B16A BILLVTEC 11,000 RPM VTEC 240 HP ALL MOTOR DYNO

[@kevins6277]

That motor sounds like it has a lot more rpms in it. Sweet! :D

[@TrentBrenneman]

It's over 9000!

[@Elvis_not_Presley2]

Beautiful. The sounds that engine made were heaven. I miss my B16. Great vid. Thanks.

[@bonamin]

You're doing a great job Bill !

[@billvtecRPM]

bonamin Honda thanks sir !

[@jasoncarter8647]

+billvtecRPM what kind of trans is that?

[@Mile-long-list]

+Jason Carter probably a quaife

[@Seattle808]

this thing just kept revving and revving! Out of control sick!!!!!!!!

[@user-jt6nw6wm5q]

that limiter sounds goooood

[@donavenable]

Very nicely built, sounds amazing...!! I did know a Vtec can sound like that, great job guys..!!

[@walterpena5678]

This litle 1.6 has more power than my 1991 Ford Mustang 5.0 GT, kind of embarrassing.

[@mitsu991]

this is not A 2.6 this is A 2.2

[@walterpena5678]

@@mitsu991 1.6 not 2.6 or 2.2 still has more power than some v8s

[@hobonatilife9357]

L4 pistons vs v8 🔥

[@alextint5987]

2:45 And some dudes say that the Corolla 2zz sounds better than every Honda engine

[@bryan10444]

it does sound better than any Honda engine lol

[@vebzuia4336]

@@bryan10444 2zz sound nice, I mean their lift technology is technically VTEC 😂 B20v and K24a2 sound so fucking mean when their built. I like the sounds they make, their just more known and better tbh.

[@Creeperboy099]

Imagine in Initial D if the EK9 that had raced against Takumi’s AE86 had this engine

[@jacobu37]

Would of been a perfect match.

[@djcruccotechniciangaming887]

Into the Takumi's 86 has the 4ag 20v na, 20 valve in this engine, is more powered b16a2 na with mod for 11k RPM, 240hp vs 320hp, but VTEC is solo VTEC, my next car is a lovable Honda Civic EG6 with Mugen mod and this b16a2 modded in na, without turbo, to burn the Fiat Abarth 595 ss with a $hit T-Jet engine 1.4l with tr3046 turbo swapped, 350hp to blow up this engine, FF na vs FF turbo, B16A2 modded 11k RPM na vs T-Jet turbo 8k RPM powered swapped , me are more powered with my EG6, my illegal uphill is in my mountain, at uphill street of Varano, in Italy, the best car in this street is Lancia Delta integrale hf turbo, but i kick off the fking $hit Fiat Abarth 595 ss.

[@djcruccotechniciangaming887]

lovable sound of b16a2 11k RPM vs stuutuutuututututututututu sound of the turbo without pop-off.

[@matthewscarpetta]

sounds like it's going to explode but it won't! revs to the moon like a moto gp!

[@billvtecRPM]

i have built this engine because of restrictions the championship required engine before 1994 year. the championship owns 3 category : + 1000cm3 of - 1600cm3 and + 1600cm3 to 2000cm3 and + 2000cm3 the owner chose keep b16 (1600cc) for running in the first class. because else competitor in 2.l class or more , runs with engine bmw 2.l M12/7 or ford cosworth BDG (280hp - 300hp ) the b16 engine can not compete with this big 2.l .

[@amelielepennec1314]

+billvtecRPM bonjour, escuse moi tu est francais qu'est-ce que tu veut dire par big 2 l ? sinon tu dit 240 sur les roues donc 280 cv au vilo tu pense ou tu est sure( si j'ai bien compris) qu'on peut aller chercher 300 cv sur un b16 ?

[@billvtecRPM]

+Amélie Le Pennec bonjour. oui je suis francais. le moteur de la barquette (un honda b16 ) en 1600cm3 cette barquette court dans le championnat sport proto cup. le reglement impose des protos et des moteur ayant été produit avant 1994. (le b16 en fait partie ) le championnat est divisé en plusieurs classes de cylindrée. la cylindrée de ce b16 n'a pas été augmenté pour rester en catégorie inferieur ou égale a 1600cc car il ne peut pas rivaliser avec les moteurs 2.litres du championnat tel que le bmw M12/7 ou le cosworth BDG qui développe entre 270cv et 300cv. ce b16 fait 240cv au moteur et non aux roues . ce qui fait deja 150cv au litre.

[@amelielepennec1314]

+billvtecRPM sont rapport volumétrique est de 11.8 j'ai vu sur une vidéo un RV de 15.2 sur un b16 c'est possible avec 80cc en plus ?

[@flavortown3781]

sorry I dont speak french but what did transmission is that and how did you modify the oiling? is it dry sump what kind of pump is it?

[@MetallixX974]

He was talking about the compression ratio. He wanted to know if a compression ratio of 15.2 to 1 is possible with only 80cc more.

[@lickymywicky6289]

that lil 1.6 is giving that dyno a work out.

[@chrissmith3073]

Need this in the crx!!! I love my b16a but I needs them revs!

[@0222tomi]

Can the build details be disclosed now? Cheers

[@chiefslief1886]

This is therapy for me..beautiful 🎶🎶👍thanks

[@TheFlacker99]

I'm curious; I see you're running a plenum intake, wouldn't you gain more if you use an individual throttle body system?

[@shaolinlueb]

that sound. i love it so much.

[@reez-fr8kp]

Is this run with stroker kits? What piston size n what cams..?

[@Highway94]

What kind of transmission did you guys use?

[@chiefslief1886]

Hi there, any videos of this beautiful car on board somewhere please?... Hillclimb maybe?

[@billvtecRPM]

Hi Yes sir I have a movies in board I will upload them soon.

[@Antmattroman]

@@billvtecRPM nice!

[@hondateg5497]

ITS REVS GO INTO THE HEAVENS!

[@DjBogosFl]

2:25 Feel the VTEC

[@diegogsii]

Good morning, do you use gasket on the oil pan or only silicone grey glue to seal?

[@zachhaus8488]

it's over 9000!!

[@vincevegacustoms8860]

225whp b16a really?still has 1595cc displacement?great job!!how is the power curve up to 11k?i built one back in the days fully ported and built head,had 13:8:1 cr,polished knife edged crank etc whole nine yard and power was falling after 9400rpm...i dont touch anything under 2liter now haha ;)

[@Manchester7779]

+Vega-Expert those balancers help like the spoon cars had ... mad 13:8:1 hmmm good I have room to grow hahaha

[@mrmidnight32]

+Richard McConnachie Better have about $15k laying around too haha

[@romper4444]

Please does anyone have any info on the torque numbers on this. I'd love to know. I'm very curious if this has more torque than any b16 I've ever seen. Also what kind of dyno was this? Thx

[@swiftfx6928]

240whp at 11000 rpm probably means less torque to be honest

[@doglog18]

Where there any oiling issues because the motor was mounted front to back?

[@adorno1010]

lol I don't think the direction the motor faces will have enough any affect on the oiling

[@adorno1010]

lol I don't think the direction the motor faces will have enough any affect on the oiling

[@MrHBSoftware]

of course it impacts oiling, at the very least you need to put baffle plates on the sump or when you accelerate - brake the oil flow away from the pickup. i cannot see but at this level of quality maybe it has a dry sump system

[@MigsJ19]

+Hugo Barbedo it was in a description of another one of his videos, he does have dry sump

[@mitsos592]

Great power! what gearbox will fit on rwd b series?

[@billvtecRPM]

mitsos592 thanks, the gear box is a hewland ft200

[@bagelbytes69420]

I want this in my miata! :-0

[@roninsj410]

What class of racing is this car?

[@reez-fr8kp]

What speck this b16a n fuel?

[@jeffjefferson2676]

Your piston travel in meter per second is really high with this engine. Why did you choose this engine? Why not an engine with a shorter stroke?

[@TheBrownGarage]

what cams/ valve-train/ rods/ pistons/ crank?

[@billvtecRPM]

ChronicConnoisseur sorry sir, it's confidential for a championship. other car in this championship are equipped with the engine honda b16.

[@TheBrownGarage]

i see, totally understand, that things a beast. good luck with the races

[@daninturrisi8610]

billvtecRPM hey if the championship is over/ you don't think you'll be in the 1600cc class again; could you disclose the build specs:00:)

[@obtrunco]

I'm having trouble understanding on what gear do they do their final pull?

[@mrmidnight32]

+TONY LARIOS sounds like a fat 5th or 6th. That's some looooooong gearing for that little kart.

[@jdmvs.muscle3733]

+NoOneImportant556 unless its a b2k which i highly doubt its a 5 speed trans unless they are using a dog box either way 5 gears

[@mrmidnight32]

Now that's sum fucking vtec!

[@Bp1033]

what type of transmission is in that? it has to be pretty strong to handle 240whp

[@45Mang]

Bp1033 probably a Porsche tranny. they have the axle inserts in the back of the tranny. if it was mounted on a fwd, the axles sit one in front touching the rad and the other touching the firewall.

[@billvtecRPM]

hewland ft200 gear box

[@YoBoyNero]

Is this sarcasm? I can't possibly take this comment serious without laughing

[@boostjunkie2320]

@@YoBoyNero When considering what class the car races in, it's actually a good question.

[@toob247]

I love it, the vtec crack sounds great. One question. Why this over the torque of b18c?

[@FCInternazionale1145]

Because with how light I'm assuming this car weighs, torque really isn't much as necessary as power, plus the b16 can get revved much higher

[@toob247]

+RM Drummer in higher gears it takes longer to rev out in this though. Im betting its the race class rules that determines 1600 cc.

[@FCInternazionale1145]

+toob247 A pretty awesome build regardless haha

[@toob247]

+RM Drummer yeah he has some vids of nice b18c too so i was wondering. Maybe the track is a track with a long straight for top end . I dunno. Fantastic work either way

[@chadw4638]

+toob247 because you need hp hp is whats important.... this makes more hp at just about all rpms than a b18c does

[@theedge5584]

Where can I get the transmission setup

[@m0pelley99]

What kind of work is needed to reliably rev to 11,000 rpm?

[@popiwatv]

bottoem balancing, built top end, ie. valve springs, retainers, cam etc

[@mosescabusao9140]

sctflasher379 can you please be specific? I just want a high rpm

[@mingwei9924]

What crankshaft of this b16

[@ragelucas7830]

@billvtecrpm can you help guide me to build a b16?

[@abec666]

Wouldnt be just better to use the B16B engine for the supperior rod / stroke? Mad engine really.Who ever did the head flow upgrade must be super good.

[@kaityper7772]

CTR motors are hard to find, well for me atleast. It depends where you're at...

[@andysjamsandgearslams2556]

Actually the b16a and d15b are like almost perfect rod/ stroke ratio

[@rubenmendez1032]

What's the spec's on the engine and exhaust???????????????

[@mrmidnight32]

+Ruben Mendez Probably straight pipe or straight headers outlet and Im sure its either a fully built and or sleeved block.

[@gestaltgaragellc.9893]

If that motor ever goes up for sale.... : )

[@mingwei9924]

what crankshaft ?

[@dsmdasoundmachine6666]

I wood like to see the afr ratio the if u disable vtce and work on air fuel ratio and timing graph on low cam u tune it up to 8000 RPM then enable VTEC most likely set the VTEC 4000 thousand depending on the cam you can have a lot better fuel and horsepower and torque curve and make the power earlier so you wouldn't need to over rev the motor you're not making torque and RPM 8200 is when you start dropping to torque

[@daynight1921]

amazing sound

[@ZayedGR]

is this N/A or supercharged or the dyno is sounds like that

[@swiftfx6928]

what you hear is the gearbox

[@dReMiXeDg]

thats some major vtec

[@RayC-n1h]

What trans?

[@billvtecRPM]

Hewland ft200

[@leewalker4314]

bill where abouts are you in the world please say uk

[@aaronisgrate]

kind of wierd hearing vtec crack open on a full on track (prototype?) car like this. what races does this car compete in hill climbs??

[@msengineeringdavid3702]

There is no ''cracking open'' It's just a cam lift change.

[@nattsojaqs9822]

@@msengineeringdavid3702 We know. Its the lingo. Get with it.

[@peggypews2530]

Distributor?

[@chrish3079]

video of it driving!!

[@oscarzt1652]

but does vtec still kick in yo?

[@rokkstar115]

Oscar Thorpe yes it does. it kicks at around 4000 and operates full time after that. well atleast until the engine drops below said rpm level

[@dirkdiggler9082]

So 240hp on the engine.....No way it will put that on the wheels.Pretty hard getting that power on a B series.But awesome work btw

[@Fb6.Nan0]

Dirk Diggler not hard now days lol

[@vebzuia4336]

With good bolts on and a tune, a stock b20v can reach just over 200whp. Even built can reach over 300whp.

[@szary8780]

nice sound

[@ghosttubedude]

Bseries sound>Kseries sound

[@kevinbeneteau9882]

Bonjour ! auriez vous un site Web? ou page fb, j'ai un projet qui devrait sûrement vous intéresser

[@encoreleet21337]

never ending vtec

[@brandonwright2067]

Jesus glorious sounds

[@BrodeyDoverosx]

Okay, this is cool.

[@lexiss972]

yeah ! Des français ;)

[@QuantumPlaysOfficial]

Its basically a homemade atom

[@pebblez_]

beast

[@TristonSmith_ThePlumbingSmith]

Wtf taking so long to hit 10 k slos

[@45Mang]

Spoon and Mugen the owner's nuts. Haha

[@mhdfaiz4254]

nice

[@denis_vr6]

cams sound nasty

[@vincentlozano1677]

Siiiiiick!

[@thatswhatshesaid3406]

Noisshhh !

[@pjj12345789]

Ggod number choice 33 👌👌👌 /G\

[@hondajesus5989]

Hold on, not done accelerating

[@gunerfibercamberduke7649]

let me ges some one thanks its rice

[@pavel1809]

bro that engine is 2 close to you body

[@karlwinter5855]

+pavel1809 Light having an extra 1 foot of air is going to slow down exploding metal lol

[@WalkerKlondyke]

+pavel1809 Those N/A Honda engines blow out the side of the block or through the bottom of the pan. I work on them for a living and I've never seen them throw parts through the timing or trans side.

[@pavel1809]

Karl Winter lol lol

[@rustybritches6747]

lol, i have! i snaped a timing belt in a h22 @ about 8000 rpm and threw the #1 piston into the valves so hard it jamed up the exhaust cam while it was still winding and the thing basically exploded, put two big holes in the valve cover and a big dent in the hood, i have pictures on my old desk top, its the only reason i havent trashed it yet! it also started a nice oil fire on the header😄

[@geovani9543]

Un vvl corre mas

[@Giova2774]

pobre motor , no creo que les dure mucho

[@danielreynolds2913]

Sounds like sex

[@geovani9543]

Nissan manda

[@madjimms]

11,000rpm and its only 240hp? geez all that high rpm wear'n tear for such small numbers.

[@WartakMedia]

madjimms high revs = higher top speed,if they wanted numbers. they could have boosted it. they made it cause its restricted to N/A in the championship where the owner will race it.

[@SpenserRoger]

madjimms only 240hp? From a 1.6? u dunno nothing.

[@renski8976]

Madjimms, the 4a-ge 20 valve blacktop made around 240 hp at 11k. and it was only a 1.6. That's over 100 hp per liter.

[@daninturrisi8610]

AnimeLapse The 4age made 240 to the crank. This makes 240 to the wheels,which equates to 280hp or so. Also this is a 16v motor.

[@daninturrisi8610]

madjimms Fail.

[@diegogsii]

Good morning, do you use gasket on the oil pan or only silicone grey glue to seal?

[@billvtecRPM]

yes sir i use quick gasket loctite for the oil pan. but it's flat oil pan surface. oil pan for sump dry