Baby Brezza Formula Pro Problems - Baby Brezza Troubleshooting (Why is my Baby Brezza not Working?)

This short video is on Baby Brezza formula pro problems and Baby Brezza troubleshooting. I go through the major and common issues and cover Why is my Baby Brezza Pro not working? I start the Baby Brezza formula pro troubleshooting by covering the four common issues with Baby Brezza. It will not run if any of these four happened. Baby Brezza has warning symbols on the screen to help us fix the issue. Hopefully, this baby brezza formula pro advanced troubleshooting video is helpful. Don't forget to give us a thumbs up and consider subscribing.
► Baby Brezza Formula Pro Advanced (Amazon): geni.us/BabyBr...
► Baby Brezza Replacement Funnel (Amazon): geni.us/Brezza...
► Baby Brezza Playlist: • Baby Brezza Formula Pr...
► Baby Brezza Formula Pro Setup - How to Video: • Baby Brezza Formula Pr...
► Baby Brezza Formula Pro Cleaning Video: • Baby Brezza Formula Pr...
► Baby Brezza Formula Pro Assembly - Disassembly Video: • Baby Brezza Formula Pr...
► Baby Brezza Formula Chart - Powder Setting Video: • Baby Brezza Formula Ch...
Baby Brezza Formula Pro Advanced Baby Formula Dispenser will automatically blend your formula with water creating a well-made bottle with warm water instantly. The Formula Pro Advanced will work with practically all formula brands as well as all bottle brands and sizes. You can customize the bottle maker to dispense water only, or create a 2-10 ounce mixed bottle complete with 3 different temperature settings.
Welcome to Arvin & Daddy! I am using my experience as a Dad and as an experienced Engineer to help in assembly, review, and how-to on Baby products. I do know how busy you are as a parent or parent to be. My mission is to help you save a little time in your busy schedule by simplifying or sometimes demystifying (!) confusing Baby Products.
* This video is NOT sponsored. Arvin and Daddy is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. This helps up to continue producing this content.
* Liability Waiver Disclaimer: This video is for entertainment purposes only. Any action you take upon the information on this video is strictly at your own risk. Arvin and Daddy, and all other associated persons research and review all content for this site to the best of their limited abilities and make no guarantees, representations, or warranties as to the accuracy and inclusion of all relevant information for each video, including but not limited to all video streams, suggested and provided links and resources. Under no circumstances will Arvin and Daddy, and all other associated persons be responsible or liable in any way for any content, including but not limited to any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated on this KZbin page. All parties specifically disclaim any implied warranties of merchantability or fitness for any and all purposes. We strongly encourage you to use the manufacturer’s manual and instructions and all the associated regulations.
Thanks for watching!

[@ArvinDaddy]

Thank you so much for watching. please hit the like button, it is very helpful with the KZbin algorithm 💐 ► Baby Brezza Formula Pro Advanced (Amazon): geni.us/BabyBrezzaPro ► Baby Brezza Replacement Funnel (Amazon): geni.us/BrezzaFunnel ► Powder Settings Finder (Manufacturer): www.babybrezza.com/FPA

[@johannycuesta6830]

Mi maquina me da error 3 alguna solucion

[@tuttuts560]

What do you do if it isn't turning on at all?

[@bromdulasta]

Mine was broken new out of the box I'm about to chuck it off my terrace too

[@pennpenn3503]

Your video was very helpful. Thanks

[@ArvinDaddy]

glad it helped and thanks for watching

[@thomash2897]

Thank you I used your video today to understand what was going on.

[@ArvinDaddy]

So glad you found it helpful Tom and happy new year 🎊

[@fredrikjohansson4534]

Hello, our screen is totaly black, it dosent answer when we are pressing any of the buttons, is it problem with the motherboard then? Other ideas?

[@valentina-qi4zx]

I hade same problem, did you fix it?

[@kadenhiggins9338]

Why doesn’t it alarm when it’s out of water like the older one did? I’m constantly going to make a bottle and there’s no water!! It’s frustrating!

[@ericariveros8948]

Thabk youuu for thw video. It helped me today 🥰

[@ArvinDaddy]

glad it helped Erica

[@Hamsc13]

Do you know what blinking funnel means?

[@ArvinDaddy]

who?

[@abigailacosta-mm3pn]

Error code 1, where is the motor

[@angelicaquintero1495]

Hola necesito ayuda !!! Al darle al boton verde lo unico que hace es ruido coge agua y lo hecha por la boquilla de arriba del recipiende del agua y no sale agua por dodne pones el biberon.

[@ArvinDaddy]

:)

[@cursedxad]

I really need your thoughts on this. I noticed a few things with the one I bought and I want to ask if it's normal or if it's a defect so I could return it. 1st: My measuring wheel does not lay flat when placed in the Powder Container. I tried pushing it but it always seems to be tilted to one side. 2nd: Due to the measuring wheel's tilt, after placing the locking cover, the stirring wheel does not click properly. 3rd: After several attempts to get that stirring wheel "click" and stability, after turning on the machine and using it, the powder container starts bouncing and as a result the stirring wheel becomes loose again. I'm this close to returning, looking toward to your valuable response. Thanks!

[@ArvinDaddy]

Greetings and sorry for slow response, do you still need any help?

[@111alshamsi]

You need to return it

[@jahanyfard]

very helpful... thanks :)

[@ArvinDaddy]

Thank you so much for watching 🌺

[@nargesskazemizadeh9965]

very helpful video. thanks a lot

[@ArvinDaddy]

So nice of you, Glad it was helpful!

[@jenellebatchelor8726]

Was very good thank you

[@ArvinDaddy]

Glad you liked it!

[@thechooch98]

Please make a video on how to fix the machine making half or 1 Oz. Over the machine desired Oz setting. The machine first day made each use exactly to the desired Oz. Setting. Now it's always atleast half over. I cleaned it... disassembled and reassembled many times...same result. Why did it start out fine then change to always over half an ounce?

[@ArvinDaddy]

Wow, this is frustrating. So cleaning, assembly and disassembly did not fix the issue at all, or just temporarily fixed?

[@lissyorellana3864]

@@ArvinDaddylos botones de mi baby brezza no responden últimamente solo estaba para 4 onzas por que no me funciona el botón para poner más o menos y ahora solamente funciona el botón de star y solamente tira la fórmula no funciona otro botón ni el de apagar que debo hacer

[@cindyruizcastaneda2902]

Me podrías ayudar porque a mi baby brezos me aparece un código 29 A

[@ArvinDaddy]

¿Estás seguro de que es 29? Tiene códigos de error del 1 al 8.

[@aminedjoudi9657]

What about error code 7 please, my babybrezza is locked and not working 🥴

[@ArvinDaddy]

error code 7 indicates that the powder container lid has been opened during operation. Make sure the powder container lid is entirely closed, and press & hold the "stop" button to clear the code. The machine will return to the normal

[@breezzeeshoulders2610]

How helpful is this versus just adding powder and mixing it with water yourself? I mean is this really convenient and save time?

[@ArvinDaddy]

it is for sure convenient. but does it justify the price tag? IDK!

[@breezzeeshoulders2610]

@@ArvinDaddy hmm I just might do it the old fashioned way

[@ArvinDaddy]

makes sense

[@franciscoeliastapiarubio2043]

ERROR CODE 4, NOT WARMING UP, YOU KNOW SOMETING??

[@ArvinDaddy]

The E4 error code means your machine's water temperature sensor is malfunctioning. You can try to resolve this by pressing the button on the far right of the Control Panel for 10 seconds to reset the sensor. Then make another bottle and see what happens. If the E4 error code doesn't return, then the issue is resolved

[@alisiaclemow2455]

Mine has e4 but it will not reset what do I do now