awesome fork lift.wmv

[@woksel]

On building sites we use telehandlers can be used on any terrain and are able to vertically transport the materials. Okay they are allot larger, but can be transported. Nice to see that there are still companies who invent new solutions. Beautiful and solid finish of the machine by the way.

[@bishopcorva]

A very neat idea for being able to unload a truck or, if fitted with other grapples or buckets, in a remote location away from possible hazards. Such as if there is a toxic ammonia gas leak or radiological hazard in need of moving. Even simply being able to run two machines with one driver.

[@cerberorudy]

Sarebbe utile un video dove viene mostrato come si muove su sterrato,terreni accidentati e pendenze importanti sempre con un bancale di pellet o legna. Sono interessato al prodotto grazie

[@djdjerojr]

Construction sites have forklifts or machines that can be fitted with a forkmast on site.

[@dylangore1339]

I would have had that whole truck unloaded before the robot droped the first skid lol

[@makipsee]

this is great! will you be designing a model with an electric motor to power the hydraulics to allow use indoors?

[@cm7448]

A model with electric motors would be able to stow on the back of a trailer by inserting forks into pockets then folding mast down raising the machine off the ground. Can this model fold it's mast back with a load on (such as rolled up bounce house)?

[@MDBsrl]

An electric version is also available, but the PocketLift is supposed to be used mainly outside therefore the best selling model is the one with diesel engine. The PocketLift is transported in a box under the trailer platform, if compared to "Piggy Back Fork Lifts" this means: -better weight distribution, (the weight is in the centre of the trailer) -no burocracy to get the trailer street legal (overall dimensions wont change) -better truck handling (truck length wont increase) -trailer back door can be easily opened (no need to unload the fork lift to open it)

[@DMAXRYNO]

I've been looking for something similar to this. Remote control, but instead of a forklift, I need it to be a track loader like the walk behind bobcat MT55. Any plans to make something along those lines?

[@MDBsrl]

+BUKUINC We will develop soon a walkbehind track loader. It will be also remote controlled.

[@sebastiansequeira3915]

la verdad tendrias que promocionarlo en un ambito que se vea su utilidad ( terreno desigual como mencionas ) por que en este video veo un juguete a control remoto lentisimo. igual me encanta

[@matthiasgrosskopf9879]

Interessantes Gerät, aber eigentlich nur ein technisches Spielzeug ,da der Preis sicher sehr hoch ist??

[@MDBsrl]

Thank you for your answer, it is a professional machine also used by fire rescue brigades-

[@MDBsrl]

have you ever unloaded a truck in a building construction site? :-) thousands of concrete bricks...cement...equipment...tools...etc. No flat road but gravel on the ground. Isn't it a problem? hundreds of our customers find the PocketLift useful to solve these problems. Anyway thanks for watching our video

[@nathandean1687]

but u have to rember hazardous site like the japan failed reactors can use these as well.

[@nathandean1687]

wow a full month has gone by.

[@EcoinnovaAndina]

saludos , que tipo de energia utiliza , si es a baterias de que tipo son?

[@wcresponder]

What about automatic and preprogramed variations? future models?

[@PeterSkovgaard]

where can i see more information about this

[@cl10473]

Is there a US distributer? Also what's the weight?

[@MDBsrl]

the normal forklifts have wheels...they just cannot drive on gravel or uneven ground. The pocketLift can reach any location.

[@thomasrobinette3227]

ANY?

[@LiquidBlackWolf]

Hmm.. the Pallfinger crayler looks more steady and faster I gotta say. but yer. innovation and competition is way forward

[@MDBsrl]

+LiquidBlackWolf we are talking of different machines with different overall dimensions. Our compact forklift when transported under the truck platform will never hit the ground nor speed bumps.

[@MDBsrl]

The machine in the video was a prototype... please check the standard model: kzbin.info/www/bejne/oXSWpaivgqx8eM0 Thanks

[@1marceltony]

i would like to know what was in those bags on the pallet. How heavy a load was it ?

[@MDBsrl]

+moe roy Hi, the bags were 1600-1700 kg.

[@MDBsrl]

+moe roy Hi, the bags were 1600-1700 kg.

[@1marceltony]

"what" was in the bags?

[@roby6585]

Stupenda macchina!!!

[@HassanCruzFinanzas]

Cual es su costo US$?

[@trucker4trumpamerica172]

so nice robot doing it. but I prefer older. I am old school forklifts

[@djdjerojr]

But ofcourse I am glad to find you succesfully at selling your product

[@truebluekit]

Interesting concept, but shouldn't you show the unit off in its intended environment or applications? Yes, I understand that the machine is compact, can handle various terrain and is capable of lifting some heavy-looking loads, but by displaying it in the environment you chose, you are instead highlighting its weaknesses. I see that it is very slow compared to normal forklifts, has a fixed fork width, and faces the same problem as walk-behind units, in that they are slow, unless the operator is constantly running behind it. Yes, I know you put things in the descriptions, but isn't the purpose of vids is so that people can immediately see how good your offering is? But, I must say, it looks well built. Well done on that, at least.

[@이예권-z7x]

how much... I am korea

[@kwxj61b]

Nice for a toy but a person sitting on a forklift operate much faster than a remote joystick.

[@terryrack2534]

that's true plus be a lot less complex without all the remotes and cheaper. still full marks for innovation.

[@MiguelHernandez-rj2uz]

Nah not at all with a VR headset an a good remote 100%.

[@SAMPINJ]

Wait until the fork lift self operates it won't matter how slow I'll work 20 hours a day

[@MDBsrl]

The speed can be increased, according to safety and customer type of use.

[@MDBsrl]

The weight of PocketLift is 3300 and the lifting cap. is as well 3300 lb We are discussing with some importers for the US market but at this moment we have no commitments signed, so direct contact is welcome. Please send inquiries to [e-mail]

[@BrotherWitch]

This would be better unloading materials at new construction sites.

[@panzerwolf494]

Aside from the treads, I don't get what the point of this thing would be. Slow, light loads, just looks like a lot of excessive design to pose no real benefit

[@dubious6718]

+Panzer Wolf not everyone have a fork lift so with this the trucker can unload without having to wait for anyone

[@YoungoneYoung-lm4xe]

I could've unloaded that whole truck in the time it took that machine to unload 2 pallets.

[@MDBsrl]

The machine in the video was a prototype... please check the standard model: kzbin.info/www/bejne/oXSWpaivgqx8eM0 Thanks

[@ibrahimkehinde2602]

I LOVE IT

[@SolarizeYourLife]

Would be great in snowy areas, wheels just spin....

[@01Ghaynes]

way to make a truckie loose his mind as they dont have all day to be unloaded and others dont want to wait in line for this. maybe for chinese restaurant?

[@KevOXO]

+Geoff Haynes LOL yeah compare it with a simple 2 or 4 fork gas truck when the operator is near the end of his shift.

[@dubious6718]

+Geoff Haynes the truckie would have the fork truck with him.. if you had watched the whole video..

[@01Ghaynes]

I did that's why I don't like how much time is wasted

[@elcabezon5487]

Nice,but extremelly slow process,propane/electric forklift are better

[@MDBsrl]

The machine in the video was a prototype... please check the standard model: kzbin.info/www/bejne/oXSWpaivgqx8eM0 Thanks

[@emyrhopkins8726]

ajustable forks wd be good

[@tomshep5258]

i can see the potential

[@MDBsrl]

The machine in the video was a prototype... please check the standard model: kzbin.info/www/bejne/oXSWpaivgqx8eM0 Thanks

[@htgairloc]

Eine simple Kopie des Palfinger Crawler !!!

[@EezeeListen]

Commenting from the point of view on this video only, at the speed it was operating the poor delivery driver would not be on time for his next drop if he was on multi drops.

[@MDBsrl]

The machine in the video was a prototype... please check the standard model: kzbin.info/www/bejne/oXSWpaivgqx8eM0

[@MDBsrl]

Motor diesel 3 cyliders water cooled

[@djdjerojr]

A solution for a non-existing problem..

[@jason_willis]

seems pretty slow

[@jesseleo53]

this shit will take 8 hrs to unload lol

[@wadegatecliff3258]

So time consuming this would just piss truck drivers off and slow warehouses down

[@MDBsrl]

The Pocketlift is supposed to be used when no standard forklift is available. Truck drivers might leave it at home when the warehouse has its own unloading machines.

[@staceystory7175]

Cool

[@pablosuprano6560]

LOL.. so true.

[@MDBsrl]

It is possible, please send me an email at [e-mail] and I will give you all the details.

[@si8353]

why not use a forklift like this one it is much quicker- and is as stable as this one. kzbin.info/www/bejne/f4vHnoF9eNV6js0

[@AG-le3ee]

too too slow

[@snakecold6755]

+adrian griffiths too too fast, very fast. SHUT UP EMPLOYD GAY

[@vlxdvinhpham7615]

Hoàn hảo

[@MDBsrl]

Cảm ơn