✅ Avoid White Edges on Silhouette Print and Cuts with this Trick

[@flarpster3675]

THANK YOU!!!!!

[@tabztabzliejudacleson]

Thank you for the internal offset

[@veronicarodriguez2127]

Do you have a video showing how to use internal offset with multiple colors on a design

[@ramsey4630]

when i use internal offset it still cuts the original line and the internal lines any suggestions?

[@tammypadilla1024]

What cut settings do you use for that particular paper to make it weed so clean?

[@SilhouetteSchool]

Hey there! Skip to 5:19 in the video and I explain.

[@swtxvi3txhuni]

what kind of stand is that cameo pro sitting on?

[@SilhouetteSchool]

Hey there! It is a stand from another machine, but I cannot recommend it because it does not secure to the stand.

[@joshjulian1997]

What kind of mask would you recommend to use for printable?

[@SilhouetteSchool]

I'd recommend finding Heat Transfer Mask like this at Swing Design: www.swingdesign.com/search?type=product&q=heat+transfer+mask

[@don251097]

Do the colours fade after a few washes when you use printable HTV?

[@SilhouetteSchool]

Slightly, yes.

[@don251097]

@@SilhouetteSchool thank you

[@jenniferbernal5360]

Once the Internal offset is done you set the settings to cut on the offset ?

[@SilhouetteSchool]

YES! Here's a full step by step tutorial: www.silhouetteschoolblog.com/2022/01/easiest-way-to-add-bleed-around.html

[@genevievegutierrez1871]

I thought this video was to show u how To do the internal off set!

[@joshjulian1997]

I always get nervous to use the press time or Temps the printable says to use lol.

[@SilhouetteSchool]

The manufacturers' settings are always a good starting point!

[@Moneybags8989]

Can someone please help me. I need print bleed on the insides of my images. Im not boring and do solid designs mine are things like floral wreaths with empty space on the inside of the wreath that will be cut but because my print then cut is always out no matter how i calibrate it and because i refuse to do massive designs i want tiny intricate floral designs with extremely tiny twigs and spindles etc i want NO WHITE BORDER EVER. I can only get the outside to work but the inside is all out of alignment with no print bleed even though its a png automatically traced. I hope your answer isn’t you just wasted your money because it can’t.

[@SilhouetteSchool]

You need to do an internal offset and leave that as the cut line.

[@Moneybags8989]

@@SilhouetteSchool its already done that i have designer edition. The internal area cuts but there is only print bleed on the outside of my design not the inside that gets cut too.

[@shermainedavis2284]

It would have been helpful to see how you did the internal offset instead of seeing the finished result. This is so frustrating and I am about to give up.

[@SilhouetteSchool]

It's very difficult to show how to do that type of thing on a live video but I have many many blog posts on this. www.silhouetteschoolblog.com/2022/07/5-ways-to-add-bleed-in-silhouette-studio.html