Awesome truck! Would love to see it do some crawling!
@zenmaster5236 Жыл бұрын
Beautiful
@tjohanne4 ай бұрын
Looking beautiful 🎉
@bobaque703 жыл бұрын
Great looking rig
@krlaturn3 жыл бұрын
Thanks for watching and commenting!
@dirtyfingersninja3 жыл бұрын
Awesome rig, about to start something similar
@briangardner6653 жыл бұрын
Looks awesome!
@krlaturn3 жыл бұрын
Thank you! Much appreciated!
@omanrccrawlers88712 жыл бұрын
Looks amazing, great job
@jamiebarrette36303 жыл бұрын
Beautiful! Nice truck!
@krlaturn3 жыл бұрын
Thanks for the kind words!
@hikers0123 жыл бұрын
Do a run video man best looking sr5 in KZbin so far
@krlaturn3 жыл бұрын
You just made my day! And will do!
@shlomogoldstein33732 жыл бұрын
Love this truck. Is that the roof rack you can get on shapeways?
@krlaturn2 жыл бұрын
It’s the gearhead rack. It’s pricey but nice. www.ebay.com/itm/182021985680?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=5T4EPG-ASLe&sssrc=2349624&ssuid=LyIirh6SRmu&var=&widget_ver=artemis&media=COPY
@krlaturn2 жыл бұрын
You can get it without the lightbar for cheaper. www.ebay.com/itm/311597945742?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=5T4EPG-ASLe&sssrc=2349624&ssuid=LyIirh6SRmu&var=&widget_ver=artemis&media=COPY
@shlomogoldstein33732 жыл бұрын
@@krlaturn nice thank you!
@GyuHobbyRC3 жыл бұрын
The video is so cool. friend . Become a thriving channel. Let's get along. 친하게 지내요. 😉😉😉😉😉
@krlaturn3 жыл бұрын
I’m a long time subscriber of your channel friend!
@charankumar9073 Жыл бұрын
Nice job... What lights kit did u install?
@krlaturn Жыл бұрын
I used the Shapeways front grill and rear proline sr5 light buckets. I wired up my own leds 👍🏻
@angusparvis13 жыл бұрын
Nice one! Who is the driver over there?
@hikers0123 жыл бұрын
Very nice! What color code did you use?
@krlaturn3 жыл бұрын
Tamiya dark blue metallic
@krlaturn3 жыл бұрын
Thx for watching and kind words 👍🏻
@imammaris3 жыл бұрын
Front and back lamp looks so real, is any add on for front head lamp?
@krlaturn3 жыл бұрын
I used 3D printed parts from Shapeways. Please see link below. I used front grill, front lenses, rear lenses, and rear light buckets. www.shapeways.com/shops/rc_nerds?li=pb
@specter66333 жыл бұрын
She still looks good man. U have this for so long. How long the wrap lasted?
@krlaturn3 жыл бұрын
The wrap did ok. On hard hits it would tear and you could see the body underneath. But since it was patina it still looked good. I just used a heat gun to smooth out the tear. Thanks for watching and commenting friend!
@FJ-wj5dr2 жыл бұрын
Friend, throw a link where you can buy such front and rear lights. Thanks.
@krlaturn2 жыл бұрын
Shapeways. Here are four links. www.shapeways.com/product/2LLNDF7ND/rcn004-full-grill-for-pro-line-toyota-sr5?optionId=62161655&li=marketplace www.shapeways.com/product/QLPLU9YJ2/rcn003-front-light-lenses-for-pro-line-toyota-sr5?optionId=62160178&li=marketplace www.shapeways.com/product/CR9QFPGW3/rcn015-rear-light-buckets-for-pro-line-toyota-sr5?optionId=62203073&li=marketplace www.shapeways.com/product/7U2GLKMNB/rcn016-rear-lights-lenses-for-pro-line-toyota-sr5?optionId=62203062&li=marketplace
@krlaturn2 жыл бұрын
It takes work. You have to wet sand and paint the lenses
@FJ-wj5dr2 жыл бұрын
@@krlaturn Thank you
@richardveguilla42273 жыл бұрын
Where did u buy that body and the black one? I need them
@krlaturn3 жыл бұрын
The body is a proline sr5 body. www.ebay.com/itm/273988370600
@krlaturn3 жыл бұрын
The rear rollcage and bed are from the axial honcho. You would need to find that on ebay either used or from a parted out kit.
@emilgabl90693 жыл бұрын
Was that the pecan or hardbody? Nice build!
@krlaturn3 жыл бұрын
Proline sr5 lexan
@alecflores57743 жыл бұрын
Did you sell the og Baja Rey?
@montana40693 ай бұрын
What roll bar did you use?
@krlaturn3 ай бұрын
that is the axial honcho bed/rollbar integrated into the proline body
@krlaturn3 ай бұрын
@@montana4069 check out this video which explains how I did it kzbin.info/www/bejne/d2W7coCOi6dnqqsfeature=shared