Bakers Pride Y600 Pizza Oven Thermocouple testing and tips

[@gtjdbydave]

Correction!!! The part number is M1296X

[@zzanatos2001]

I just got a brand new commercial pizza oven a couple days ago. When I was testing it and tried to make a couple pizzas, it kept turning itself off when it got to 650 degrees. I suspected that it might be the thermocouple, but I don't have a voltmeter - so I just looked at it and made sure it was clean and positioned in the center of the pilot flame. I just finished testing it again, and it's working great now. I suspect that the thermocouple might have been moving out of the pilot flame as the oven heated up and everything expanded.

[@itsthepizzaman7434]

Thanks for the video. I have an old Blodgett double deck oven. The pilot light occasionally goes out. Is that due to a faulty thermocouple? Holding down the pilot safety button doesn't always work. A technician said I needed to replace everything from the red button to the pilot light and thermocouple which would cost about $900. Can you explain more about the parts that work together to make that pilot light stay on? Can you make a video explaining how to replace a thermocouple? TIA!

[@gtjdbydave]

Unfortunately since I'm not the tech on the job I can't help you. Old ovens often have obsolete parts and do require conversion kits which aren't cheap. If replacing the parts that your tech recommends fixes the problem, then it'll be money worth spent.

[@NPK476]

Great video! I have a bakers pride deck 151 and can't get the temp about 300F when I normally cook at 600F. When I adjust the temp, the flame reach normal height for about 3 seconds when adjusting the temp and drops down. Any troubleshooting ideas to point me in the right direction would be greatly appreciated. Thanks

[@gtjdbydave]

Sorry, I've never worked on a 151.

[@tonyhaddad9926]

My y600 oven stopped heating up in the middle of dinner,the pilot is still on but no flame? Please help

[@mikesgiant4095]

I have a baker pride pizza oven, they have a high flame and it does not go low, I have to regulate it manually, what could it be?

[@ryankay6941]

Thx

[@briancarlisi2224]

Thanks for sharing. Are you in Canada?

[@gtjdbydave]

I live in the US near the Canadian border

[@amritjotsingh5421]

I have baker pride y600 . Burn pizza on bottom n not cooked on top. I tried everything including adjusting the vents , nothing works. Would you recommend something plz.

[@gtjdbydave]

Unfortunately I'd have to take apart the unit and test it to see what's going on. Best bet is to call out a tech to find the issue for you.

[@dc5k20z]

Use screens

[@coscinojeremy5368]

You have to put the pizza in the exact same spot after you spin if it's burning bottom and your not spinning it might be to high the terms stat inside the oven is not taking the right temp so it's telling the oven it's higher than u have it set so could be cooking at 650 when u have it set at 550 which 650 is a little to high

[@nelsonanderstellezplaza5787]

hola . alguien requiere un bakers y 600