlevesque30]

Great content, great editing, you deserve more subscribers!