Avet SX - lever drag, with stiff handle problem, and pinion bearing upgrade.

Avet SX - lever drag with the stiff handle problem, from a over tightened lever drag fix, and a full avet reel bearing upgrade to abec 7 stainless steel bearings, this how to guide covers the replacement of the avet pinion bearing, and avet drive shaft bearings, and avet reel spool bearings, and a full strip down and rebuild of the avet reels. / @starfishseafishing
00:00. avet reel service intro.
00:58. avet reel strip down spool bearing's.
06:09. avet reel gears and reassembly.
more fishing reel service guides...
fishing reel service videos. • Daiwa Sealine - X30 - ...
fishing reel service. • Penn fathom 15/12, mk2...
fishing reel service guides - Penn fathom 2... • Penn fathom 15/12, mk2...
reel service playlist. • Fishing reel service H...
follow me on facebook and instagram...
facebook = profile.php?...
instagram = / starfish_seafishing
I Hope you enjoy my sea fishing videos, and please hit the like button, and please SUBSCRIBE button and please turn on notifications, and bell icon.
/ @starfishseafishing
#avet #avetreels #fishingreels

[@CrabberPA]

I know this is an older video, but I was wondering if your could provide new links to the bearings. The links in the description to the eBay listings aren’t valid anymore. Thanks!

[@javiperez9091]

good explaining, appreciate your video

[@StarfishSeaFishing]

if you found this type of content useful or helpful in anyway, please can you help me out and hit the like button on the video , and please subscribe for more content thank you. it helps me work out what i should be doing on the channel direction etc thanks again. kzbin.info/www/bejne/a3ukpmRulJ2CfLc&ab_channel=StarfishSeaFishing

[@garethwilliams3333]

Another excellent informative video

[@StarfishSeaFishing]

thanks Gareth

[@dongski188]

i think there's a serial number engraved on those bearings...if you can just post it,so that it is much easier for us to look for it..tnx...

[@StarfishSeaFishing]

Thanks, I no longer have the reels

[@stevensuhar8302]

Maybe I missed something, but are the original Avet bearings sealed in different fashion? Avet has never bern my favorite, I sell them and end up buying them again out of sheer boredom in rainy Oregon.

[@mr.mister7489]

Boss i have a MXJ6/4. When i first open to clean it, i noticed that the drag washer is attached to the housing. Can it be replaced if ever its worn out already. Thanks.

[@stamatis1967]

Hello is greaT VIDEO but you say the diamension of that bearing the inner one i mean i would be thankful if can

[@StarfishSeaFishing]

sorry i dont the answer

[@robertmceuen3630]

For what Avet reels cost- and bing made in USA it really pains me that they should have to be "upgraded". Should last 20 years if kept clean and lubed.

[@johngallagher221]

Hi Paul great video,where do you obtain your bearings from, are Vauxhall's your new sponsors?

[@StarfishSeaFishing]

hahaha cheers john bearings can be found on ebay etc if you know the exact size you can get them alot cheaper from china aliexpress etc and its all work at the monment john haha

[@mdees88]

Boca bearing is where I get mine from

[@StarfishSeaFishing]

@@mdees88 thanks

[@jpap967]

What is the exact sizes of the bearings being replaced?

[@mackayjamesagton905]

up

[@robertmceuen3630]

lubes. I continue to watch, I am becoming amazed. The reels come with plastic parts? Don't come with top quality stainless bearings? I was thinking about an Avet purchase, but no way now. Excellent video though Thanks.

[@bobh1208]

I'm afraid you're being wildly misled. "Plastic bearings"? This guy doesn't know the difference between a sealed bearing and a shielded bearing (look them up), and is most definitely not putting "thrust bearings" in this reel (look them up). And, ABEC-7 bearings are by no means necessarily more corrosion resistant, and are only advantageous in high RPM applications where tightest tolerances matter. And, moreover, shielded bearings (like he is putting in) are MORE prone to water ingress, NOT less, than sealed bearings are. And, it is not the side covers of a pinion bearing that get crushed by mis-using a lever drag reel (look it up). Temporarily remove the shields to fully grease-pack any bearings in problem areas, and ANY reel's ball bearings will hold up* (anti-reverse "bearings" are a different story... but, the Avets don't have them). *Unless you crush the pinion bearing itself (NOT its side covers!) (but, you can look up how to avoid mis-using any lever drag reel, to prevent that).

[@robertmceuen3630]

@@bobh1208 I get what you're saying about the bearings, but the constant "look it up" kinda puzzles me. Look it up where? A bearing textbook?

[@bobh1208]

@@robertmceuen3630 That was just in case you didn't wanna take my word for any of that (and so I didn't have to long-windedly go into seals vs shields, and into the entirely impractical [to use in reels] price of aftermarket actual-thrust-bearings, and into fully grease packing bearings to prevent saltwater seizures, and, into how out-of-bounds side load on a normal radial pinion bearing will crush the balls against the side edges of the races' grooves... and, so on... but anyway... seems like the interwebs will tell you more lies when you didn't ask, than when you do... especially if one hones each question).

[@csapper]

None of those bearings are hard to remove. You can literally pop them right out. I cringed watching all the extra steps to remove bearings when you can just catch the inner edge from the opposite side of any bearing and push it right out. Most of them will fall out if you gently tap on a table

[@StarfishSeaFishing]

agree unfortunately it was sized tight

[@ronaldo77782]

This avet look good but they are like Ford cars they suck

[@StarfishSeaFishing]

the raptors are much better