Back In Black!!! 2000 Kenworth W900 Aerocab overhaul

The team gets an unexpected surprise when this Colorado Springs Kenworth reveals a few dirty secrets after its arrival at Flash Industrial.

[@micahpaul20]

Work that’s not done right intentionally should 100% always be called out. That’s really the best way for someone to learn what not to do. Keep up the honest hard work my brother 💪🏻

[@teams.t.e.a.m6214]

In this business...there's almost no reputable truck shops. I know that because almost every single job I come across has already had some other painter in there and they've nearly always done a lousy job. Thanks a lot!

[@scottycollins1829]

Gr8 Footage & glad 2 see that U show shady paint jobs are done by ppl who don't take PRIDE in their work.

[@teams.t.e.a.m6214]

Thank you very much! It's something we're literally always dealing with around here.

[@randyhale4181]

The haters are going to hate. Just keep doing what you're doing👍🏻

[@teams.t.e.a.m6214]

You said it, my friend! And I'll happily show them the door so they can go and do it somewhere else.

[@bigyellowjimmy]

An honest man does what's right when no one is looking. This truck was a great example of what lazy, dishonest men do when no one is looking. Keep on doing what's right Ray, never change 👍

[@teams.t.e.a.m6214]

I agree completely, my friend! It's the very definition of character and essential for good work ethic. Thank you very much!

[@ljkck3578]

What a beaut! So satisfying to see. And keep calling out the poor work and the haters. I have no time for either of them.

[@teams.t.e.a.m6214]

Accidental poor workmanship can happen and is quite forgivable. Heck...that's how I learned almost all of my lessons over the decades was doing it wrong...by simply not knowing better... at one time or another and coming to regret it. But that's not what I ever seem to run into. What we see around here time and time again is short cuts and lazy work ethic that were performed by shops that were charging a fortune. Thanks a lot!

[@anthonymazzoni3671]

Give em hell Ray!! Too many hack shops out there ripping us off! I'm hoping to get my K100e Aerodyne up there to you this year. Best big truck paint/body shop in the country! 🇺🇲

[@teams.t.e.a.m6214]

Awesome buddy! Thanks a lot for your positive input!

[@altafisher3127]

Man, u did an outstanding job on that truck keep up the good work and the hell with what other people think

[@teams.t.e.a.m6214]

Hay thank you very much, my friend!

[@billbonu1639]

My first truck was a 1999 w900 assigned to me at Harold Ives out of n little rock.550 cat with a super 10.love that truck!a lot of companies get their colors on there as cheaply and quickly as possible.I was gonna lease to American van lines and they wanted their shop to paint my truck white and I was like nah I'm good.

[@teams.t.e.a.m6214]

Don't blame you there, my friend! Chances are through the roof that it would have been regrettable to say the least. I mean...just how many truck shops in this whole country will do an honest deal and a good job as well?..... Probably less than 10...if I had to guess. All we ever run into around here is garbage after garbage.

[@bensandoval9280]

Dang you do excellent work. That's the way you do it!!!!. Those trucks came out sharp

[@teams.t.e.a.m6214]

Thank you so much, buddy!

[@MyTruckerdave]

What Ray does is artwork, period !!

[@teams.t.e.a.m6214]

Well thanks, my man! I appreciate it

[@gangsterdiesel0093]

Your work is absolutely awesome, you old school I like that . Thanks for sharing your expertise. 👍👍👍👍👍

[@teams.t.e.a.m6214]

Well I certainly appreciate that, my friend!

[@EdmondBouchard-sy3ml]

Nice job and I like how you go beyond and doing it right! Thanks for sharing.

[@teams.t.e.a.m6214]

Well thank you very much, my friend!

[@donkintz281]

Turned out great ❤ thank you for all your hard work and great videos!! Can't wait to see what's next.

[@teams.t.e.a.m6214]

Hey thanks, my friend! I appreciate it

[@johnboyd2099]

Beautiful truck I hope he enjoys his truck now it looks like a brand new truck Keep On Truckin and be safe

[@teams.t.e.a.m6214]

Well thanks a lot!

[@BumDogSuMo]

Man! That truck looks sinister now. Another great job!

[@teams.t.e.a.m6214]

Hey thanks a lot, my friend! Much appreciated

[@danspak1671]

EXCELLENT JOB RAY!! ALWAY'S A PLEASURE TO SEE THE FINISHED PRODUCT. I GOT SOME CHOICE WORDS FOR THE FOR THE HATERS!!!!!

[@teams.t.e.a.m6214]

I actually had a smart mouthed p.o.s. give me his half penny's worth earlier today...but I did what I always do...which is simply block my channel from his future viewing to protect his obviously sensitive little eyeballs and ear drums from any of my future harsh words. I don't feed trolls. Unless, of course...they want to gather up their stones and stand in front of me when they talk trash. In that case...I'll be happy to engage literally anyone. I just don't choose to do it over the internet. Heck...I was an undefeated cage fighter for a full decade in the earlier 2000s. While still running this business. One of my fights...which took place in front of a crowd of over 3600 people and even made the evening news... is even floating around on youtube somewhere. ( I didn't put it there.) Thanks a lot, buddy!

[@richardsalyers1643]

You did a great job painting your truck looks great when you paint black an good looking job like this you know what your doing

[@teams.t.e.a.m6214]

Well thank you very much, buddy!

[@3sparewashers-lg3gf]

I agree with your stance on calling out shoddy work. Making mistakes in any professional field is essentially inevitable, when that happens though there is a moral obligation to fix the situation at no burden to the customer. And they don’t happen repeatedly. I work construction and the things I see contractors pull is frankly appalling. The customer is the one feeding your family, so you as the contractor have a duty to do the right thing by them. I can’t help but feel you are one of the increasingly rare honest painters that actually value their work and care about doing it right. Most of those guys are retiring or have just been run out by the low-rent outfits. That truck just reeks of gross incompetence or blatant neglectful practices by the last painter, either way they don’t have business painting so much as a mailbox.

[@teams.t.e.a.m6214]

I almost never run across an honest mistake. It's always about taking the easy way out and being secretive and shady about it. Thanks for your input!

[@3sparewashers-lg3gf]

@@teams.t.e.a.m6214 Agreed, an honest mistake should never be evident after the fact.

[@charliehale1764]

your absolutely correct, the life of a good paint job is in the prep.

[@teams.t.e.a.m6214]

Yep! It takes days...even weeks to properly prep a project for paint and only hours to actually prime and paint it. And while all steps are important ...you've got nothing at all if you haven't taken the time to prep it right. Thanks a lot!

[@jfaunce68]

Absolutely beautiful your attention to detail is absolutely amazing and second to none . Great job my friend you are quite the artist

[@teams.t.e.a.m6214]

Well I certainly appreciate all your kind words!

[@ice-cold4342]

I try appreciate people that take pride in their work.respect my man.

[@teams.t.e.a.m6214]

Well, I certainly appreciate that!

[@paulsackett3485]

I love your no BS approach and high quality work. Keep it up!

[@teams.t.e.a.m6214]

Well thank you very much! I appreciate it

[@ATF1985]

Just found ur channel today , I drive semi and really enjoy ur videos

[@teams.t.e.a.m6214]

And I see that you subscribed as well. Thanks a bunch, my friend! Always appreciated.

[@truckinwitlewy8517]

Now that’s a beautiful paint job… my W900 is the same color but definitely in need of a fresher upper!!! 😊😊😊

[@teams.t.e.a.m6214]

Well thank you very much, buddy!

[@paulraaijmakers6056]

Again a perfect job Ray!

[@teams.t.e.a.m6214]

Thank you so much, my friend!

[@garyuren3810]

Are you doing a great job? I’ve been watching your videos for a long time it’s like you do such a good job on them pay jobs.

[@teams.t.e.a.m6214]

Not sure about your wording there. I'm just assuming that first sentence was a result of auto correct. Thanks for watching my videos and your input as well!

[@charlottealdridge2180]

Dude you are top notch all the way and all the time

[@teams.t.e.a.m6214]

Well I definitely appreciate that, buddy!

[@tracymankey9314]

Beautiful work does not look like the same truck ❤

[@teams.t.e.a.m6214]

Well that is much appreciated!

[@bencojo6846]

Man I just hard to believe that there’s such shallow shops that do this, and this is why I do all my work. Nice work

[@teams.t.e.a.m6214]

You said it, my friend! Thanks a lot!

[@DirtBrute]

I like that you called them out. I paid a company $10k to do my Peterbilt and they had the truck for three months. I got it back and the paint was peeling around the rivets. They took it back to fix it and put me on the back burner. I couldn’t use it for work and they gave me a bill for the extra work which I had to fight with them over because it should been done for the price I was quoted in the first place after they took the truck in for an evaluation before giving me the price. I had a budget and I told them look at it first and make sure you can do it for the price you quote. I drove it 2 hours to their shop so they could evaluate it. They said we would be an extra $2k. I said ok but anything more and I can’t do it . When it was all said and done, they tried to charge me double because they had to paint it twice. I told him that’s not my problem. You should’ve did it right the first time. I’m in construction I don’t get to charge my customers twice for the same job if I screwed up. Keep up the good videos man !

[@teams.t.e.a.m6214]

I called this owner as soon as I figured out just how extensive this job was set to be and changed the price by only a few thousand dollars. The pressure washer alone was twice that much. Sometimes you step right in it in this business...and when that happens, you just gotta take it on the chin. One thing I never do is take it out on the customer. Takes a lot of nerve for a shop to charge you to repaint something they screwed up to begin with. Like I've said for decades now.... Show me 100 truck painters...And I'll show you 99 crooks! Thanks a lot, My friend!

[@DirtBrute]

@@teams.t.e.a.m6214 99 out of 100 . I totally believe it after have some of my trucks painted. Have a good one sir !!

[@Nich_Pavelow]

Wow. This was one of the greatest things I've ever watched! The passion, detail and respect you have for tge truck blew my mind. It would be a total blessing if I could get you to do my old truck like you did this W9. SUBSCRIBED! 🫡

[@teams.t.e.a.m6214]

Well thank you so much for all your kind words!... And thank you as well for subscribing!

[@robpeters5204]

Love your work! This is exactly the reason you have to be really knowledgeable when buying a used truck. So many a-holes out there ripping off hard working people. When ever you go to buy a used truck and looks really shiny and new, that is a huge red flag!!! You really need to educate yourself when looking at a used truck or take someone along with you. Never get your hopes up or get exited when looking at a nice shiny used truck. If it’s too good to be true……… Why did you not use paint stripper for the entire truck after seeing this nightmare? Keep up your good work!

[@teams.t.e.a.m6214]

Thanks a lot! I didn't need to use stripper once I was down to factory paint. Besides, stripper shouldn't be used on anything fiberglass...so that means it never would have been stripped completely anyway. Thanks again!

[@paulgodden8226]

I love it. She looks great

[@teams.t.e.a.m6214]

Well thank you very much! And thanks for subscribing as well

[@daviddickey4331]

First of all i would like to say that i'm a Subscriber to your channel and i really enjoy it. Great work that you do. Never mind the negative people. I wished that i could of met you 5 years ago because i've would of never trusted someone to paint my truck and they scamed me and lead me to spend time in prison for putting hands on two guys that painted my truck and after a week on the road the paint started to do the same thing that you are talking about. I see how much pride that you do from your heart. Keep up the great work. """ TWO THUMBS UP """ You are the man

[@teams.t.e.a.m6214]

Well...first of all... you are never wrong for putting hands on someone who stole thousands of dollars from you by misleading you. That's just the sort of attention they were asking for when they pulled a stunt like that. Unfortunately...the law doesn't see it that way. Still...thanks a lot for your kind words and also for subscribing!

[@terryjacobson7325]

Proper planning and good job as always

[@teams.t.e.a.m6214]

Hey thanks a lot! Much appreciated.

[@martineames2491]

Love your work Ray! Best channel ever!

[@teams.t.e.a.m6214]

I certainly appreciate that, my friend!

[@kevinmcpherson6999]

Great work. And your right. Tell the so called bodymen and painters exactly what they need to hear. Great job.

[@teams.t.e.a.m6214]

Hey thanks a lot, Buddy! A lack of knowledge is one thing...It happens to all of us at one time or another. But that's almost never what I end up coming across or dealing with. Incompetence...Plain and simple. I've seen it a thousand time in this business...and heard another ten thousand horror stories from customers about their previous experiences in the truck auto body world.

[@kevinmcpherson6999]

Well, I'm a journeyman auto body guy for 35 years. I ran a heavy truck shop for 9 years. I would not allow that type of work coming out of the shop. So I agree 100% with u.

[@scottycollins1829]

Glad to see it Gettin PROPER PAINT WORK!!!!! 😎🔊🔊🔊🔊🔊🔊🔊🔊🎥📹📽📸🏆🏅💎💰💰💰💰💰💰💰💰🇺🇸👍🏾🙌🏾

[@teams.t.e.a.m6214]

Thank you very much, my friend!

[@rrobins9857]

Your Boys got a pretty good Ol'man!

[@teams.t.e.a.m6214]

Well, I certainly appreciate that, my friend!

[@alvarogeorgenobregeorge69]

Krep up the good work, Watching from Brazil

[@teams.t.e.a.m6214]

Well a big hello from the center of the U.S. my friend! Thank you very much!

[@kymw7833]

Mate you do beautiful work its unbelievable how the old paint blew of with the pressure cleaner,and its great to see that old W9 looking like new again . Cheers kym Adelaide

[@teams.t.e.a.m6214]

Well thanks a lot, my friend!

[@3406e]

awesome job man. yes crooks should called out!

[@teams.t.e.a.m6214]

Well thank you very much, my man!

[@amiransarifar3404]

I like your ways of working with discipline You always do it from zero awesome outcome. GREAT JOB.WATCHING YOU FROME TORONTO

[@teams.t.e.a.m6214]

Well I certainly appreciate that! And a big hello to you and our other friendly upstairs neighbors!

[@1911MikeinOregon]

Looks good... There are far to many people that don't care. The only thing they care about is getting paid. The people that whine because you call out someones crappy work are part of the problem in the world today. They don't want to hurt someones feelings or offend them. Remember, everyones a winner in 2024... Why would anyone actually pay for a job that was that crappy. You don't even have to be a painter to know that the job sucked when the panel behind the drivers door has 2 inch runs hanging off the rivets. I've never seen runs like that before. That gives a new meaning to hosing it on... You would see it every time you got in the truck. I would have lost it if that was my truck and I went to pick it up after being painted. Unfortunately for the owner of the truck, they could see the runs, but they had no idea what kind of mess was underneath all of that old paint, and it literally was a mess. Ironically I drove truck for 40 years, and I've also done a lot of painting. I've painted several show cars, my race cars, and I spent about a year painting multi-million dollar motor homes. You spray a ridiculous amount of material painting those things and I can honestly say I never had a run of any size spraying all of that B/C material.

[@teams.t.e.a.m6214]

And while I have never had a run on a domestic vehicle...I have had a few from rivets myself. It's just part of the learning process and besides...I know how to color sand them out . So it's no harm done when it happens. To create a bunch of them and just leave them, however, is unacceptable. Thanks a lot for your input!

[@johnarnett1172]

Beautiful work sir turned out Great 💯👍

[@teams.t.e.a.m6214]

Why, thank you very much!

[@johnduncan9749]

The hinge is there so you can replace the air filters because the mirror bracket is in the way. You cannot take the top of the breather off because there is not enough clearance, but you can take off the two bolts and nuts opposite the hinge and the air tubes and the whole breather will swing out.

[@teams.t.e.a.m6214]

Good to know.

[@jacobbuckley8232]

Man u do awsome body work!!

[@teams.t.e.a.m6214]

Thank you so much, My friend!

[@jacobbuckley8232]

@@teams.t.e.a.m6214 welcome.

[@angiedreamergirl8784]

You are pretty awesome, others don’t know what good is. Prep is the most important part of the paint job. Keep up with the great videos. I’m very impressed. I’ve been a mechanic for 46 years. I can tell the difference. You can gladly paint my Pete anytime 👌👍

[@teams.t.e.a.m6214]

If this vocation has taught me anything throughout the decades...it's been patience. If you don't have that...you won't see the results that both look good and last. When you wanna get on the books with that mighty Pete of yours...just message me through my fb page and well get that ball rolling. Thank you vey much!

[@derekcarlson4915]

That spot on the back of the sleeper where you said they burned through the paint and painted over it I think is probably where they were carrying their spare tire and it was rubbing against the sleeper right through all the paint and then they just painted over it without sanding it out. I have seen that many many times.

[@teams.t.e.a.m6214]

Could very well be. Either way...It's easier to simply paint over it rather than just doing what the trucks owner paid for.

[@brandonoswald2392]

Effing hacks. I deal with the same thing you do. But on a smaller scale. Another quality job by Team Steam. An ounce of prep will save you a day of heartache.

[@teams.t.e.a.m6214]

You said it, my friend! Thanks a lot!

[@fredschell3972]

Great job.

[@teams.t.e.a.m6214]

Thank you very much!

[@grumpbrewer5893]

Looks Outstanding!

[@teams.t.e.a.m6214]

Thanks a lot!

[@ronracz9145]

Love this man’s work 👍

[@teams.t.e.a.m6214]

Thank you so much!

[@allenmitchum9356]

Looks incredible!

[@teams.t.e.a.m6214]

Thank you so much!

[@bigmackstruckstop9213]

I enjoy your show, and I love the work you do, it takes time and the trucks are beautiful when finish, I'll catch ya on the next one.

[@teams.t.e.a.m6214]

Well thanks a lot, My friend! Much appreciated

[@bigmackstruckstop9213]

@@teams.t.e.a.m6214 your very welcome

[@jeffreymartin1892]

Good call on replacing the air cleaner hinges. I just did that on my 1997 W900L. Spacers are better and don't rattle when they get worn.

[@teams.t.e.a.m6214]

First time in a quarter century that I've ever replaced them. One of the easiest parts of this job...as it turned out! Thanks a lot!

[@jeffreymartin1892]

I know. I've owned dozens of KW's thru the years and never used the hinges. I've even replaced them when they started rattling - how dumb is that. I enjoy your videos and your work. Garbage is garbage. Don't ever worry about calling it out!

[@JamesPretty]

another great one brother.

[@teams.t.e.a.m6214]

Well I certainly appreciate that, James!

[@JasonSmith-vd1sz]

Beautiful paint job!

[@teams.t.e.a.m6214]

Thank you so much!

[@jonvanhouten8369]

Top notch work sir!

[@teams.t.e.a.m6214]

Thank you so much!

[@SamMassie-nw6nv]

Looks good Ray!

[@teams.t.e.a.m6214]

Thank you very much, buddy!

[@glenquagmire828]

Love the videos Love your honest opinions also

[@teams.t.e.a.m6214]

Well I certainly appreciate that!

[@eddiesica3649]

I need them mirror frames !

[@teams.t.e.a.m6214]

Well...if you are quiet, careful, and work under the cover of darkness...maybe you can end up with a set for free!

[@carldillow3500]

Ur awesome painter n doing the semi truck for truck drivers 😊

[@teams.t.e.a.m6214]

Well thank you very much! I appreciate it

[@luiscolon3045]

Excellent job love you work

[@teams.t.e.a.m6214]

Thank you very much!

[@scottreed5460]

AWSOME!

[@teams.t.e.a.m6214]

Thanks a lot!

[@andrewwithall522]

You did a beautiful job.

[@teams.t.e.a.m6214]

Thank you so much!

[@Zzzzzzz919]

Really nice work

[@teams.t.e.a.m6214]

Thank you so much!

[@user-vj9hp8gw2r]

100% right mate . Love your work

[@teams.t.e.a.m6214]

Well thank you very much!

[@jimmy..9532]

Great to watch a man with standards do great work..plenty want the money but not make the effort should wear a mask when there robbing you! Hi from Scotland

[@teams.t.e.a.m6214]

Thanks for your positive input...And hello to you fine folks over in Scotland as well!

[@TheSAM2SMOOVE4U]

Great video.

[@teams.t.e.a.m6214]

Well thank you very much!

[@bmwdorian01]

Bad bodywork is the worst! I would gladly pay you to paint a truck. Keep it up.

[@teams.t.e.a.m6214]

Well I definitely appreciate it, Buddy!

[@localinthe330]

Goly bum did that turn out nice...you sir can sure make them look good again!

[@teams.t.e.a.m6214]

Thank you so much, my friend!

[@schoonymopar]

great work I just wish you'd show more how to. as a single truck owner I'd like to learn how to make some body repairs my self.

[@teams.t.e.a.m6214]

Well...you can always do some scrolling through my back log of videos, because I've covered the how to's on bodywork in more than a few of them. Even as recently as within the last half dozen or so videos...I go over how to fix dents, doing fiberglass repairs, and even masking. Thanks!

[@schoonymopar]

@@teams.t.e.a.m6214 will do thanks

[@jamesseley4885]

Nice job.❤

[@teams.t.e.a.m6214]

Thanks a lot!

[@colincrawford687]

Yeah work that should have been done correctly should be 100% Always Be Called out of all of their shootie workmanship So keep up your Great work on showing the shootie workmanship

[@teams.t.e.a.m6214]

Thank you very much! I appreciate it

[@christoffer1973]

Less and less people doesn't have pride in their work. I think most do to a boss that doesn't make workers enjoy their work. Often result in bad result. Love your videos! I would pay a little more to get a great job. But some garages have high price and shit result.

[@teams.t.e.a.m6214]

High prices and subpar results are the norm in this line of work, unfortunately. Thanks a lot, buddy!

[@rbj2292]

Excellent job! You're 💯 percent right! If they can't handle the truth move on..

[@teams.t.e.a.m6214]

Yeah..you know? There are plenty of youtube channels that host never ending politeness and positive vibes... They can always Go find and critique one of them! Thank you very much!

[@kevinstevenson9853]

Good job. Big Bro.

[@teams.t.e.a.m6214]

Thank you very much!

[@russellmcknight7226]

That pressure washer seems to work great,,I drove past the plant where it was built in Sussex,New Brunswick today.

[@teams.t.e.a.m6214]

Good ole Canadian quality! Some of the toughest trucks come out of there as well. I'm very happy with the washer so far...and the overall quality is outstanding as well. Go Canada!

[@sethhilt2056]

Beautiful job! If you don't mind me asking, how much would a job of this size cost a guy? I'm betting my truck is gonna need as much work as this one did.

[@teams.t.e.a.m6214]

I originally bid this one for 15 grand...which is typical for an average sleeper truck around here. I raised the price to 17 after I figured out what we were in for...but I only did it that way because the guy had already brought the truck to me from over 7 hours away and my pressure washer had already destroyed the appearance of the passenger side by then. So I took it easy on him due to those circumstances. If I had known from the beginning how it was going to go...I would have bid it in the 20 grand range. Thanks a lot!

[@48statenomad]

Shit if I knew who did the shotty work. I'd call them out on social media. People either bitch about nothing or cry for the shady characters. People are weak. Good thing you have passion and give a damn.

[@teams.t.e.a.m6214]

Sounds like we may be cut from a similar cloth, my friend! Thank you very much!

[@gliderider7077]

lol crappy work should be called out, craftsmen continue their craft by ridiculing others garbage work. Sh!t is sh!t and should be addressed accordingly .. it’s your life and livelihood, only people are complaining are those who don’t have a craft or do sh!tty work 🤷🏼‍♂️. WOW that turned out amazing man! Never cease to amaze me

[@teams.t.e.a.m6214]

And in my field anyway...there aren't many true craftsmen left! Almost every single job that rolls into my shop has been butchered at one time or another by some slacker with a paint gun. Thank you very much! And thanks for subscribing!

[@andrewwithall522]

That’s a bloody good pressure washer.

[@teams.t.e.a.m6214]

It wasn't cheap... but I wanted a good one...and one with a Kohler engine on it as well. Pretty happy with it so far. Thanks!

[@danielgarcia1147]

Great work, what is your trick to get a good prep job around all those rivets?

[@teams.t.e.a.m6214]

I actually go over that in detail in the video I released just before this one...which is quite a bit more thorough than trying to explain it here. Thank you very much!

[@flemmingpaatschnielsen6470]

You are a pro

[@teams.t.e.a.m6214]

Thanks a lot!

[@chrisoo8998]

Im a spray painter by trade. Geez what a big job this is

[@teams.t.e.a.m6214]

Yeah...we get ourselves into some marathons around her and have for the last quarter century. Thanks!

[@goranb3062]

Great work love the videos What to you guys charge of a paint job

[@teams.t.e.a.m6214]

That one ran 17 Grand... but it would have been closer to 20 if I'd known about the extent of the carnage before the guy drove it almost 7 hours to my shop. Neither of us knew how bad it was going to be...so I took it a little easier on him. Thanks a lot, buddy!

[@Zzzzzzz919]

True that!

[@teams.t.e.a.m6214]

Hey thanks a lot!

[@angeldelgado9049]

That is true!!!

[@teams.t.e.a.m6214]

Hey thanks a lot!

[@TheRedpete379]

Keep calling them maybe they will change there shit work as always great job 👏 👍 👌 🙌 💪

[@teams.t.e.a.m6214]

Thanks a lot, buddy! They will never change...but at least I can slam them on occasion for it!

[@colin8532]

HOLY CRAP! Wow! You took a piece of crap that looked like it was put together from pieces found laying around a scrap yard and turned it into an absolute piece of art! Seriously, all that's missing is your name signed on it! As for calling the other so called body guys, I agree 100%. Call them out every chance you get. Hell, if you could find out the names of who did the work, make it public too. They're never going to stop, so the best you can hope to do is to educate people so they know enough to stay away from them.

[@teams.t.e.a.m6214]

Thanks a million, my friend! I appreciate it

[@davidburridge4688]

I like your channel I watch a guy in Canada his name is Mark from twinstickgarage I'm going to subscribe to this channel

[@teams.t.e.a.m6214]

Well thanks a lot, Buddy!

[@user-le9zw2sg9x]

Wow, where are you located? you R the guy I Have been looking for.

[@teams.t.e.a.m6214]

Upton, Wy. Just message me through my flash industrial FB page if you want to get the ball rolling on a project. Thank you very much!

[@user-ke8ff6uz9v]

What kind of paint did you use? Looks good.

[@teams.t.e.a.m6214]

I use PPG 2K urethane usually. Sometimes I'll shoot Axalta brand 2K urethanes as well. Those are the guys that make both Nason and Imron. Thanks a lot, Buddy!

[@leejohnson6173]

Ultimately if you want your Chanel to grow any and all comments are good for the algorithm..Turning off the comments will tank your channel..Just ignore them and carry on.

[@teams.t.e.a.m6214]

Naturally...I want my channel to grow. But my channel is run much like the rest of my life has been up to this point.... With uncompromising pride. So while I don't take the negative opinions of others seriously...Heck...I dont even think about them really. But by the same token...I also Don't put up with disrespect. Thanks for your input...and thanks for subscribing as well!

[@peerlessevents]

Where can I find more info on this company? Website? Only want a paintjob by you guys great work

[@teams.t.e.a.m6214]

I can be reached through my flash industrial painting FB page. Just go there and message me. Thanks a lot!

[@MannPropertyServices]

Hey, what are your shop dimensions and door sizes? Looks like a good size

[@teams.t.e.a.m6214]

I'll admit that it looks bigger in pictures and video than it does when you are actually standing in it. I built that part of the shop myself well over 12 years ago with materials I got in trade for a large amount of paintwork. Got the property it sits on in a trade as well! When I started this business almost 25 years ago...I was renting shop space from crook after crook and didn't have a pot to piss in... so I had to be creative when it came to getting set up and independent. It is 30 X 63 with 16 foot sidewalls and 12 X 16 doors. Basically perfect for what I do. There is an addition built on either side (also built by us a few years after the original shop was) of the room you are used to seeing that triple the outside dimensions though. Thanks!

[@garyuren3810]

Do you use clear coat I never see you put it on

[@teams.t.e.a.m6214]

I do base clear from time to time. But most often I shoot a high quality single stage urethane that is called a 2K urethane.

[@chrisdavis4433]

I would be pissed to pull my truck out of service to get it painted and have it done wrong

[@teams.t.e.a.m6214]

And I've heard literally hundreds of horror stories from people and customers over the decades about that exact scenario playing out in their lives. Fixed hundreds of them as well.

[@pupweiller1]

Is that single stage or base/cleat you used?

[@teams.t.e.a.m6214]

Single stage 2K urethane.