AWESOME DIY SPEAKER | diy speaker (Part 2)

[@tommaxcy7757]

Great job. Have done similar things using 3/4 inch plywood. Thin vertical lines from the plywood would give these speakers a cool look.

[@Thinking_Man]

21:56 The sound of silence is very impressive.

[@sumanthbhat1041]

Excellent👍 replicate of bose waveguide technology better than original bose itself

[@akrocuba]

Nice job!!!

[@Solidworksmaster]

Thank you! Cheers!

[@sbrajeshraju2870]

Very nice

[@Solidworksmaster]

thanks for comment my friend!

[@sukhwindershelly1379]

Nice sound

[@Solidworksmaster]

Glad you like it!

[@michaelaldan6969]

amazing job you did !!, I applaud people (like us..) whom with limited resources can make something where others would simply fail or give up and buy something...well done and don't listen to the haters !

[@Solidworksmaster]

really appreciate your comment my friend! thanks for watching.

[@dickystipper4887]

Limited resources? Did you see the big CNC by chance?

[@anant.vtangramstrategiccon6618]

Is the diver bose ? Good combination for your craftsmanship and speaker unit.

[@Solidworksmaster]

yes, it's bose driver, thanks for watching my friend!

[@markceci9896]

Alot of work for a small speaker. The footing assemblies look cool but probably not required. Thanks for the video...really nice.

[@Solidworksmaster]

thanks for compliments my friend!

[@KetansaCreatesArt]

Awesome job. The frequency loss due to camera microphone, the youtube compression, then the processing at the end of viewers devices, and still this kind of sound, I believe these sound really awesome in actual presence. 😎 When I was going to build mine, I asked and showed around about what my building ideas are. People were like "are you crazy?" "Thats not gonna work", "You will kill the drivers", "study around before you ask", "download this app and check your parameters", ....etc....etc But when I built, it came out to be one of the worlds awesome sounding system. 🙂

[@Solidworksmaster]

Thanks for sharing my friend!

[@JiveDadson]

Beauty! Pro tip: When posting multi-part videos, put links in the description of each vid to the others.

[@Solidworksmaster]

thanks for advise friend!

[@thehifiwifiguy]

Pro Tip: Use an actual microphone when trying to dem the way speakers sound instead of a crappy phone.

[@IowaKeith]

Was hearing plenty of bass on my home theater system. Sounded pretty good actually. Good job

[@mikenaughton4298]

Thanks for showing us your build. Bet they sound great.

[@Solidworksmaster]

thanks for watching my friend!

[@craneraaudiovideo]

This is Bose style technology... That's why Bose speakers sound acustically amazing.. Good job on the post design.. looks awesome.. the acustics sound very good .. I can hear it ..

[@Solidworksmaster]

thanks for comment my friend!

[@ajaygoswami8126]

Just nice buffle system

[@Solidworksmaster]

thanks for watching my friend!

[@nerd9992]

amazing job.

[@Solidworksmaster]

thanks for compliment my friend!

[@valveman12]

Very nice build. I bet they sound amazing in person.

[@hjepot]

Khá mộc mạc đó bác

[@Solidworksmaster]

thanks bác!

[@herihernawan5947]

Sae pisan hasilna, sanes hungkul kualitas soanten na tapi oge nilai seni na nyongcolang kumargi di tunjang ku alat canggih

[@Solidworksmaster]

thanks alot for your comment friend!

[@MaitreNinjaPAT]

Très Sympa l'esthétique, J'aime Beaucoup Une version 3 voir 4 voies serais vraiment impeccable.

[@Solidworksmaster]

Merci pour le compliment (google translate)

[@ellisargamer9248]

Would really like to see what these can do with a song with proper bass. Good job though pretty cool. Would also like to see what could be done with 8 inch drivers in a box with similar design, would they sound like 12 inch drivers?

[@wolfman773]

Very nice. May you share blueprint. I would like to diy a pair like that.

[@DeepMagas]

Looks good

[@Solidworksmaster]

thanks for watching my friend!

[@varunrpanicker83]

I believe you got concept from some other speaker. Really very good work man. The build was good. The bass was as expected. Need more samples.. keep the good work and awesome tooling man. 👍👍👍

[@Solidworksmaster]

yup, i took the concept from other speakers . thanks for watching my friend!

[@AmIonArock]

They look awesome

[@Solidworksmaster]

thanks for your all comments my friend!

[@MB-fu9rw]

Bose done this. In plastic but channelled the bass hole aswell. Computer router could do so much.

[@tttuberc]

It seems the KZbin mutes the sound in the sound test / demo section

[@manuelgoletto6789]

Very nice. Iwould like to build a pair. do you have the specs of the drivers? Amp board and crossover? anything else that I forgot? thank you so much.

[@johnoberle9750]

The one thing I question is stuffing the port with insulation in part 1. I understand how it works in a box . Wouldn’t it muffle the port and nullify it’s purpose. Awesome video.

[@swimon]

I want to know the answer to this as well

[@bobkeller8383]

It just filters out some of the highs

[@AmIonArock]

Next project: JBL Paragon system??

[@TheLeoandre]

Gostaria que as pessoas que deram deslike fizessem um video fazendo melhor! O trabalho desse homem é sensacional!Parabens!Muito bom!

[@Solidworksmaster]

thanks a lot for your comment my friend!

[@Solidworksmaster]

Thanks for watching friend!

[@YuraSushhev1984]

Жаль что без комментарий. Отличная работа! It is a pity that no comment. Nice work boys!

[@Solidworksmaster]

you're very welcome my friend!

[@fonger38]

hey remember when ya had a cnc router but you used a screw driver as a chisel..... lol

[@Solidworksmaster]

lol, thanks for watching my friend!

[@Lateral_G]

I was thinking the exact thing while he was "chiseling" lol

[@berniedofitas1891]

Did you use a subwoofer when you play that music? If not, that two enclosure that you made are Excellent!

[@Solidworksmaster]

no, there no subwoofer was added in test sound, thanks for watching my friend!

[@arena_rock_man9030]

It's too bad that that's the only song KZbin allowed to be played

[@EddieMcclanahan]

A lot of work went into those, and it shows in looks and the sound coming from them is awesome.

[@Solidworksmaster]

thanks for compliment my friend!

[@TruongDinhThai]

@@Solidworksmaster bạn ở việt nam?

[@Solidworksmaster]

@@TruongDinhThai mình ở việt nam nhé bạn, thanks bạn đã xem!

[@TruongDinhThai]

@@Solidworksmaster tôi thấy cái Lioa nên đoán vậy. Bạn có nhận làm loa kg? Tôi đang tìm hiểu để làm loa BLH cho fostex 206

[@cayenne7792]

hmm they sound exactly like my pc speakers...weird

[@Solidworksmaster]

thanks for your comment friend!

[@MetaView7]

LOL

[@richblaker9087]

Cayenne... Just watched two more videos, then suddenly 'got' your comment, duh! Very funny, sorry I was so slow!!

[@bambangnugroho7192]

Great build and result, perhaps it would be nice if You include the information of speaker You installed and shortened the video. Thanks a lot for the vid's

[@reble_uwu3405]

Cayenne that’s funny they sound exactly like my headphones

[@fx77me]

Very nice indeed! 👌👍

[@Solidworksmaster]

thanks for compliment friend!

[@SDB777]

I was rather disappointed the outside of the cabinet was left 'blah'....I did thoroughly enjoy the CNC set-up and execution

[@leonsijtsma]

Sounds amazing

[@Solidworksmaster]

thanks for your comment friend!

[@antimomangiacapra4165]

BUONGIORNO E' OSSIBILE AVERE QUESTO PROGETTO? (BUONGIORNO IS IT POSSIBLE TO HAVE THIS PROJECT?)

[@nerdmike3778]

what amplifile u use to power of this speakers?

[@francispp81]

Good work👍

[@Solidworksmaster]

You're very welcome friend!

[@Fazaian726]

Any reason for the zig zag canal design and why did you fill the canal with that yellow cotton doesn't it stop the sound flow?

[@Solidworksmaster]

the yellow cotton doesn't stop sound come out, it turn to more important to reduce some unneccessary resonance inside box and make the sound more tightly, cohesion and clean

[@era7928]

yellow cotton is called glass wool. and the tunnel help boosting the bass.

[@Shabbymannen]

DISCLAIMER: I'm no expert at all. I don't know shit about audio. I might be totally wrong. I think it's meant to be/work like a transmission line speaker. The canal is a waveguide for the back wave from the driver, and it's purpose is just to get rid of it. What comes out of it should be mostly low frequencies, ideally nothing at all. Since it ports out in the front, he might have done the math and made it the right length to have those frequencies be in phase and boost the bass. Regardless, it's not like a normal port, not a lot of sound should come out of there. It's meant to make the driver work with less effort.

[@Solidworksmaster]

thanks for your comment friend!

[@isaacmadhavan]

Thank you. This makes a lot of sense to me.

[@wingowingo2928]

How much total cost besides CNC work?

[@Solidworksmaster]

i'm not estimate how much does it cost but maybe under 80usd, thanks for watching friend!

[@pepeltoro444]

amazing work brother! anyone know what the song name is 27:00 ?

[@Solidworksmaster]

that's one of favourist song , it's "the poems of chinese drums", thanks for watching my friend!

[@thehifiwifiguy]

Why are you using your phone's microphone?

[@giuseppebosco4269]

how did you calculate the trumpet?

[@Solidworksmaster]

base on your feeling and experience to calculate it and failed some time . thanks for watching friend!

[@waynethompson8416]

FYI, near the end there were lots of video of the speakers and the computer, but NO SOUND!!! Also, what was the purpose of the "insulation?" in the speaker and why only in part of it?

[@Solidworksmaster]

due to copyright claim i need mute some sound track but still have at the end of video, the insulation to prevent mid& high frequency go out of tunnel and this make sound more clear &clean . thanks for watching my friend!

[@davidmayoral]

To convince me, I need to hear them live, because on video they did not convince me!

[@Solidworksmaster]

thanks for watching friend!

[@bubbleone6526]

@@Solidworksmaster why did the sound cut for most of the demo?

[@Solidworksmaster]

@@bubbleone6526 just because most of sound track got a copyright claim so i need mute it, thanks for watching m friend!

[@AmIonArock]

Ok, How do they sound to you? Are you getting any sound from the bottom ports? maybe do a vid with a mic. and put it next to the ports so we can hear the sound ty

[@SYnthFeel]

Awesome idea but its counterproductive work wood with the drive speakers by your side, with dust and wood particles.... Other problem its the desing, you need to put the twitter in the upside, and the mid and "bass" driver in the down side! you can upgrade the speakers building the sub speaker and taking a good amplifiers. Good look m8

[@Solidworksmaster]

thanks a lot for your comment my friend!

[@kristiankautto7616]

thats just wrong,where you place the speakers dont matter the least if you dont know the listening hight.

[@x.b.o]

The bass hast some distortion. Even that COOL project!

[@Solidworksmaster]

yes, the speaker produced some distortion when playing heavy bass, thanks for watching friend!

[@bryanrmcnair01]

You gone only hear it as "GOOD" as what speakers you are playing it on...SO CHECK YOUR BASS DISTROTION!

[@matthewbarnhart5874]

tweeter is low on one speaker high on the other

[@Solidworksmaster]

you having a sharp eyes, thanks for watching friend!

[@umershah5855]

FINALLY i wasted 30 mints To watch both parts ... USELESS NO BASS 🤣🤣🤣💯

[@Solidworksmaster]

did you watch till end of video? no bass? thanks for watching friend!

[@Fazaian726]

stop using cheap chinese headset lol

[@umershah5855]

Waseem zia LOL! I did watched through my AMLIFIER

[@Ran-dom1]

had huge bass, umer your amplifier plus chinese headphones suck!

[@Solidworksmaster]

thanks for watching friend!

[@janbenschop7597]

Couple of questions: Why don't you show the measurements, either frequency response or waterfall plot to reveal stored energy? And why, for heaven's sake, did you place a planar tweeter closer to the listener than a piston driver with higher mass, which would throw off time alignment? Nice design visually, but somewhat off the mark...

[@renanjardelli]

Creio que deve ter ficado bom, mas poderia ter colocado algumas músicas com graves diferentes pra se ter uma noção de como ficou! Mas parabéns foi um trabalho excelente!

[@Solidworksmaster]

thanks for compliment my friend!

[@deygun137]

i think the sound is amazing for its size

[@thehifiwifiguy]

You think the "sound is amazing"? Ummmm, WTF are you talking about? It was recorded with a horrible microphone.

[@neimarcasagrande7863]

👏👏👏👏👏👍Muito bom

[@Solidworksmaster]

thanks for watching friend!

[@musicbossmusicboss4296]

Why u didn't use NCS sounds

[@Solidworksmaster]

NCS sounds not good enough for sound test, i like to use standard audiophile music for test but got a lot of copyright claim, so i have to mute some sound track , thanks for watching my friend!

[@musicbossmusicboss4296]

@@Solidworksmaster uh ok got it, i want also make like that speaker

22:47 the title of the music ?

[@Solidworksmaster]

22:47 or 26:47?

[@Solidworksmaster]

if 26:47, the song is "the poems of chinese drum"

[@Higgles24]

very nice design of speakers. really modern looking. I thought maybe put a slight wood stain on to finish the look and bring out the detail of the wood grain. great work mate. keep it up :)

[@Solidworksmaster]

yes, thanks for watching my friend!

[@isaacmadhavan]

What wood? Isn't it ALL just MDF?

[@snake9058]

Nice 👍🏼

[@Solidworksmaster]

thanks for your compliment friend!

[@nerdmike3778]

u use subwoofer?!

[@Solidworksmaster]

no subwoofer, thanks for watching friend!

[@arcyoon]

It's estimated that low-pitched sound space will be very large......I hope you can play popular pop songs as well.

[@Solidworksmaster]

thanks for comment my friend!

[@TheSqoou]

No paint ?

[@Solidworksmaster]

no paint, i was applied verneer for it, thanks for watching friend!

[@renomtv]

is that a real chisel or a plain ol screwdriver?

[@Solidworksmaster]

that's not a chisel, i've sharpen the screw driver then use as chisel, thanks for watching friend!

[@zackphilis3131]

21:55 the frequence have to be very low

[@Solidworksmaster]

thanks for comment my friend!

[@90210sky]

There is obviously a subwoofer inlcuded in the test, such tiny speakers in a fiberglass-clogged-ported enclosuere would never produce decent bass. Love that song "said nobody ever"

[@Solidworksmaster]

there no such things like subwoofer was added my friend. That speaker driver i took form bose speaker, not TV's speaker, thanks for your comments friend!

[@zachiro20]

Dude, amazing box and amazing bass reflex work. Did you came with it or you've taken that from another speaker?

[@Solidworksmaster]

thanks for your compliments friend, this idea i took a little bit from another , and the result quite good to me

[@nova290r]

Carlos Lopez it is a transmission line speaker not a Bass reflex

[@spinyabastardspin3479]

You do so some woodwork. You attach some speakers. What's the big deal?

[@СергейМихайлов-й1м7н]

Greate job! 21:51 no sound, check please

[@Solidworksmaster]

due to copyright claim issues , so i need mute some tracks in sound test, you can check out the sound in Final sound test, thanks for watching my friend!

[@harmeetvirdee3658]

What's the noise at the end? Does he have any music we can recognize???? Agonizing!!

[@Solidworksmaster]

thanks for watching friend!

[@alexyegon2381]

There's free music on KZbin without copyright, speakers appear capable but your taste in music is horrendous.

[@Solidworksmaster]

yes, everyone has their own taste, i knew that , you're welcome friend!

[@davidweinert2861]

Du kannst das 50 Minuten Video in 10 Minuten zusammenschneiden

[@Solidworksmaster]

thanks for recommend friend!

[@YuraSushhev1984]

Зачем? Суть видео: показать как это делается. А не то что можно сделать из фанеры. What for? The essence of the video: show how it's done. Not something you can make out of plywood.

[@davidweinert2861]

@@YuraSushhev1984 I don't know what do you say me

[@YuraSushhev1984]

I'm talking about acceleration.

[@YuraSushhev1984]

Take your time...

[@francislake401]

Man, it sounds amazing! That's a high end speakers, anyone can easily be jealous. What amp are you driving it with ?

[@Solidworksmaster]

i used cheap amplifier TP3116A to drive them. thanks for compliment my friend!

[@isaacmadhavan]

Please put the information about the speakers and amplifier in the description. Also, it would be nice if you could tell where you got the design, so that others could go and get that for themselves. Thank you.

[@thehifiwifiguy]

It's hard to imagine this comment isn't from Solidworks master himself. LOL

[@avidgupta8813]

Very well done :) Don't give a f#CK to who is saying what, keep doing what you do mate. Good luck.

[@Solidworksmaster]

thanks mate! i know, we never satisfy all people's taste, i just try my best to sharing my experiments to DIYer community, thanks for watching!

[@edwardfitz-gibbon6484]

Argh. Uses cnc machine then screwdriver as chisel?

[@buival6993]

Лайк за попытку сделать что то интересное, а кто виноват в паршивом звуке теста ( запись, качество микрофона или качество самих колонок) не знаю, но звук как в железной бочке.

[@Solidworksmaster]

thanks for watching!

[@buival6993]

@@Solidworksmaster Пожалуйста делайте видео короче ( ускоренный просмотр, не повторять одну и ту же операцию и так далее ), а то смотреть очень трудно.

[@Solidworksmaster]

i knew, bc those video i made at 1st times ever, at this moment still not have much experiences to edited video. thanks for your comments!

[@buival6993]

@@Solidworksmaster Тогда успехов в освоении новых технологий.

[@lightdark00]

Now add a subwoofer! Make the back of the zoo's bird house tremble with the bass.

[@Solidworksmaster]

haha, thanks for your comments friend!

[@rubenacevedo2484]

No need to complicate things with a sub. More than enough bass for MUSIC. Beautiful speakers. Well done.

[@sub1ful]

Whats thd name of the sound?

[@Solidworksmaster]

the last song called "the poem of chinese drum", thanks for watching friend!

[@anthonybasile5035]

Don’t match different color screws on the side

[@scoobyrex247]

Tuned transmission

[@atomvirus949]

Which brand of speakers 🔊 and which power did you use in this sound project ?

[@Solidworksmaster]

i took a pair of bose driver for this speaker, and the amplifier is TPA3116D, you could check out on ebay for this TPA3116D, thanks for watching friend!

[@isaacmadhavan]

Where did you get the Bose drivers from? Did your friend damage his speakers? :)

[@jasoncollins4088]

Do you have the CAD files?

[@Solidworksmaster]

i only have *.Dwg, drive.google.com/open?id=1eWeonjf5irSKarXKnJAyOhDw3SJNdW4O i hope it work for you, thanks for watching friend!

[@jasoncollins4088]

Solidworks master did you design this in SolidWorks?

[@Solidworksmaster]

yeap

[@jasoncollins4088]

Let's connect on Facebook. facebook.com/dogmaster.tv

[@AnfarK1]

todo muy lindo pero podria haber elegido un tema como la gente para poder apreciar el sonido.

[@leonardoescobar7475]

Igual le falto algo de estetica, sellador y pintura creo yo

[@Solidworksmaster]

Hi friend! New project =>kzbin.info/www/bejne/inezfpVnbs6Lotk Hope you enjoyed my video, thanks for watching!

[@Solidworksmaster]

@alvaro martinez sorry , i've move video into new channel, some video not available here anymore =>kzbin.info/www/bejne/inezfpVnbs6Lotk

[@NaldoCuritiba]

it's mean like a good

[@Solidworksmaster]

thanks for compliment my friend!

[@MetaView7]

you could tape some streamer paper at the speaker opening and watch the speaker speak.

[@Solidworksmaster]

yeh, thanks for watching friend!

[@makingsense2268]

He buys a big CNC router, but can't buy a chisel?

[@Solidworksmaster]

lol, it's a DIY CNC, not buy, thanks for watching my friend!

[@tamsiuwing6546]

声音不對路，不過關，不好意思。

[@chipadams648]

You are suffocating you speakers, defeats having a a ported design.

[@Tank1]

Wow.. Amazing dynamics can you build me one or what parts you used.. Love the sound

[@Solidworksmaster]

i appreciate your comment my friend!

[@raduflorin6154]

the drivers are the 2.55 inch ,bose twiddler , full range drivers found in bose sound dock for example , rated at 30 watts !

[@bigpun4424]

I hate when they build those beautiful port design's and then plug it with polyfil doesn't that defeat the purpose

[@kristiankautto7616]

no

[@Professorvapes]

hmm lets try again hey

[@Solidworksmaster]

thanks for watching friend!

[@timbrindley451]

you need to reedit this video , no sound on the test

[@Solidworksmaster]

sorry, most of sound tracks was got copyright claim so i need muted it, thanks for watching!

[@Jdspitz2]

There is absolutely no reason why this video should be 30 minutes long. About 20 minutes of it is just wasted footage that should have been either sped up even faster or just plain edited out entirely.

[@Solidworksmaster]

thanks for watching friend!

[@MrV1NC3N7V3G4]

Agreed. 21:52 TO 26:29 is almost five minutes of silence alone, plus a lot of other repetitive stuff. Nice design and follow through though. I just wish you'd have picked 30 second clips of multiple music styles.

[@GRAAmusic]

nice lows... shame that the recording isnt that good.

[@Solidworksmaster]

thanks for your comment friend!

[@BetoLarski]

No crossovers?

[@Solidworksmaster]

pls watch untill end of part 1, you'll see i've installed crossover inside the box, thanks for watching my friend!

[@fedism]

So no sound after the 22:00 mark what a horrible test

[@Solidworksmaster]

i got a claim so need mute some soundtrack, pls watch it untill end of video and don't forgot plug in your headphone . thanks for watching!

[@fedism]

I figured, and Im really salty🧂 about that. Because those speakers look bada**.

[@samueljanis9665]

Please, what is it music ?

[@Solidworksmaster]

the last sound track is " the poem of chinese drum" , thanks for watching!

[@musicmagicsoul4266]

низ от скольки начинается?