Baby Ape Pro - range test with upgraded VTX antenna

Gear:
Drone: Baby Ape Pro with RHCP antenna connected directly to VTX by UFL plug
Transmitter: Jumper T-Lite v2 with built in ELRS module set on 100mw and 250Hz for stable signal
Goggles: Skyzone 02O
Battery: Tattu 3s 550 mah
This time around with upgraded antenna i went even further than last time with stock one, and video signal was very clear and consistent. For me very good and cheap upgrade worth installing on this drone.

[@henrirotthier5710]

First thing I did after purchasing the Babyape. Doing it on all my quads now. So cheap and the result is fabulous

[@hyperx6525]

Do you have a link for these antennas and the Plug Connector ? Thank you nice video !!!!

[@zawisza__czarny]

No to pęknie

[@pixxel8637]

Thats a good range, I think I can't go that far even with my 800mw vtx (but stock antenna) What length did you choose? 85mm seems good right?

[@bezimienny_fpv]

i just got angle ufl option of Lollipop mini RHCP, but its around 8-10cm so i think its something like that

[@hyperx6525]

And is the wohle Drone orginal from Darwin FPV oder did you change something else or only the Antenna ?

[@bezimienny_fpv]

its stock Baby Ape Pro with original vtx i add only the antenna

[@hyperx6525]

Hello ! can you directle plug the news antenna "Lollipop 4 RHCP" on the standart VTX from Darwin FPV ? And is there a big differend or it is possible to change also the standart VTX with 200mW to a new VTX with for example 400 ?

[@bezimienny_fpv]

yeah i connect this antenna directly to original 200mw vtx by UFL plug, just search on aliexpress for lollipop antennas and get one with UFL connector, they goes for around 5$.

[@bezimienny_fpv]

i have drones with 400mw vtx and i think it will do make difference, but for me 200mw is good enough for this size drone

[@hyperx6525]

@@bezimienny_fpv Okay Thank you very much !!!!

[@raleighro]

What antenna were you using on your goggles? would I need to change the antenna on them as well?

[@bezimienny_fpv]

im using stock antennas that came with my Skyzone 02o goggles, i mean this round and flat one, just regular stuff

[@raleighro]

@@bezimienny_fpv thanks for the amazingly fast response! I have a set of Skyo2c goggles and I assume have the same stock antenna. About 10cm long, and round all the way up. Are they a RHCP antenna? Or does it not matter?

[@bezimienny_fpv]

@@raleighro i have RHCP mini antenna on the drone, and on goggles its standard round one i dont know if its RHCP but it could be some kind

[@Unit2020]

Thanks for posting your video. I have a Baby Ape Pro V2 and my video feed is terrible. At about 30m out my video starts breaking up and at about 60m its so bad I can't see where I'm going. I did install an iFlight 5.8g FPV Antennas RHCP. Can you give me any tips about what I might do to improve my range? (Yes, I did check the settings in BetaFlight to make sure that VTX is set to 200mw) Also... how did you get the cam to output a 16x9 image? Mine is only 3x4.

[@bezimienny_fpv]

i don't know, maybe your antenna is damaged or something, and i stretch video in post process to 16:9

[@bezimienny_fpv]

also make sure you have the same channel on goggles and on drone, dont use auto search because it sometimes find wrong channel and video feed is weak

[@RazorConcepts]

Which antenna did you purchase?

[@bezimienny_fpv]

Lollipop 4 RHCP mini with UFL angle plug

[@dhavesy5730]

Is your receiver elrs?

[@bezimienny_fpv]

yes

[@ourchannel8215]

this motor good for 2s...3s got more power but not for long time ..if u push hard,your motor got die😅...no problem this motor type very cheap...

[@laslu9577]

Dasz link do strony na ktorej kupiłeś?

[@bezimienny_fpv]

siema, wpisz w aliexpress lollipop 4 rhcp mini i jeden z pierwszych wyników to te anteny i jak coś do Baby Ape'a pasuje antena kątowa z końcówką UFL

[@jetpackfuelv2]

What antenna ?

[@SparowGamingFpv59]

hi, which google have u ?

[@bezimienny_fpv]

Skyzone 02O