B-SERIES Jackson Racing SUPERCHARGER INTERNAL Cooler!

[@riotgear9116]

As a ship engineer you set my brain on fire when you didn't see how much easier you could have made it on yourself to get that cooler straight across

[@alecfleming373]

This is SICK!!! Vintage speed parts are so unlike the new stuff! I love seeing this stuff! Watch, in under a decade, you'll be the one the world turns to for this stuff. Keep it up!

[@Skank_Hunt42]

Static needs to focus on projects like this. Fabricating custom work is so satisfying

[@marioguerrero7411]

Tip to tig welding aluminum adjust your frequency ,for thinner material use a higher frequency for thicker aluminum use lower frequency

[@MrReefurcheefur]

Check out how John at LHT does the 70mm port

[@dy2_str33t_king]

I got one of these for a D series and I cant wait to throw it on. Got a 91 Tahitian Green Si hatch that I'm swapping in a Z6 and throwing the JRSC on.....should be pretty fun. They are getting harder and harder to find.

[@jermainedow1481]

Glad to see you back static!! The people need you!

[@zen95209]

Glad to see you back in the garage. Good luck with your recovery!

[@williamfullman2639]

I literally stopped watching your channel so I could build up some content LOL now it's time to binge

[@EastBayLife510]

man, you have a million tools and parts, and you know where each one is exactly at. i had trouble looking for electrical tape in my garage.

[@YoungStatic]

Just general everyday tools!

[@fidelj3025]

Just gotta be careful about welding on that cast manifold, good chance that I will warp if it gets too hot and cause stress fracture. That cooler won't be enough to cool the hot air that roots blower puts out.

[@steveunderhill6570]

Single cut burrs are much better and resistant to clogging up when used on aluminium . Nice content as usual , nice to see you back at it 👍

[@hunterstump9748]

Dana so so so happy to see you back in the shop brother. Much love from North Carolina my man. Missed watching your videos bro. We need our static back. In all seriousness glad to see you’re okay an moving forward buddy. Progress is better than no progress!!!!!!

[@Sok_Crazy]

Great to have you back

[@TheJohnnyef9]

I know you said you do some of the work off camera but I think if not done it would be a good idea to run some water through the cooler before installing to make sure its not leaking. Great work and that is a pretty cool idea for the supercharger setup.

[@Brock_Landers]

Honestly Dana, I've never seen a B series JRSC in person, but I think it could be alot of fun with a smaller pulley providing more boost, a large diameter (whale penis) cold air intake, a large set of injectors, a Skunk2 70mm throttle body, a Walbro 255 LPH fuel pump, E85, and tuned on either Crome or Hondata. I'd LOVE to have that setup in a DA on a B18C1. I had a 92 Integra GS when I was 18 and I've missed it ever since...that was 20 years ago. Now I have a 709 whp EJ8 Civic coupe and a 502 whp CG1 3.2 swapped turbo Accord.

[@sloth1992]

I have one I plan on putting in my civic, I have had it chilling way too long also.

[@EZ-D-FIANT]

I wish you were in England we would get on so well and be so suited to work together! I've built MK1 crx with B20a7, liquid cooled throttle bodies made from the old big twins and so much compression it would lock up on de-acell, that was 20yrs ago but the same craziness still exists now and it's nice to see another true mad man lol..

[@juanmendez629]

Glad to see you back at it, missed those videos.

[@jgc0064]

Sick idea and execution! Are you going to circulate coolant thru it??

[@Needsoles]

Yes

[@GreasyFingerboys]

If you block off the slits and cut the outlet port continuing the triangle shape all the way to the edge of the square outlet, the charger will make significantly more noise and will pick up some performance.

[@PRESIDENTAVE]

Hi Dana, I have one of these, I would be very interested if you could work with this owner to do a whole series, the install and set up would make very interesting vids. Your awesome.

[@YoungStatic]

He lives about an hour and half from me . Because this was a previously recorded day, the kit has been installed / running in his car.

[@sneakuhatx9464]

Dope to have you back man.

[@Pandadancypant]

Excellent use of CAD cardboard aided design.

[@Zt3v3]

I had one of those on my B-swapped EF, it was a hoot but you could feel the power difference after a few pulls or in hot weather. It really needed some kind of cooler. How did this mod work out?

[@gilbertgarcia4288]

Im glad your back fam! Missed ya!

[@b20eg195]

Any updates on how this turned out from the person you made it for would like to know so i could chase this project as well.

[@tinyturbo317]

Yeee yeeee let's go.. YS!! Got my evo registered ready to work on it as well!!

[@LampuhkapsChannel]

LHT Performance has a service to do this and they have a custom snout for the stuff

[@Raindrops4891]

dude you remind me of my dads old homies from back in the day... RIP Ricky.

[@jeffday6551]

It seems like a supercharger would be a safer way to go as opposed to turbo, less stress on the engine itself, am i right or turbo is easier on the engine

[@T3KN0iD]

I need to see some test before and after. Inserting that cooler restricted air-flow. Why not just a better intercooler setup?

[@Needsoles]

Intercooler would not make a difference since it’s before the blower. It has to be after to blower to make a difference in cooling the compressed air

[@chefboiali]

Static never disappoints! Quick question.... I'm in the market for one of these after all of these years, and LHT has their version that doesn't have the fins on the cooling tubes. Do you believe that the cooling tube fins on the one you were asked to install would interfere with airflow?

[@adriangreen2554]

Dana videos always on point. You got mad skills champ. U need a shop opened and bring that big money 💰 in. 💯💯👍🏾👊🏾😁. You even keep the draggin wagons alive. I never see any wagons in the DC area besides car shows once n a while

[@Younis872341]

Great concept, hopefully it shows positive results when compared! I personally would be nervous of the fins on those cheap coolers failing off and reeking havoc..

[@Mattyyoung85]

Happy to see u back man ..

[@kaybevang536]

Not a supercharger guy but they are the most interesting builds on any car

[@jernarddavis7206]

Could you put that supercharger on a stock motor without doing internal work.

[@mcnorm4023]

whoooohooooooooo no lag

[@David-rk2cw]

Does this affect air flow at all?

[@redeyez415]

Yee!! Great work

[@joeaccetturo1213]

Bro I'm wondering if the cooler will be of any advantages with the turbulence of the charged air. May just cause more harm than help.

[@dee1089]

id be worried about it cracking due to vibration and lack of support on the inside. prolly wouldve been easier to just use flange to custom make a manifold. though wouldve costed more material. also hope motor doesnt lock up when it does happen. maybe go with laminova cores? idk again just depends on budget. for this budget.. nice.

[@dee1089]

try doing a twin charged build. its complicateed

[@benog48]

Have a b20v with Itr Head Was thinkin about supercharging it too with B series Supercharger for fun. Thinkin about a coolin system .. this has brought me some enlightment and ideas.. nice!! Keep it up!!.. that fab work..

[@Mattmazz77]

Did you test the cooler for leaks after you welded it?

[@DanTheMan454]

Wonder how having the cooler in there is going to effect flow!

[@DarksideLilWoady]

Hey brotha can you do an update on this video ? And your buddies experience??

[@emmanuelledesma8940]

Good video homie.. yo so what happen with your nephews wood project?

[@YoungStatic]

Both are done-ish. I will do an update video on it.

[@x559-2]

Just got a Jackson supercharger and going to put it on my b20b non vtec High Comp. Any tips on what I should look out for ??

[@The_Redkween]

That’s some awesome fab work. The only thing I’d be worried about would be springing a leak and having that water shoot into the cylinders. Cool it with Nitrous instead. 😂

[@mgyabes1985]

LOVE THE CONTENT. STATIC IS BACK....

[@209malo]

that cooler idea not bad i know on my D Series Jrsc gets hot . is he going to run a seperate water cooled system or attached to Rad

[@YoungStatic]

It’s own cooling system with a pump. Already tested it. 40 degrees cooler 👍🏼

[@209malo]

@@YoungStatic oh shit okay thats awesome cooler air more hp , longer drives

[@CHARGER08RT]

I wish they still had SC for the H series

[@jacksonbuilt5830]

Its good to see you back doing some custom stuff brother!

[@Brock_Landers]

Also, I would get a circulation pump, a one gallon tank, and plumb that tank into the cooler so you can plumb ice water through the cooler. I think that it would make that Roots style blower so much more efficient.

[@YoungStatic]

That’s somewhat the plan.

[@bmxbandito666]

You know anything about 1st gen TLs? With a C32a

[@dephtpbeats9200]

"I don't like that" lmfao That was dope to see bro. Love the Fab work.

[@JamezTechAuto]

Do they still sell those superchargers

[@adorno1010]

put some ac fittings on the end of that cooler an have it set up like the hellcats with super cooling

[@mike8818]

Most Hondas don't run ac....

[@adorno1010]

@@mike8818 yeah I know.....I have more then 15 years in the game ...those who know realise that with power adders you don't need to eliminate ac. in this example if this guy is running a supercharger and hasn't deleted his ac this would be a perfect opportunity for him to make a sick custom Intercooled setup

[@john-martin]

Bro where did you go for 3 months?

[@jermainedow1481]

He explained alot in his last couple videos.

[@deltakilo5797]

Ohhhhh noooo wayyyyy , Dis be fire af!! 🔥💯🔥💯

[@JR.WITH.THEHATCH]

Is there anyway I can talk to you what the best way to reach you? Your the best guy on KZbin for the Hondas , explaining everything and showing everything also no shortcuts I’ve been watching you for a long time and always come back to your videos/channel for reassurance or help

[@ajh8913]

Videos coming in boyzzzzz 🙂🙂

[@bryanhinson987]

Bro it don't matter what you do in the videos ill always watch them

[@anthonyrojas5908]

I got a Jackson racing supercharger but needs work , I’ve been looking for help

[@BBsAuto]

How well do you think this will work? How much cooler will the air be with it?

[@Needsoles]

Just tested it. Went from 190 degrees to 140. Didnt go higher than 145

[@BobMarley-yq3wi]

I wish I could find one of those hens teeth for sale. So rare to find

[@brewskywayne3716]

Chingon!!!!!🔥🔥🔥👍👍👍👍👍

[@btibbs626]

Skin is looking good bro and I see you loosing some weight! Keep drinking water!

[@nicky9door9999]

Is the car that going in a race car? Sfwd rules would call that 2 power adders

[@Op1zilla]

We enjoy any video, super chargers are 😎 cool, I don't see alot of them like u do turboz, have 1 of each, turbo car, na car , and a supercharged car, ggz Static

[@AlteredCarbons]

when i seen the supercharger spinning and then you popped into frame my brain farted and i thought you where making a cameo on a different youtuber's car hah. then ending was so bad ass! i should start reading titles hah.

[@renebarras394]

love your stuff , would love to have a hf CRX to work on

[@toddmcminn4722]

Was hoping to see you twin charge a honda (ie a Jackson supercharger and a turbo)

[@TURBOTRISTO]

Good job Dana!

[@oneeyewilliam]

I have a Jackson supercharger for a b16/typer r but have a 97 b18b. Is there a way I can still make it work dana ? Or does anyone have a b16 for sale ? I'm in WA .

[@Vkandypaint]

Just do a lsvtec and super charge it. I'm also from wa!

[@oneeyewilliam]

@@Vkandypaint I dont know where to begin . It seems hard to find any b series anymore.

[@Vkandypaint]

What did you need? Maybe I might have it or know someone that has what you need.

[@maikenpham1631]

@@oneeyewilliam how much you asking for it if you do sell. I’m also In wa

[@oneeyewilliam]

@@maikenpham1631 I'm sorry but not selling it . But if I do you will be the first to know.

[@desertadventures_]

we need some young static shirts!!!🔥🔥

[@jaroldtromp2235]

What's the reason behind the cooler inside the intake like that ? Can someone explaine / teach it to me ??

[@YoungStatic]

Lower iat. The air is going to blow directly through the cooler, which is going to be attached to a standalone radiator, which cold fluids are going be running through the cooler itself, would blow cold air into the combustion cylinder.

[@JunkyardPerformance]

Good video every time I need to go weld something

[@funkworthrollin4959]

Ese. That's what up. Static.

[@MadGameMarine]

That’s a pretty sick thing to do, but I’d have too much worst case scenarios pop up in my head running that setup. Especially with those flimsy fins, I’d always have the thought of those weak flimsy fins getting force fed into the motor via compressed air from the charger and cause internal damage would be a catastrophic loss in my mind. Let alone roll a dice and get a defected cooler leaking liquid into the Motor as well. Your welding is always on point. Yessir keep up the good work chief, aloha 🤙🏽

[@robertverduzco2406]

Don't be a weenie.you got to man up build it big and run it hard!!!!!

[@MadGameMarine]

@@robertverduzco2406 ayeee true that. We only live once right, might as well go hard or go home hahaha 🤣 🤙🏽

[@escondidonative2903]

It would kill me to cut that sc but it came out sick. Cool vid!

[@jessegonzalez6258]

Bro nice work ive been following for a minute now im trying to get my crx going too

[@oldskool1979]

Vids coming liek crazy... yess sir !

[@ikaro1120]

AWSOME job! Keep it up Bro!!

[@johnplate9367]

Hot streak!!!!!! Love the content

[@chensueher1393]

Love the work bro, keep grinding

[@edwinorozco3732]

Can we get a dyno video for this later on 🤔

[@funkworthrollin4959]

Bro. I'm drunk. Just walked in to some crazy Lazer shit crazyness.

[@calimilk1113]

Damn homie !!! You got skills!!!!!

[@jeffgood6441]

That's sick bro but you should of just got a m45 or m62 and did a homade remote setup

[@Needsoles]

It’s an m62

[@jeffgood6441]

@@Needsoles yep il just letting you know cause that's how I did mine and when I was done I realized it was basically the same as a Jackson setup for a quater of the price with a better generation blower but too but props man

[@msand951]

👍 sup, hell ya bored at work and your video popped up.

[@zakibird]

Great video Dana

[@gilbertolopez5906]

I'd like to see one of these Superchargers on one of your future builds👍👍

[@upfactoryracing4148]

Looks good man he could have run an air to water cooler before the throttle body but this will be better than nothing.👍

[@Needsoles]

Wouldn’t work

[@upfactoryracing4148]

@@Needsoles I got you. I was thinking like fan type supercharger with the after cooler but you would have air restriction on the roots type supercharger. So having a cold air intake setup and your new air cooler in the plenum should really keep the temps down. Well you got a one off intake. Let us know how she does👍

[@bulbacivic]

Dude that was awesome

[@davidmcginn8026]

👍👍👍👍👍👍👍👍

[@renebarras394]

how your ankle ???

[@SoulPurposeGarage]

Such a sweet idea man, Great work! Just curious.. Do you think condensation will build up inside? Possibly causing water in the cylinders? Please keep us updated. I would love to try this! Ps. Dont forget to test for leaks 🤙

[@Balakay9435]

Hell Yeah Brother

[@cjaeger6584]

Straight 🔥🎉