AXIAL SCX10 III RC - STOP! WATCH BEFORE YOU BUY! - Unbiased Kit Review and Run

PLEASE WATCH THIS BEFORE YOU BUY!! Unbiased review of the instructions and kit!
Keith and Jesse back in the studio! Today we are looking at the new AXIAL SCX10-III Jeep Wrangler RC. We built it and took it for a rip, and here's what we think!! We go over the manual as well, and show you some discrepancies we've found. Be sure to remember this kit does NOT come with any electronics. Those will need to be purchased separately. Please like and Subscribe, to shelp support the channel! We hope you enjoy, and stay tuned for more great RC builds!
#axial #axialscx10iii #axialracing #axialadventure
#axialrc #axialscx10 #scx10iii #greenandblack
#scale #scalemodels #scaletruck #scale4x4
#scalebuildersguild #scalerc #scalerctruck
#scalerc4x4 #mods #upgrades #rcbuild
Thanks for stopping by!!
Music by Epidemic Sound (www.epidemicsou...)
Follow us:
Twitter: @NoobRc
Instagram: @pronoobrc
KZbin: / pronoobrc

[@GrimJerr]

After I got my Axe I thought I would be happy building out a few SCX24's, Then I watched a couple of videos of this SCX10iii and The Dark Blue one is calling my name.

[@ProNoobRC]

Such a nice rig!! Yes you need one!

[@reddsshaker3477]

Very informative. I just took delivery of my first SCX10 III kit, and I’m glad I watched this video before digging into the build!

[@MultiReadify]

This was really informative, thanks. I appreciate how honest your review is.

[@ProNoobRC]

Honesty is the best way! We are not fans of the reviews where they won’t touch on negative points at all. Then you buy it and find out the hard way lol. Cheers! Thanks for watching and welcome to Pronoobrc!

[@fbi4574]

Just bought it, i have some questions 1. What is the top speed of this truck? 2 is there any problems to use it on sand ? 3 how long does his battery last? 4 wen i am going to build it, do i follow the manual completly or do you have any tips to get a good result?

[@barceloni1984]

I'm digging the green and black. That was one of my schemes for my 10.3 build I'm planning. Great review.

[@boldrbangr9834]

Great review; really appreciate the detailed instruction manual corrections & tips.

[@ProNoobRC]

Thank you! Every day somebody new gets into the Hobby and this could really mess them up I know when I got into the hobby back in early 2000 the manuals were always being on any quality seemed a lot higher

[@OneWheelTwoSkis]

Wow! Errors in the manual.. and it gets it butt kicked by the TRX4. =/ Thanks for the info.

[@Island-RC]

Should have watched this before I built my kit today and yesterday. I knew some of the screws were off and not just loose in my head.

[@ProNoobRC]

Cheers! glad we could help sort that out for alot of folks still. enjoy! great rig you know have!

[@BUILTLIGHTWOUNDTIGHT]

I see most of the trx4 line of rigs as Scale Trail running rigs. Like 80% Scale Trail, and 20% rock crawler. I see the SCX10.2 as a 80% Rock Crawler and 20% Scale Trail. This is just my one option in millions! I like running a lightweight rig on the rocks. Take an 80 ton Army Tank and push it up a 70° incline! Now take a feather and push it up that same 70° incline. Now add 3S to the feather!!! Do you get where I am going with this?

[@ProNoobRC]

Oh yes!! We feel the exactly the same on that topic! Light weight and high voltage LOL. Best way to get things done!

[@CarminesRCTipsandTricks]

Nice overview. Exocaged RC just proved yesterday that 3 different 550 Motors fit. Also, the Chassis IS split like an Ascender - but it's NOT Ascender!!! Much more up suspension travel, like a VS4-10. Other than those, very good assessment!! Especially with the Manual errors. That was a good heads up!!

[@ProNoobRC]

Were any the Traxxas 550? That’s the only one I had laying around. Cheers buddy! Thanks for you compliments!

[@CarminesRCTipsandTricks]

No... But at least there's a $20 option that would fit, if you want to. 😉

[@alphamale1568]

Just FYI, you can remove the chrome from plastic parts with Super Clean in about 20 minutes. Automotive section of Walmart. Thanks for the review!

[@ProNoobRC]

Alpha Male is that the purple jug stuff?? I’ll have to use that process bleach worked well on the old chrome parts but the new parts it’s really bonded well. Thank you!

[@rcadventurer]

Great video soooo true!! I loved building the kit and customising the body really pleased with how it turned out. Great vid thanks👍👍👍💥

[@wiccanfpv]

Best review bar none so bra vo,if you ask me the level we are at they have failed in my book.Thats alot of mistakes in build manual which is the most important and i feel in my heart the 2 had less mistakes which turned out ground breaking.They were more copy cats and little design went into this model,they could have done way better,this feels like a very rushed rig to me.

[@ProNoobRC]

Agreed! It didn’t have that same “axial quality” and enjoyment to the kit as the 10.2. No extra stuff like guns and such they’ve always included in the kits. Just felt rushed to us. Great kit once ya figure it out but as an axial guy since they opened their doors I can say it don’t feel the same nope.

[@jerrodarndt4012]

Next one I buy! Shpoop! Good video guys!

[@ProNoobRC]

Lol!! Get one you’ll love it!

[@STP_RIDGELINE]

freakin SWEEEEEEET!! REVIEW mi big bro great detail and AWESOME pointers luv it!!! AWESOME VID MI FAMILIA!!!!! KEEP UP THE GOOD WORK!!!! 😀👍🇺🇸💯🙏

[@ProNoobRC]

Thanks brother!

[@STP_RIDGELINE]

ANYTIME MI BIG BRO!!! GOT UR SIX 4LIFE!!!! BE SAFE!!!! 😀👍💯🙏

[@sprather84]

Excellent review my rc brother and absolutely Amazing paint job looks epic

[@ProNoobRC]

Thanks brother!

[@ProNoobRC]

Subbed!

[@sprather84]

@@ProNoobRC yessir i appreciate your support

[@fernsolo]

Excellent video, excellent review 👍🏼

[@ProNoobRC]

Cheeers buddy!!

[@mickd8188]

Very good explanation of build process and walkthrough of the manual... Thanks for your efforts. There was no noticeable clicking under load at slow speed as many are complaining of, I'm guessing a competent careful build alleviates this..? Are you aware of this or have thoughts? Look forward to more from you guys on this truck. Cheers 👍

[@ProNoobRC]

Yes exactly that. Careful build and no over tightening of hardware and she’s fit as a fiddle. Thanks for the kind comments! Cheers! And yes stay tuned lots more to come!

[@kg5nja693]

The clicking under load is bc of the 2 gears on the shaft in the transmission are not installed properly. If you look close at the notches in the gear for the pin you will see one side is square and the other is round. when the gears are installed wrong it makes that noise. KZbin channel, Kisun's rc life shows the fix.

[@mickd8188]

@@kg5nja693 which was my point... they're the things I look for when building, careful precise assembly methods. I'm glad others will be aware of this when building their kits now. Cheers mate 👍

[@billderas3420]

@@kg5nja693 Yes, was aware of the clicking under load on my III; and, flipped both gears accordingly. However, absolutely no improvement in the level of the clicking sound was noted upon testing. Will test with shiming next.

[@davidshevchuk8885]

Now I'm stumped between the TRX-4 or the SCX10.2. I like the idea of the 10.2 since things will probably break over time meaning I will have to modify it, but the scale realism of the TRX-4 looks so fun too

[@ProNoobRC]

I would go to 10.2 route fir comp and trx4 for all around for sure

[@rcrelatedstuff6092]

Very good and informative review of this truck. Subbed for more!

[@ProNoobRC]

Cheers! Thank you!

[@mauriceprudhomme5296]

Great job!

[@ProNoobRC]

Cheers brother!

[@lstruggy]

Will our old aftermarkets steel bumpers from scx10.2 fit on the 3? And I wonder if the latest batches kits have been updated but Tnx for the heads up just ordered mine today can’t wait!

[@TheHobbyShop88]

Oven cleaner works to strip chrome too. I do that for model parts

[@ProNoobRC]

Oh yeah?? Nice! We just learnt from another Viewer that super clean works too

[@seavee2000]

Very informative and helpful-thanks. Subbed

[@ProNoobRC]

Welcome!! Cheers!

[@olirc]

Awesome tree design, and matches the paint colour perfectly. Very nice truck!

[@ProNoobRC]

Thank you! Cut it with my Cricut Air

[@bugman72]

@@ProNoobRC If you decide to offer that tree mask to others, let me know. Will be picking up a 10.3 soon and would love to have that on mine as well. Going with a Tamiya copper body color and black accents.

[@Socalnik66]

Thanks for the great and informative review of the 10-3. Got one of own now. Now I’m working on upgrading what ever I can. Can you tell me the specs on your wheel and tire set. Really like the scale look of the Goodyear’s on your rig.

[@ProNoobRC]

Hey boss! Tires are the rc4wd 1.9 Goodyear wranglers MTR 4.75 and the wheels are the vanquish 1.9 Method 101s with .350 hubs for a bit of poke but still tuck. Cheers!

[@Socalnik66]

@@ProNoobRC thank you so much

[@isaiahfurrow7414]

I really want one of these, I have SCX10 1.9 and 2.2, Bomber, SCX10 ii, and other RCs for bashing, racing, flying, etc... I really like what they did with this chassis and body... A bunch of other videos had a wierd noise from the drivetrain, kinda like a clicking... did you notice this with yours, couldn't hear the truck much in the driving section of your video...

[@isaiahfurrow7414]

About the 2spd, I am not looking for high speed basher type speed, or launches.... I am going to hope to gear for "enough" wheel speed, with a touch extra...lol. That would be for high gear..., and then hope that the "low range" gives just enough of a lower gear to help for real technical sections... Are you sure its a Vaterra Ascender frame, or does it just slide together and apart, like an Ascender, to be able to easily swap links for different wheelbase options? I'm thinking if the 2spd doesn't pan put, save the servo for a backup dig servo, or for build number two...lol Thanks for the video, and the good look at what you spotted in the manual as possible trouble spots...

[@ProNoobRC]

Grab one! You won’t regret it! We did Not have the click in ours that is plaguing many of the builds out there. We had seen a few of the sponsored guys builds on KZbin upon release and noticed that click so we were super Thorough when building our kit and didn’t over tighten any hardware and it seems to be the solution.

[@ProNoobRC]

That’s a great way to look at the 2 speed trans as technical and not for bashing! And yes I had some bad info from a sponsored KZbin the frame is not re used from vaterra it’s got a few holes that are different but same shape size and bends. Just drilled Differently to fit this truck so it’s a bit of a gray area if it is a reused part or if it’s an old part that is being used differently. Lol. Either way it’s the axial we’ve all been waiting for

[@Slatanicmushroom]

Nice review sir, thank you! I liked all the comments about the manual! At this moment I’m helping my son building his one. I used the screws for the motor mount to keep staying the nuts in place 😉 Subscribed!

[@ProNoobRC]

Good idea! And thank you!

[@SternLX]

Don't get me wrong, I do want one, BUT... The C-Hubs and inside portal case being molded to the end of axle tubes is my biggest concern. Snap one of those C-hubs and you'll be having to replace the whole axle. Maybe I'm too used to the TRX-4's axles.

[@ProNoobRC]

I was hoping for a different design too. The portal box being attached worried me on the Capra so We avoided it due to that. But I have many of friends in the hobby that have backed in buying them because the axle design.

[@hythesailor]

Looks like a nice rugged model!

[@ProNoobRC]

Yup axial and horizon always deliver a great product.

[@BC-rc]

Good review, alot of heads up on some issues. Will probably be my next build

[@LEGOBubuS]

Well covered! 👍

[@ProNoobRC]

Thank you!

[@jangsssrc]

The car is cool and thanks for the review!

[@lowbudgetrc352]

Great review and run video brother! Looks like those tires are a bit stiff. How'd it do following the Trx-4? Awesome channel you have! Keep up the great work! Liked and subscribed!!!

[@ProNoobRC]

Thanks brother! We are running the Trx4 vs scx10iii in 2 hours when my buddies off work. He’s running the blazer and I’ll be running stick Trx4 tires to even the odds. Yes the stock tires are ugly looking and too hard

[@zachhorton5940]

With the new body mounts could you add a Pro-line Jeep gladiator body to the car? Great detailed review!

[@ProNoobRC]

Sure can!

[@toolstechandtoys5910]

What thread pitch does the tap need to be?

[@ProNoobRC]

You’ll need an M3x0.5 tap. Cheers!

[@SnarkyRC]

Looks decent. Hopefully they come out with one that's not a Jeep body

[@ProNoobRC]

Agreed!

[@CarminesRCTipsandTricks]

They've had long term Licensing with Jeep, so don't hold your breath! 😜 Yes there's the occasional Ford and Chevy... But they charge SO much more for them, due to. Single Vehicle licensing.

[@SnarkyRC]

Yeah I know. I've had all of their Jeep's on their SCX10 and SCX10 II chassis lol. Maybe Proline will put out an 80s or 90s Nissan body in the future

[@CarminesRCTipsandTricks]

@@SnarkyRC ... Maybe the old "Hardbody" a Patrol, Titan.... Or SOMETHING that's not a Jerp!!!

[@GhostRider-ii7tz]

Rcwd makes a mounting plate for a winch for the trx4

[@ProNoobRC]

Nice!! I’ll have to order one!

[@GhostRider-ii7tz]

ProNoobRC.should be able to get one from amain.goes right in front of the servo.i used the rcwd 9.5 warren winch.

[@93SA10]

Awesome review! Thankyou so much! Just subscribed to your channel. I'm buying the kit version of this today. Or should I get a TRX4. Crap!!!

[@ProNoobRC]

Hard choice! Both great rigs but the Trx4 wins most comparison videos off stock Suggested set up from the manual in crawling. But the axial looks better. More scale diffs more scale body. Interior too so yes hard choice! If you want more looks axial if you want better crawling go with Trx4. Make sure you get Trx4 with 2 speed and locking diffs if you go that way as the sport isn’t as capable with always locked diffs. Sometimes it’s really nice to be able to unlock that rear axle so it doesn’t try to dig a Tire underneath and flip you over

[@adam_-adam]

do you know if you can use a engine sound box on this jeep? i had the scx 2 and took my sound box out of that and tried to put it in my new scx10 3 jeep and it doesnt seem to have a spot on the reciever for it to work, this sure does take away 50% of the fun, dont understand why this company wouldnt havr thought about this, its crazy.

[@ProNoobRC]

Yes rather odd move to not include an open channel for that. The scx24 even has an open port for channel 2 that you can add a sound unit too

[@ryanjayes3719]

Imma do that to the rims they look freakin sick that way

[@ProNoobRC]

Cheers!! Use a lot of patience! Lol

[@ryanjayes3719]

5-7 days in bleach ?

[@ProNoobRC]

If chrome yes. Most axial are painted silver that alcohol and a rag will take off

[@ryanjayes3719]

@@ProNoobRC I got the 10.3 kit lol I’m pretty sure it’s chrome

[@JerseyStyle7]

Mine should be done nxt wk 👍

[@ProNoobRC]

Nice!! You’ll love it! Best one so far!

[@ruslyrc2415]

greetings new friends, have a nice day ... 😍😍😍😍😍😁😁😁🤜🤛

[@ProNoobRC]

Greetings! Welcome!

[@MrsRabbit8]

Thank you for the review, very well explained. In another scx10iii review, the 2 speed seemed to be just fine, didn't seem to be as close in speed.. Maybe the motor they had could top-out faster? I definitely would want a clear distinction between the two gears.

[@ProNoobRC]

First off thank you! Yes maybe it’s the motor choice but I also agree a clear distinction between gears like the Trx4 has. You know it’s in high gear. I jumped the truck at the end of video and that was topped out. A Trx4 would’ve got 3 feet of air in high gear lol.

[@mauriceprudhomme5296]

I seen the Exocaged review the 2 speeds were very close as well. Hard to tell even what gear you were in even. Maybe an updated gear set to follow?

[@MrsRabbit8]

Guess it doesn't matter for me, I just inherited an scx10ii, so I'll be upgrading and modding it to the max. But again thank you, my buddy is planning on buying an scx10iii and we will want to find out about the transmission issue first. Also, I'm curious as to whether or not it is similar to the previous 2 speed. How modifiable is this 2 speed? What gears can be changed?

[@MrsRabbit8]

Ive been messing with gears and transmissions lately and really like it. I'll be watching to see developments.

[@BUILTLIGHTWOUNDTIGHT]

I wonder how long before horizon hobby discontinues the Deuce. I noticed the Jeep 2000 xj kit has been discontinued, and I am thinking the red Rubicon rtr has also been discontinued.

[@ProNoobRC]

It won’t be long I think. I think the 10.3 is horizons new flagship crawler that they wanted to get to us so they can do exactly that. There’s a non portal version coming soon and after building this kit I can say it feels like a horizon product and no longer an axial product. Just the name carried over. But it’s a great unit with 90% new parts over avails scx10... once you figure out all the mistakes in the manual that is. Another thing is watch the gears in trans. Round notch goes to pin

[@krashkingrc9715]

Awesome video excellent build looks great definitely didn’t like the portal axles but they have grown on me.

[@ProNoobRC]

We prefer wheeling straight axle too

[@TheOffRoadDiver]

Haha that jump

[@spiketwo666]

may i know how long is hte panhard rod?

[@nlrcchannel3967]

Nice video

[@ProNoobRC]

Cheers! Thank you!

[@mikejurnak4253]

Bro, I like the way you explain stuff new sub here 🤘🏻🤜🏻🤛🏻

[@ProNoobRC]

Thanks bro! Appreciate the love!

[@regularguyrcreview8686]

Are those the stock tires? I'm debating getting the rtr version of this. Looks like tons of fun!

[@ProNoobRC]

Yes stock tires! Fantastic setup for the RTR outa the box you can’t go wrong! Cheers and enjoy! Stay tuned we have a few we are upgrading

[@rcmikeklein5512]

really informative for anyone building this kit, did you get any clicking sounds from the trans?

[@ProNoobRC]

Yes I had one gear with square side to round pin.. pulled it all apart and flipped it over lol. Also had a rear portal gear chip on me first run but I cleaned that out. I switched out the tires to a 4.19 and it handles so much better. The tall tires aren’t needed with the portals. Check out today’s vid on the small tires

[@rcmikeklein5512]

@@ProNoobRC thanks for the insight, I will be building my truck soon, just ordered the new low range gears designed for straight axles and will run them with portals to get that low low 1st gear Matt from scale builders guild did that mod already, I will check out your 4.19 tires next.

[@ProNoobRC]

I seen Matt’s vid on that! That’s like the full size Marlin crawler gear boxes! We are gonna build a second one more comp based with that mod in it. Cheers!

[@aarontorok6389]

Nice video, did you have issues with the diffs? Mine are built correctly but they skip under load. Tried shims and everything I can think about.

[@ProNoobRC]

No actually didn’t notice any skipping but really don’t drive it much. We are still loving the 10.2s too much and waiting on some upgrades to hit the market and so a rebuild on it. Check you pinion bearings make sure they are correct size I know there’s some in the kit that are close in size but I am only taking a shot in the dark at it. Cheers mate! Please update if you find anything broken

[@maccam26]

Is the dig designed for the freewheel position?? Or are you just winging it in a middle position? Lol😊

[@ProNoobRC]

No not designed but there’s just enough space to pull it off.

[@penny713]

Hellooo I am new to the hobby rc world and I do want a jeep build but i’m not really sure what’s good between the scx ii or iii. this would be my very first build and my budget is about $1,100 max and so if you could help i would appreciate it! tysm

[@ProNoobRC]

For your first I’d go with the 10.2 as it’s a solid rig. If you can get a kit and build it so you fully understand it and the kits have better parts in the kits.

[@jaredbornhorst2068]

Please help ** My build has a unreasonable amount of backlash between the axles to the driveshafts. Stock drivetrain except front ring and pinion overdrive gears. I had problems in the discrepancies of the manual as well... As well as a few not mentioned, but could be due to bolting aftermarket to oem parts. **I had to shave down the steering servo mount to get the clearance for the horn to turn left and swing under the chassis brace and frame. (Spektrum S6230) The front shock mounts to the being off really turned out to be a evenings time of work to figure out what was wrong.. Plus I used aftermarket mounts that made it even more confusing..

[@joshghanem3472]

What’s the red Jeep you have in your intro? I am just getting in to RCs and am kind of thinking to do a scale model of my real life rubicon.. thanks!!

[@ProNoobRC]

That’s a custom build based off a New Bright JK toy. I’ll do a video on it soon for you.

[@joshghanem3472]

ProNoobRC awesome! Thanks

[@nicktravelstead515]

So I’m better off grabbing the scx10 2 ?

[@ProNoobRC]

Honestly I still prefer my 10.2s better yup

[@marccyberwiz]

Tekin RS pro interesting thought I was the only one that put that in some crawler. LOL

[@ProNoobRC]

Tekin on castle only lol. I am guilty of using the stock Traxxas one in the Trx4 rigs they work great

[@jspeedrc]

Nice crawling 🇨🇵

[@joaofigueiredo3597]

Hi, can you share the reference of that green color? Thank you

[@ProNoobRC]

Tamiya British racing green with a matt clear coat on top

[@joaofigueiredo3597]

@@ProNoobRC thanks. Looks really cool.

[@ProNoobRC]

Thanks! Such a nice colour!

[@kandscustoms1122]

Thanks for this one saved me from a bottle of ALEEVE.......!!!.......Ahhhh no headache’s

[@ProNoobRC]

Cheers!!

[@epicstrengthinsanity1235]

Hello Sir, do you think that car can fit 40mm diameter brushless motor? I know it’s only 36mm. Thank you

[@ProNoobRC]

Yes it fits fat cans like the hobby wing axe and such

[@epicstrengthinsanity1235]

@@ProNoobRC thank you :)

[@slimfire74]

Hey very nice and helpful video ! One question I love your diff covers ..!! What are they by? What brand? Material? Where to buy? I searched the web but did not find anything so great looking !! Thanks for your feedback !

[@ProNoobRC]

They are stock axial for the kit. Painted black and detailed other liquid chrome pen from Amazon

[@slimfire74]

@@ProNoobRC I guessed they were stock painted , I did hope I could buy them cos I am not good at detailing and painting... thanks , the entire rig just looks great 👍🏼! Thanks

[@erichiles9568]

Mine came with two differant gear ratios

[@ProNoobRC]

Eric Hiles really!?! Mine came with an extra panhard frame mount lol. They must be off on their counts lol. My buddy’s came with 2 LR shock towers and another no links no shocks. We are lucky lol.

[@kokilimonke]

@@ProNoobRC the extra panhard mount is for the std axle conversion. So is the extra gear. Since you need different gear ratio when removing the portals.

[@unlimited8763]

How do you make the paint matte?

[@ProNoobRC]

Tamiya PS55 flat clear coat on outside.

[@northwestmountainbikeaddic6874]

What color green did you paint your body with?

[@ProNoobRC]

Tamiya racing green backed in black and matte clear and matte black on outside. Cheers!

[@northwoodslife5964]

Great info! Thank you. I'll be buying a couple of these kits, one for me, and one for my adult son. We won't be using the Jeep JL body. My son owns a full size JKU and I'll be putting an old 1990's Cherokee body on mine. Did I understand you correctly that the chassis is adjustable in length? I'm not concerned with control arm length, but chassis length adjustability. We can always extend or shorten the chassis in the shop but knowing if it's adjustable would be nice. Thanks again for a great vid.

[@ProNoobRC]

Yes sir it’s adjustable! 4 piece frame and can be changed with a few screws. Really cool design. Those will be great looking h builds! Cheers brother!

[@D1RTYF0RSYTH]

why are there CDs on the shelves behind you?

[@ProNoobRC]

So the rack doesn’t leave hard lines on the foams on trucks. Iam gonna add some clear plastic soon.

[@johnhammond6225]

Just a heads up to others. Do not order your kit through Amain. They are months behind on pre-orders. Ordered early march and still nothing.

[@ProNoobRC]

Thanks for the heads up! Eliminator Rc in Manitoba has them on there store in stock and will ship

[@kylebeaulieu9484]

did the body come painted or did you paint it

[@ProNoobRC]

We painted it in house yes. British racing green with matte finish

[@kylebeaulieu9484]

@@ProNoobRC thanks, it looks great

[@kylebeaulieu9484]

@@ProNoobRC are the little trees on the sides of the body, stickers or are they painted?

[@rvlyssup]

Sounds like the manual is a huge mess...

[@ProNoobRC]

Yes for somebody new to the hobby this could really be an issue. I’d hope they revise it going forward.

[@malky525]

Like his right arm! I'd stab them with a spoon for doing that!

[@PhiddyPford]

I’ve found this manual one of the best. But then again I can read, and the illustrations are accurate

[@Foundation491]

Small mistakes are still errors had this trouble with the Capra they def are crap manuals 😂😂

[@ProNoobRC]

I was like... so did they try and build one before it went out!?! Lol. Obviously not! Lol.

[@Foundation491]

ProNoobRC yeah it was shocking there fox was to tell people to download the revised version from there website which considering they have now done it to the scx10 3 is just lazy 🤦‍♂️

[@Rich_Trujillo]

@@ProNoobRC Actually we built multiples by multiple people. Unfortunately many of these typos got through after the were supposed to be changed. I'm not sure how but it happened. My bad...but please note, we do build them and have others. Could be we are so close to it, you miss some. We've updated the manual and posted it to the Axial racing website and I"ll finish watching your vid to see if there were any others we missed from your notes.

[@YOOPDLRC]

👍😊👍

[@mccruze1105]

Iam from India and where can I buy it?

[@ProNoobRC]

Eliminatorrc.com

[@erichiles9568]

Put correct gears in it

[@ProNoobRC]

We did yup. No gears left over and only way to assemble it. Just not much of an increase in range between the 2

[@tbocfoRC]

Losi "low-see"

[@ProNoobRC]

Still working on that lol. Low-see. I’ll get it!

[@Skurwensyn_z_Rivii]

Will see

[@johnbasterson7938]

550 brushed motors fit.

[@ProNoobRC]

We only had a Traxxas for measuring up and it appeared to be 5mm too long. What brand are you running? I’d like to ditch the brushless it doesn’t have a great feel to what I am use to.

[@ljbenziger]

@@ProNoobRC Holmes hobbies 550 motors fit

[@EricsRC]

Still worth it today?

[@ProNoobRC]

Nope! Many many better options heck anything else is better lol. If ya got one straight axle it and 90mm shocks it’s bad ass. But outa box no

[@EricsRC]

@@ProNoobRC Thanks and great answer. What would you pick for a 2nd rig to my Trx4 K10?

[@worklessridemore76]

@@ProNoobRC Okay… so the portals are the main problem? Is it a reliable truck? Thx

[@Rob-tl9md]

axial needs to have tekno write their manuals.

[@rcjoe406]

Traxxas is like Gibson they'll sue anyone lol

[@ProNoobRC]

Yup! They’ve proved that lol!

[@CoBobo100]

Fuck me I wish I would have done a little bit more digging before I bought it oh well re sell eventually right 😅

[@ProNoobRC]

Still a great product but for us experienced guys it missed the mark for sure. Our UMG10 can out crawl it with out portals lol. It may get harvested to put the portals on the UMG 10

[@carlandrews3475]

I love mine nothing wrong with it whatsoever

[@ProNoobRC]

Never said anything was bad about it just helping with some mistakes on assembly in manual and our thoughts. We have 3 now and enjoy them. And the look can’t be beat.

[@jandrotorres2646]

Who did your body

[@ProNoobRC]

We did

[@ProNoobRC]

Tamiya racing green backed in black and tree line Graphics cut on our Explore Air 2 from Cricut. Then out outside it was sprayed with Matte clear and Matte black I then re-sprayed all the black plastics matte black again just to knock the shine off of them. I applied the Stickers and then brushed flat clear over top of them to again knock off the shine

[@stevewest7260]

That's exactly why I will never buy Traxxas. Going on 40 years now, I'm 60. Traxxas and there non stop control game on the hobby. Well there starting to lose it now. I'm glad I lived long enough to see it. F-U Traxxas.

[@ProNoobRC]

Bahahah! Yup!

[@thomasgross8289]

Holy crap! Im not a build it kinda guy more than capable just dont enjoy it. I would be losing my shit over that manual!

[@ProNoobRC]

Right?! Lol

[@3dmints286]

failure on axial. smh

[@ProNoobRC]

It feels to much like a vaterra.

[@yacsf]

Too much plastics

[@ProNoobRC]

Yup lol! I love billet

[@lorenzklossner6003]

To long video and tooo much words without informations... thx

[@ProNoobRC]

Cheers!

[@ConditionZero76]

not ( Lâsi ) it's ( Lōsi ) 😉

[@ProNoobRC]

Lol okay. You win.

[@jaysonkendallr.c.9900]

Check out the trail I am building on my channel!

[@ProNoobRC]

Gotta link??

[@garnetnelson1419]

Too bad only you know where you got it. Smfh

[@softrc6749]

Hi mate Can you send me a rc car to me?? Sorry to ask but I don’t have any money to buy one 😔 I am inside house with a big depression and that can help me to go a little outside because I love rc cars 😊😔

[@ProNoobRC]

We Will doing a give away at 2000 subs. Stay tuned and watch out for it.

[@anarchybastard6685]

What is that dirt bike in the back

[@ProNoobRC]

Duratrax dtx 450. We also have the metal mulisha atomic 540. Both for sale

[@anarchybastard6685]

@@ProNoobRC not sure if you've thought about reviewing them but it would be much appreciated 👍

[@ProNoobRC]

Can do!