AXCEL | The Best in Bowhunting Sight, DRIVER Just Got Better | Hunting Sights

[@mattgipe84]

Can’t wait to get my hands on one! Loved my Accutouch. This should be even better!

[@IZZYR23]

Wow this crazy can't wait to order one

[@trentsmith8497]

Can this be ordered with custom pins? I love my sword for my pin sizes. .29/.19/.10. But hate the weight. For whitetail strictly

[@theWoodrow82]

Yes you can order custom sized pins and color of fibers. I have personally done it.

[@vitalgroundoutdoors]

I have owned a few Landslydes! Tried the UV and was unimpressed went back to my landslyde and this Driver is on order which is an improvement over the landslyde. Question will old landslyde sight tapes work on the Driver sight?

[@michaelhogen9191]

Went from my HHA tetra to a UV thinking it was the best thing out there... I knew I shouldn't have listened to the "hype" and how they ripped off axcel. Might have to sell my slider and order one of these.

[@douglasvaughn9530]

​@@michaelhogen9191 how did UV rip off Axcel? If anything Axcel tried to rip UV off and that's why they had to change some of the features on this Driver sight. Notice how Axcel had to move the windage adjustment that was originally in the wheel to the inside of the sight. And the metal sight tapes were slotted and now three holes. UV had the windage inside the wheel first and slotted tapes. I still like Axcel better but you got this wrong.

[@BigBuckReaper]

Will there be a 3 pin vertical scope?

[@zebNwest]

Called them last week and they said no plans this year to come out with vert. 3 pin

[@Buck279]

Does the Axcel Driver come in a vertical pin option?

[@jonathan_guerrero]

Only the 2 ranger pin. But both pins are not adjustable.

[@Mattclay29]

Been Trying to decide on the Driver or the BridgelockUV………UV who?

[@Buck279]

@@Mattclay29 Mathews Bridge lock UV is a great sight. I was using the Boonie triple stack and got the sight with my new LIFT X33…. I absolutely love it.

[@vm859]

anything but uv. support usa made and usa labor and save money on top of it. uv slider is made abroad.

[@HBOutdoors_]

Might have to sell my UV Slider

[@bradenhardy4666]

Access to the windage knob only available on the shelf side of the riser is horrible, and will hamper people with larger hands to access the knob. I will stick to the landslyde.

[@mash4fun]

I'll have to try it before I throw it out for that. I see the potential issue, but how much do you move your windage? I shoot daily but I don't move my windage daily.

[@buckallison7279]

USA USA USA

[@A_Schmidt3]

I think the slider stop action should be reversed. I feel like pushing it towards the wheel to unlock might cause you to consistently hit it with your hand when changing the distances. If it's reversed it wouldn't even be a consideration

[@69bigchungus420]

Agreed

[@jesusisalive3227]

I dont see that being an issue.

[@poppasmurf15]

Agreed

[@dav2fish]

I wonder what a lefty model would look like. Completely flipped?

[@DB7.3]

i knew UV was gonna do some shit when they saw the driver..

[@Buck279]

Haven’t seen it…. What did they do?

[@brandonfourroux1552]

Th windage knob was similar to how UV’s windage knob is. Now it is on the opposite side of the site.

[@michaelbushey2787]

Uv is trash when you actually see how much you pay. Its quality, but they always make improvements to their stuff, so your paying 700 for last years sight and now this year they make it better, to make sure that they get people to buy a new sight everytime. No thanks. This sight looks really dope. I'm sure it's expensive, but axcel is tried and true. All uv is ,is all hype.

[@brandonfourroux1552]

@@michaelbushey2787 $450 with Avx-31 scope. And it has metal site tapes, unlike UV

[@Buck279]

I’m sure others have a different opinion and rightly so…. To each his own! Have a Blessed 2025.

[@tonyviers-de9qi]

No need for the 3 markers . You can only use one as slider .

[@trial153]

no place for a light?

[@the_sharp_carpenter]

You can put threaded lights directly into the mounting posts on Axcell sights.

[@co_golfer28]

This is legit just the Mathews UV Gen 2

[@Buck279]

I’ll have to agree……Mathew Bridge Lock UV more impressive. Don’t everyone HATE; this is just my opinion. But I will have some of those sight tapes. Only question is why do you have to pay extra for elevation gear protection?

[@TidoubleM]

Genuinely curious, what makes the UV better in your eyes? To me, this is better and that's before getting into pricing....

[@Buck279]

@@TidoubleMit’s obvious the windage knob is better on the outside out of the way and tucked into your main mover that’s why Axcel originally put it there but Mathews Bridgelock UV beat them to the punch and why would you ever want your sight housing to be able to rotate? Just another connection that can come loose and mess up everything on a hunt. Also you have to buy a separate cover to protect elevation gears…. Why not just put it on the sight to begin with?

[@co_golfer28]

I have the UV sight as I’m currently decked out with a Lift X 33 and for that reason, I think it’s better for me… There’s no doubt that the integration aspect of it with the Mathews line up is a great option. As far as overall, I think AXCEL nocked it out of the park. I’ve used the Accutouch for many years on my hunting bows and target bow. If I didn’t have the Lift X I would not have purchased the UV and I would’ve tried to get this instead… That said, if this release is anything like the landslyde release, people might not get their hands on one until 2026 🤦‍♂️

[@vm859]

@@co_golfer28 Driver, boonie, pruf, hha all made here in the usa with usa labor and are 200 cheaper than the UV slider made abroad. That just dont sit right with me. If it was the same price at around 500 it may be a pill I could swallow but at 700 gtfo.