Big power upgrade SUR-RON Build Part 6. Electron Cycles big 72 volt battery with 25kW of power

[@johnsshed995]

No magic smoke ,thank goodness.A job well done 👍👍👍

[@baconbuttties]

@@johnsshed995 It was a magic smoke free zone thankfully 👍

[@iw1669]

Вы Волшебник!!!. Удачи с колесами.

[@baconbuttties]

Thank you 👍👍

[@Chefonaron]

You sir are a legend. No crap. Just good proper KZbin videos. Hats off and good luck with all that power 😊

[@baconbuttties]

@@Chefonaron Thank you 👍👍

[@juice9767]

You need both of those discharge cables to go to your controller if your trying to get the proper high discharge that battery may be capable of. 💯 Looking forward to seeing it completed 👍

[@baconbuttties]

@@juice9767 I can't use both cables with a torp controller. That's what they state and Electron cycles said the same thing 👍

[@juice9767]

@baconbuttties 😲 I'm very curious on the specs of your Controller .. 🤔 What's its listed DC amps and phase amps? The battery should ALWAYS be able to deliver more current then the controller's DC amps draw.. otherwise you can run into Thermal Runaway and create a Ghost Rider situation.. and especially if your trying to build 25kw Both of those discharge cables would be needed.. Right now I'm running a 96Volt battery capable of delivering 810DC amps to a Fardriver nd961800 I've got two high output cables, and this winter I'm thinking of having a 3rd discharge cable added. So far my build has peaked over 50kw, but by next year I'd like to easily peak over 60kw kzbin.info/www/bejne/npe1oamsm9aLmqMsi=UFmORL5ElfENDRur

[@baconbuttties]

@juice9767 The battery is capable of 25kW bursts. The TC1000 controller paired with a TM25 motor is rated at 25kW... I won't be running it at 25Kw 👍

[@Bengy22]

That's what I was thinking, I've seen people melt that connector running 13kw, I assume electron cycles expects you to use both to the controller. Honestly surprised they didn't stick a qs8 anti spark on the battery

[@baconbuttties]

@Bengy22 electric cycles state not to use both cables

[@Bboymoped]

Hi fella. Is that display plug and play with the torp and of so where did you get it please.

[@baconbuttties]

I got it from Aliexpress SiAECOSYS it's CT22... It's not plug and play as you have to wire it up and change some parameters on the display settings

[@joepaquet4332]

Hello, have you had to trouble shoot a wiring harness in the past. I have a multimeter but the tines are so small the probe points will not fit (oh to have such a problem), anyway I was wondering if you have come across this issue and if there is an off the shelf tool for testing?

[@baconbuttties]

@@joepaquet4332 why not find something metal that will fit and put the multi meter to that

[@joepaquet4332]

@@baconbuttties yes, I'm going down that road, fat fingers, dimming eyesight, slow mind and reaching for a second beverage while working on electronics...now where were those swear words I was looking for....

[@johnerbudman123]

We hey

[@baconbuttties]

@@johnerbudman123 👍👍