Axle U Joint replacement / Jeep Wrangler JK ...Easy and hard

  Рет қаралды 24,557

Photomikes Garage

Photomikes Garage

Күн бұрын

Пікірлер: 24
@Boycie666
@Boycie666 23 күн бұрын
Excellent vid chap, exactly what I needed, no pointless chatter and super easy to follow. Wish me luck! 😁
@TheKelenn
@TheKelenn Жыл бұрын
About time I found a vid that shows what wrenching on a Midwest vehicle really looks like. Torches and hammers are a necessity.
@randyjorgensen8363
@randyjorgensen8363 Жыл бұрын
I agree, some if not all of the other videos make it look like things go pretty easily on this repair. But it is a fairly big job and things do get rusted, stuck or hard to reach, glad you showed that. And don’t forget everyone, clean off the rotor with brake cleaner before the wheel goes back on. Almost a guarantee that some greasy something will have gotten on it by now!
@Evil_XIII
@Evil_XIII Жыл бұрын
Mate… your video is perfect as it is, it represents the means, the majority of us have.
@seanmenektos5514
@seanmenektos5514 5 ай бұрын
M8 your video was produced and done perfectly. I'm looking forwards to the next project I have to do. You explained it and shown everything great thank you :)
@lorgar8939
@lorgar8939 Жыл бұрын
Again thanks for the video. Got my parts and the two tools I needed and got the job done. After getting it all apart I found my problem one of the caps was rusted inside and you could see the heat damage. This video had all the info I needed. Only strange things was I didn't have any spacers on either axle shaft.
@richardthomas762
@richardthomas762 Жыл бұрын
Great video shows that it's doable in the drive way with most common tools
@jasongray5060
@jasongray5060 5 ай бұрын
Great video, really appreciate the clear install view. Perfect!
@manuguardado91
@manuguardado91 Жыл бұрын
very helpful video. im going to need mine replaced very soon but i feel comfident i can do it my self with this video. thanka!
@andreistancescu1669
@andreistancescu1669 Жыл бұрын
Multumesc pentru video! Salutari din Brasov!!!
@James-zb1qk
@James-zb1qk 3 ай бұрын
Thanks for the video! I think I need to do this as well and this video is really going to help. Question though. I need to pick up a few things, which impact driver are you using? You seem to be happy with it.. thanks
@lorgar8939
@lorgar8939 Жыл бұрын
Thanks for the video had everything I needed. Just ordered new u joints for my 11 jku Rubicon. And some cheap tools. Now I'm wondering if I should do the axle seals while I have most of it in pieces. And then I wonder at what point do you stop at.
@Deconstruction_Zone
@Deconstruction_Zone Жыл бұрын
This is my next project. Getting some grinding from the axle u joint. Going to replace before they explode 😂
@geberhard
@geberhard Жыл бұрын
Good and very helpful video... but tapping the cap with a hammer is a major NO. You have a press tool, just use that instead :)
@Baileybear85
@Baileybear85 7 ай бұрын
Im having major issues with my ujoint job, I have a 2012 Jeep Wrangler sport JK. I go on any auto parts store website, put in my vin, and shown a selection of everything that SHOULD fit. I pickup some Spicer 5-153x joints with the intention of replacing both fronts as a day job. Fought with the damn joint for 4 hours with success, but the brand new joints are significantly smaller than the bore. This is a time sensitive issue and i really need this fixed by tonight. Any help/advice is more than appreciated.
@rulydai
@rulydai Жыл бұрын
Good video thx for sharing my brothaaaaaaa
@jamesschwamberger7958
@jamesschwamberger7958 Жыл бұрын
Thank you Thank you.
@elgastsos210
@elgastsos210 Жыл бұрын
Just curious did you have any steering looseness or play when driving or did you know the u joints were bad from noise only. Got a quick/short gap somewhere in one of the steering components. Just can't find it😮‍💨
@MichaelThomas-hg7vk
@MichaelThomas-hg7vk Жыл бұрын
Good video thanks
@JohnMoreno-i5v
@JohnMoreno-i5v Жыл бұрын
Did you have any brake vibration when braking???
@PhotomikesGarage
@PhotomikesGarage Жыл бұрын
No , just clicking on turns.
@FixingCrappyCars
@FixingCrappyCars 9 ай бұрын
Bro... you're loosening bolts with a torque wrench?!? 😮
@thatoneguy7938
@thatoneguy7938 7 ай бұрын
12 point.....what??
@insylem
@insylem 7 ай бұрын
The first step is to take off the wheel? What about lifting and supporting it first ;)
Jeep Wrangler - Front Axle U-Joints
48:00
South Main Auto LLC
Рет қаралды 221 М.
А я думаю что за звук такой знакомый? 😂😂😂
00:15
Денис Кукояка
Рет қаралды 6 МЛН
Как Я Брата ОБМАНУЛ (смешное видео, прикол, юмор, поржать)
00:59
How to Diagnose and Replace Universal Joints (ULTIMATE Guide)
22:06
How to Replace an Axle U Joint / Jeep Wrangler JK
14:45
Donny The Late Model Tech
Рет қаралды 99 М.
WHY YOUR JEEP LEAKS - And How To Stop It
5:15
Jeep Leak Fixed
Рет қаралды 7 М.
Jeep Dana 30/44 Ball Joint Replacement
19:31
OutJeeping
Рет қаралды 124 М.
Jeep JKU axle U-JOINT replacement! DIY.
29:33
JKU 392 ADVENTURES
Рет қаралды 11 М.
How to Undercoat a Jeep Wrangler Frame or Truck ***SMOOTH FINISH***
11:27
Spiro's Automotive
Рет қаралды 1 МЛН
Kreuzgelenk wechseln Jeep Wrangler | 4x4 Passion #93
23:13
4x4PASSION
Рет қаралды 32 М.
Don't Pay for Ball Joints Again, Jeep Adjustable Ball Joints
15:18
Replacing Jeep U-joints? Don't make this mistake!
5:41
Will Greenlee
Рет қаралды 17 М.
How to replace U joints with no special tools
13:48
sixtyfiveford
Рет қаралды 1 МЛН