BAD NEWS FOR THE SKYLINE 😢

[@markygutierrez4195]

Feels like Sammit is living the actual Tokyo drift movie in vlog format

[@campkira]

i had more fun living in tokyo... sammit just endlessly fixing car....

[@mikehegs6413]

the intro :D soooo good !

[@T-Crack]

Knew that song was coming 😂👌

[@FerdinandReisch]

If your harmonic balancer was spinning on the crank, how can your power steering/ac/etc even be driven? Dont think thats it man. I think more likely just the rubber is worn.

[@ichista]

He really don't know about cars been shown a mil times

[@FerdinandReisch]

@@ichista Wasnt trying to talk him down, was honestly thinking I might have overlooked something. But I guess in those moments, you can jump to the worst conclusion. Either that or its all for the KZbin click bait :(

[@GTRGarageJapan]

PT (Japan) = BSPT (UK). Whenever I need adapters for going from NPT -> PT I just look for BSPT

[@Oyabun2009]

GTR is having a tantrum since Ichigo is with the family

[@hunterseijas5674]

(READ) I had a problem using a timing light on my SR. Using the loop in my wiring specialities harness gave me false timing readings. Using a GM 5.3 spark plug wire between my coil and plug gave true readings. Maybe try something similar to that.

[@Ballard_Farms]

Time to RB30 swap the 33.4

[@Matt_Lanzer_13]

Will Ballard YES

[@alexhawkins7294]

Ignition scatter will be the cas drive in the cam worn had it lots of times

[@Exitwounds666]

The rubber on the balancer is worn and spinning i reckon. But could be the keyway. Hope its just a simple fix. That intro is 🔥🔥🔥 Keep it as your intro bro!

[@emanh4keem_san420]

Sammit is actually Australian El Zed livin' in Japan

[@jjward17]

Love the start

[@pet0008]

Hey Sammit, Those timing loops provided by nissan are dodgy as all hell. I always use a spark lead attachment to cylinder 1, its a much more accurate timing reading. (Have seen up to 5 degrees difference) Hope this helps!

[@robertpeat7093]

I had the same issue you have and I thought it was the keyway that had slipped in the balancer turned out the cambelt had slipped, you will no doubt be having the balancer off and that will find out if the keyway has broken, if not delve a little further and make sure the timing marks all line up

[@metalheadzac9119]

Best intro EVER! Also facial hair looking good 👌🏻

[@Matt_Lanzer_13]

That ooh ah intro was awesome! And love the mug!

[@marcocarboni1373]

Sammit's back 🦀 💪🏻 I hope it's only the rubber of the harmonic balancer bro. Nice intro 😁

[@Carls_World]

Bro that intro with the song was badass!

[@ChinzoPhoto]

dont use the loop on the harness for timing. It tends to give off the wrong numbers. Run the lead directly to the number 1 cylinder.

[@juanyoi87]

Hope everything goes well

[@jeffparisek2308]

Keep ur head up..things will get better 👍

[@TheChrisey]

You don't need to replace the crank simply because of a broken key. If the crank was slightly damaged, it can be machined easily

[@BassManBobBassCovers]

9:32 LOL Also hoping that the keyway didn't fail. Seems like it would cause other accessory drive belt issues too tho. Worst case scenario the content would be great seeing your documentation and explanation of an RB swap. FEEL BETTER MAY!

[@battlegeek8118]

that intro was the epic, I just lifted the head on my 25 to many psi's on the dyno forged build time...

[@joshdobson2737]

Sorry about your luck hopefully you caught this issue in time...... At least you have an S15 that's Purdy kewl! ;)

[@s13Marino]

Sam, your problem may be due to a worn cam angle sensor gear. I just fixed this on my 26, nissan didnt mount the cas straight on early rbs, so the gear inside gets chewed up over time and causes timing to wonder. The fix involves a new cam cas gear, new cas, and re centering the oem bracket. You can also upgrade to aftermarket cam triggers since you have a link ecu which would be alot easier. I tagged you on my ig pic where i go into more detail.

[@Polarperl2000]

The best sammit intro ever

[@luislora2544]

THAT INTRO WAS SICK!!

[@rustywrench500]

If you put on some shades you'll look like Adam lz, the moustache looks exactly the same.

[@eoinnova]

He wants to be him

[@Zach-ju5vi]

He should dress up as lz for Halloween next year lol.

[@richardc6884]

Try a new cas first. They can and do fail. As others suggested if the keyway for the balancer is gone you’d have no power steering and no alternator. If it is the keyway they can be repaired (even with engine in and crank in) by someone familiar with them. Basically remove the broken bits, repair crank snout (if needed) and put in a new keyway. Good idea to put a new balancer on too.

[@nathanhewitt3920]

I was literally waiting for that song to kick in 😎 sick intro 👌

[@CastrolSupra12]

Yo that intro was everything lol

[@2ksleek430]

that intro tho!!!! loved the vibes

[@Volkswagenplanet]

If it starts with" B " its for me ( BOSCH)

[@ASCARIforyou]

sickest intro on YT period, change my mind

[@FixxxerKH202]

FYI japanese use their own manufacturing standards which are J.I.S. some are direct copies of American, European, or DIN standards but they have a few oddballs thrown in the mix with some stuff, hence your pipe thread which should be a BPT or british pipe thread.

[@petequinones3454]

Put an ati super dampener if you're going to go through all the trouble of taking it apart.

[@gorillahunter]

Hang in there man. Can’t rain every day. And there’s always light at the end of the tunnel. And right now, you going through a tunnel...not a cave. So there’s always a way out at the other end.

[@TheLegoxD]

3:43 i didnt even knew that there are so many different threats :o

[@viktorvik4968]

might have been the best intro on your chanel so far!

[@EVAASIVEOne]

Fire video Sam!!!!!

[@burkielol]

that tokyo drift vibe,i had goosebumps!

[@Michael-jq5pf]

After waiting and lusting for 15+ years, I finally own a skyline. '92 GTS-t. It will be on a boat headed to my location sometime in the next week. I cannot f***in wait! So I'm subbed now, looking for some inspiration for a few modest tasteful mods :-) P.s. thank God you clarified the coffee mug situation lol

[@clutchkickpj693]

If you like rbs then check out my channel and congrats on the new car

[@SR20DEV8]

Mannn.. That sux with R34 .. Hope everything goes good. Good luck with the fix. Hope your wifey feels better too. ✌

[@mrred123]

Good Open 🇺🇸 Bad Ending 😞

[@AaronBonBarron]

If that's the original harmonic balancer, it's most likely just worn out or split rubber. Very very common in cars of this age.

[@driftking062]

Man, ur channel is so inspiring..🔥

[@juandiegomayorga8685]

You got this!!

[@derpy8915]

Time for an rb26 then

[@SideKickNz]

I use a Genuine Tomei FPR,It's NPT.. Well that's what fittings i used on it anyway 🤷‍♂️

[@jezzasmokin1802]

Intro for the win you know that’s how we’d all feel getting the r33.4

[@sherwinaaron7512]

Love the startin sammit

[@TaC0FuCkerx]

Now you've got me worried about my harmonic balancer.

[@OneArmedDrifter]

Sucks man, but the comeback will be sweet keep your head up!!

[@RUPEEEEEEEEE]

sam 9/10 would like to see you driving

[@samuelwoods2851]

Let's hope it's nothing too bad.....😥

[@daltonbedore8396]

a 33 with a 34 front looks absolutely hideous... never knew til now so thanks for that

[@visitiing]

9:31 whats the song?

[@jonjames8648]

Best intro ever

[@alemanski]

love the song in the intro

[@5iibee]

Best intro ever!!

[@cadelcadman2795]

I bet you hum that song every time that happens at the beginning 🤣🤣🤣🙌

[@flash_driv713]

That intro = direct like 💯👍🏻

[@tarawoods9475]

The rubber in the balancer sounds like it is warn and just old. Do you feel the engine wobble a little when sending it. Just sounds like you need a new balancer and you should be good.

[@Rotard-mb5ys]

Its not been driven as much recently. Its been cold. Rubber gets weak! Fingers crossed 💔

[@gokhanamic.j.4272]

Nice Tokyo drift intro! Awesomeness

[@sly_nz9521]

sup sam ino how you feel having problems with my skyline at the moment aswell hope you get it sorted soon, quick question how much for a manuel conversion for a r33 25de over there? an how much would it all b to get it sent to new zealand?

[@clutchkickpj693]

Rb25 big gearboxes are expensive and cost even more to ship out. There are tons of rbs in new Zealand so you're better off sourcing that swap there tbh

[@joelmoreno8010]

LOVE the introoo😂😂

[@addicted2fuel245]

If the keyway broke you would be having charging issues as well as power steering issues and the car would be sputtering and spitting at higher rpm. The rubber is probably dry rotted and on its way out. Easy fix with a new balancer

[@aussielife2201]

That intro was absolutely dynamite

[@BOOT]

If it was moving enough to notice in the accessories, you'd prob next notice a hole in your hood. Basically it's just slipping a tiny bit here n there. If it''s the elastomer then maybe when it's hottest cause dampening creates heat. If on the crank it could move and then friction weld. Still I'm no dampener expert, GL hope it's just the elastomer and you can install a new one.

[@memoryhunter2084]

THE INTROOO

[@lorencecheung]

Ok, that intro was amazing 😂

[@speedyblacksheriff]

I’m prayin man 🙏🏻

[@Barnz1980]

Yo Sam, when I had the crank keyway go on my car it was a huge lose in power instantly. There's a video on my channel "B6t keyway play" where I have the timing belt etc off except the crank pulley & move the pulley by hand showing how worn it it. Hope it's just the harmonic balancer dude 👌 👍

[@Hickman260]

Anybody know where I can get the cable he has in the box at 1:40 please

[@Zach-ju5vi]

I loved the intro, hope you do it again.

[@c4pro155]

Hoping for the best 🤘

[@lukeanderson2182]

For the harmonica balancer

[@shivanharricharan7331]

The stock pulley has a rubber bushing in it and it could be bad.

[@danielmilesan638]

I want a hoodie but on the shop arent any. Why?

[@hayyanmuneeb9333]

probs outa stock

[@SAMMIT]

I can't stock my own clothing yet so I use TeeSpring for clothing merch - teespring.com/stores/sammit

[@Tanner731]

you need a fluid damper harmonic balancer

[@clutchkickpj693]

Fluid or ross tuffbond

[@subiefan9179]

SAMMIT it would be awesome to have a keychain lanyard with the skyline and s15 on it.💯🔥

[@Steve-qr2lm]

Random question, how come your left fender is painted on the inside of the engine bay but the right fender lip in the engine bay is matte colour?

[@ThronedPrince35]

Just drift the s15 without the hood people want to see the yashio spec

[@bmorris5863]

Might be against track rules.

[@ThronedPrince35]

@@bmorris5863 Okay I see,did not think about that ,would be cool to see the s15 in a comp tho

[@rokyle2323]

I'm too drunk to understand up pressure and temperature sensor in one but I want that wire box

[@diffingaround69]

The intro 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🤟👌😍😍🤩

[@SkylineSiRB]

isnt base timing 15deg on RB25?

[@NoblePineapples]

Yoo what are the odds of the song you use playing whilst in the restaurant??

[@tysonc1633]

Rb26 for the win! Or 2.8L the 25 with itb’s And twins.

[@tramaynlucas2552]

Best intro yet

[@EyeCanShootFL]

Fuck that. I am a supporter.. Love the mug! :) And love these vlogs...

[@ericpelky1246]

Npt vs pt is good to know. Saves some people some time. Like these style of vlogs. Like more informational and in depth. ✌👍

[@Fuzion180]

9:40 LOL it's that song!

[@Supradrew]

I really hope you didn’t break the Woodruff key. 🤞🏻

[@Tony-112]

That intro 👌

[@CirbyWeh]

Hand perfectly in focus, once again👍🏻 b-bye

[@RicosHeadLieutenant]

10/10 intro.

[@jbelux]

nice stash bro

[@CreamedRice]

Dat Intro