Balance Board balance sensor repair

[@ymaylove]

Awesome video !5:29 That is hall sensor for brushless motor mechanism ,whereas balance control is done by HoverBoard Gyro / Sensor / Balance PCB

[@Order66___]

I love your company and I think its awesome what you are providing your costumers!!!

[@davidcheung3206]

thanks man I haven't tried but I luv how u don't try to sell me the parts and you show us how to do instead of selling us and going for money thanks!

[@Cory229401]

I wonder if you have a method to add battery capacity to the balance board yet? I notice on the opposite side from the battery there appears to be space where another battery could be added in series and possibly extend the range/riding time pretty significantly. Seems plausible that a lead could be run through the pivot of the board. Seems like the extra battery wouldn't adversely affect stability and add just a little weight. Is that something you might be willing to try? If not, could you suggest a battery with the form factor required so I could try it myself please? Helpful video!

[@AAs-hv9xp]

O, x

[@brunoaduarte]

Hi! isn't it possible to repair the gyroscope board ? It's just simple SMD components + MPU6050 Gyroscope + STM32F microcontroller.

[@jdc4316]

Is it the same for a 10 inch swegway?

[@LarizzleDizzle]

Can you send donor parts? I'm looking all over but can't find any, I need the right pad sensor. I have this exact problem you are describing but can fix myself. Please let me know.

[@pierce2393]

Is there a way to control that sensor from some of the pin outs on the sensor board? I’m wanting to use the guts out of one and change the throttle control to a pedal

[@zevak1]

Same here bro I came here for that exact reason, I want to use it to make a rc tank

[@Electronic4081]

The board you pointed out inside the motor is not the tilt sensor! That is the hall sensors for the motor, it tells the motherboard where the motor is in its rotation. The board you replaced is the gyroscope and activation board. It measures the angle of the board.

[@andrebelo9728]

Você sabe onde fica o sensor de inclinação? Tem como desativar

[@ENZZOENZZO]

but me friend havethat 3 days and wehn he do it on he puts his finger to loong and we have the same problem with the light how much costs a new sensor or can he reapr then to buy nothing pls

[@Mlpdashfriends]

i have a problem my board is not self balancing any more i am just getting a blinking red circle i tried to recalibrate 3 times but still getting the red light do you have a suggestion

[@dannyejaz463]

Hi can u help me I have a Segway that works fine but on the left wheel it makes a weird annoying squeaking noise what can I do to fix it

[@yasmynmaccaroni3311]

both sides of my board are not responding. No balance function on either side. What does this mean? Balance sensors on BOTH sides or some other problem?

[@jaydenaponte2369]

Do u think u can fix mine is having the same problem

[@ljongpauco]

what do you suggest is a solution for a creaking noise coming from the middle when tilting or moving?

[@Gamer_Amad]

hey were are you located at? my board been acting up lately the right side looses balance at random times nd often misfunction any help

[@WathanaPrak]

+Aaron Madero We are located in Virginia, and we have a repair shop. You can fill in online repairs at digitallifex.com/repairs. If you have any questions, please feel free to contact us at 804-918-0777 during business hours

[@mrdontplay4855]

These balance scooter are a modern marvel

[@vlpclan487]

will this work if both motors will not turn on?

[@Mjlcarguy456]

Mine did this except the other green light is on too. Is it the same problem?

[@singhchopra7827]

hi where do u think i could buy this from the balance sensor

[@byPuppet]

Hey bro I have a uwheel not the actual uwheel but I have the one that has the LEDs on top and plays music they say it's the "Lamborghini's of hoverboards" we'll both my sensors aren't working :/ how much would it be to send it to you and fix it ?

[@mannyfreshnine54]

I'm having a similar issue my left sensor light is staying on as in this video but my motor still works basically its staying on as if I was on it and when I get off it goes crazy cuz it won't turn off like it should when u get off please help ASAP!!! Thanks

[@jazzmoney4520]

How can we tell what Gen balance board the we have ?

[@reecelazoryk234]

Do you do repairs at your shop because I don't know how to do it even if I did have the part

[@aljunior9872]

Hey im having trouble with the wheel on the side of the battery .. It does work for like 2 min then that one side stops what do u think it can be?

[@sherchanpuran1069]

i bought the sensor tabs from your given link .now i have a problem,my battery light does not turn into red and does not beeps while the battery is running out any suggestion?

[@carlosazteca8441]

Same reparation steps for a 10 inches wheels overboard ???

[@davey2k12]

Yeh the one I got the sensors am on the 2 controller PCBs and the flat edge of the motors mount is facing down but like this issue one motor works if I tilt the controller's it trys to change direction just can't get em both to run need that balance bypass cus I'm converting a mobility scooter nightmare lol

[@taylora069]

If i send my board to be fixed how much will it cost and how long will it take to get fixed

[@franksergi3736]

Do they ship to Australia

[@WathanaPrak]

+frank sergi yes we can

[@Furrysouls]

Hi, hoping someone can help me with our brand new board. It's never been ridden because it won't self balance. When turned on, the green battery light operates, however when you step on the pad, a red light keeps flashing. I've tried resetting it and it does the same and then beeps if you try to ride it. Any suggestions would be greatly appreciated.

[@dangphung8629]

It sounds like one of the cables just got disconnected inside. Mine had the same problem. When I opened it to examine, one cable became disconnected. I reconnected and it worked.

[@chessplay8468]

where is ur shop located, my hoverbourds left wheel not working at all, I tried everythiing. Pls help

[@davidcheung3206]

I fell about 4 times outside (stumble/small crash) and I recalibrated and it's fine but the 4th time the red circle (indication that needs re calibration) kept appearing and if I step on the first pad works but the second doesn't and if I switch same thing HELP!!

[@BoykeWijono]

I got a brand new board from China and I feel that it's too sensitive about going left/right, making it difficult to go straight line. It's quite dangerous when I go a little fast and the board suddenly and slightly turns. I don't think my feet changes position or even if they do, it would be very slightly. (this is why I said too sensitive). I'd love to bring it to your shop but I'm in Singapore :(. Maybe you know what the problem is? I've tried other board and they are not like mine.. will greatly appreciate if you can tell me how to repair/modify this issue.

[@thankyoujesus2836]

Boyke Wijono calibrate it

[@FatCatz2104]

where can you buy the sensor replacement

[@WathanaPrak]

+FatCatz2104 Hi, please visit shop.digitallifex.com for parts

[@harryayala5059]

All my light are on but the scooter doesn't work

[@xxecution3868]

+Harry Ayala I have got the same problem have u fixed it yet and if u have can help me please

[@stephanieolupona3508]

Hi where do I get a sensor replacement from

[@vAlexKJ]

both sides of mine are lighting blue constantly.. cant use the remote is it the censor thats broken?

[@WathanaPrak]

+khantha420 yes both your balance sensors are broken

[@6to9inch]

Hi one of my sensors went bad, i replaced it, everything is normal no stable blue light but now it's going like 10 times faster only on that side can that be fixed?

[@nathanlytle2748]

Thank you for posting this. Hopefully it works. I might try and fix it on my own or send it to you. My problem though is that both of them are like that. Can I order that sensor thing that you replaced on your website?

[@ColinGlenn94]

one side of mine doesn't work at all doesn't light up or respond the other side only lights up when stepped on but doesn't move do you know what the problem may be?

[@harryporter3750]

How do you discharge the hoverboard battery so that when you reconnect the battery leads it does not spark.

[@czy.]

Any ideas how a calibration could disable 1 side, and then after a few more attempts the other side is dead too, seems weird as it wouldnt of been dropped or hit, for the second side to go down?

[@czy.]

and now when i try to recalibrate it, i dont get the flashing red circle, instead it just powers up? help. bricked? bit dodgy how something can brick by use of the on off button!!!

[@unboxviews]

+Mason D Happen the same thing to me while calibrating, people are saying its time to buy a new gyrosope

[@czy.]

1. day. old!

[@Scotth44]

+Mason D mine has just done the very same thing after recalibrating 1 light stays on and right side dead

[@abdulazizismail1192]

+Mason D did you figure out how to fix it ? I'm in the same situation

[@davidthielemans7205]

Wheels are more hard to turn then my 2nd scooter?? are screw tightned to hard??

[@williamlamboy8204]

How can I bring it in to u to fix

[@WathanaPrak]

+William Lamboy We are now accepting online repair orders at digitallifex.com/repairs. Please fill out the form, and we will email you confirmation and instructions to send your board. If you have any questions, please call us during business hours

[@anhdieu]

thanks for share.my problem is two pedal in diffiren position to keep me stand.can u fix it?

[@WathanaPrak]

+Vu Hoang Dieu Anh Hi, we accept online repairs at digitallifex.com/repair - Please fill out form, and we'll send an email confirmation with your order and instructions to send in your repair. If you have additional questions, please call us during normal business hours

[@xxecution3868]

+iRepairMD KZbin can u help me all my boards lights are on but it wont move can u help me please

[@fatmabolukbasi1506]

Hello I have exactlyt the same problem must i buy the LED Sensor or Can i Fix it Otherways!HELP pls !

[@tonilulgjuraj9445]

I have a bluetooth one that is newer, but all the lights are on, like the blue lights are on, and there 2 green lights at the top are on which it only does that if you are on it, but when I try to stand on it, it doesn't balance.

[@noahdavis7282]

Hey im trying to fix my hoverboards right now and all they do are you step on and the red circle comes on whenever you first step on, we have tried calibration and we have opened it up and the red led indicator blinks 9 times, we have look at all the parts and they seem like they are good any help?

[@gihanjayawardana7045]

hey! the problem im having is both the blue lights stay on, on each side. when i turn it on and get on it it doesnt balance nor go forward.. will replacing the sensor do that trick ? it worked fine. but the calibration was off so i reseted it like 3 times. and then boom it doesnt work anymore. i hope u reply

[@ch3ckwillout]

My board is completely unresponsive now to anything all it dose is light up now and the left side which was the side I was having the issue with the flashing red light now it's flashing just the led light on the left side is flashing consistently at this point i don't know what's going on now ...

[@CarlosOrtiz-ok5jn]

Nice video but the links to buy the pieces of the Board do not exist

[@coltonquintero8861]

On my board, I have a similar problem. When I lean forward quickly the board completely shuts off. I can only get it to turn back on with the charger. How can I send it to be fixed? What do you think is wrong and how much would I expect to pay for a fix?

[@ricardozamudio43]

how could I fix my swegway one well spins good and the other well doesn't spin at all

[@hsuarez954]

mine has the green circle on and a side unresponsive will changing the balance sensor fix my problem. PLEASE HELP!

[@buckyboone1463]

where's your shop located

[@WathanaPrak]

+bucky boone Richmond, VA

[@Elkmonger]

I notice all the repair videos are boards with a main circuit board and two balance boards. I have the cheap board with just two boards. is there any repair for these boards? Can I upgrade my balance board with your kit? The sticker on the bottom of the board says Chic. The front of the board says Zipcraft. Its a cheap board all plastic. It only worked for 14 days.

[@ReyTabuyo]

I bought a new motherboard and two balance sensors, but when I turn my board on and try to ride it, its shakes. What do I need to do to fix it?

[@WathanaPrak]

+liltabuyo your sensors needs to be adjusted please call the store for instructions

[@thomasfrench4241]

Hold the power button for 10 seconds then you will see both lights blink but make sure you have all the board level before you do so and let it sit there for 3 minutes and then power off then it should be fine

[@smartbutstupied]

I think my battery pack is shot in my smart balance wheel, do you think I could send it to guys for repair?

[@WathanaPrak]

+Cory Kozminski Hi, if you are certain the battery is defective, we have the battery available at shop.digitallifex.com. Please refer to your balance board manual to ensure the voltage for the battery specs match the replacement battery at shop.digitallifex.com. If you have any questions, please feel free to call us at the shop during normal business hours

[@abdulfanous1486]

Hello I need help so my light is just like the one you have in your first video but both lights are on like that so I took it apart like your video say and removed everything but it's still not working and then there is a red light flashing on the inside of it after I took it apart any help??

[@unicornloverforever7]

Hello, can you guys repair any balance wheel from any company?

[@zayakhanishan6648]

both my lights are solid blue. this happened after i tried to calibrate it. i think i put it in a weird mode. anyway out of this. I'm in california. my board was working fine before the calibrate attempt....please help

[@kirstyeggett1129]

Hi don't know if u can help. My scooters been having problems I ride it and its fine for a couple of minutes then all of a sudden red light comes on and the scooter tilts back and flings u off. Any idea what the problem is. Can any 1 help Thanks

[@dudestamusic2423]

My hoverboard turns on both on green but when I go on it it would not move whys that reply ASAP pls

[@tyfulmer5659]

Hi, again, my balance scooter suddenly turned off without any warning and it won't turn on. Could we send it over to you? I think that maybe there's a blown fuse somewhere. But I'm not sure, so thanks in advance sir (:

[@WoitzyFxck]

Hello I have exactly the same problem, but I'm not as good as you by fixing things so do you guys actually fix it yourself if I send you my board? I'm french by the way. Reply to this comment and give me your price please

[@jdc4316]

Yes. Go to their website link in the description

[@alijawadmolu5608]

Hey. I'm having the same problem with my hoverboard, but this is on the opposite sensor and not on the side that you are fixing. I have tried looking for a spare part for the other side as they are minor differences in the wiring. If there is anyone with any suggestions or links, I will defiantly appreciate it.

[@OfficialDameanabarz]

the issue that im having is one of my wheels dos a jerking motion and wont move forward. very similar to this video in the link... is there a fix for this videos here "Broken monorover2/ smart balancing scooter""

[@rumabd7422]

Hope you are having a nice day. When make power on, both sides blue led lights come on and they stay on. It doesn't move at all. Can you tell me, what is the solution? Eagerly waiting for your Valuable Feedback.

[@WathanaPrak]

+RUMA BD you'll need two balance sensor shop.digitallifex.com/products

[@bobbyfrett464]

so i have the bluetooth version that looks nothing to this hoverboard its slightly bigger but anyways can anyone help me the hoverboard doesn't turn or rotate in a 360 motion to the left but it rotates right so everytime i meet a left turn i can't turn because the right side won't allow me to turn.

[@souldestroyer12100]

My scooter's left pad isn't working. It doesn't move, only the right side one is functioning. Not sure what's going on, when it's turned on, it beeps every second and it shows a red light like the video displayed. Any fix or suggestion for the left pressure sensor, it's not detecting weight, light isn't turned on or anything. Please help!

[@RoscoeDaMule]

where can you buy the replacement part?

[@WathanaPrak]

+FaZe Bong Replacement parts can be found at shop.digitallifex.com

[@crazy_death7863]

can u make a video of how to fix wheel of hoverboard pls...

[@datways12]

How much to fix?

[@ThankGodUchendu-kf9zz]

My overboard also do show one light if you turn it on

[@bgmgrudeboi30]

Droped in water how can I fix

[@alirfc3real950]

mines is working all sides but one side stays on before i get off?

[@adhamomran3291]

The LED light in one wheel was cut off, so when i open it to fix i heard a buzz sound and stop working, and when i open the power i can not close it unless i remove the battery socket can any body help?

[@nicolasntp]

My left pad doesn't work but the right one is functioning well and when it's turned on, it beeps every second. What does it mean?

[@annettedartois612]

Hi there my board turns on it has one steady light on the on/off side of board but it will not move at all help please motors do not run at all

[@WathanaPrak]

+Annette Dartois looks like you have one bad sensor board

[@annettedartois612]

+iRepairMD KZbin do you sell these

[@annettedartois612]

+Annette Dartois also would this make both motors not work

[@WathanaPrak]

yes

[@biggdogg35810]

Dude, please help me out! Is there a way to adjust the sensitivity of the motor to the foot pads?

[@ymaylove]

hi! switch to beginner mode!

[@biggdogg35810]

+yaloha, beginner mode?

[@crissantiago4195]

please help me. Both the lights are green and blue but when stand on it nothing happens. What do you think is the porblem? 5 days ago•

[@blasterisk]

Gyro's inside the board are fried. You can replace them for about $25 each

[@blasterisk]

Gyro's inside the board are fried. You can replace them for about $25 each

[@TheBhw1]

Can you fix the Bluetooth board

[@wudragon8192]

Hi Bluetooth is so easy fix

[@shack2113]

don't see any video in how to fix the bluetooth, suddenly one of the hoverboard stop working and now it does not recognize the bluetooth at all, have you experiment such a problem? any videos showing this issues will be appreciated, don't see any at all at this moment.

[@aquasnipezz454]

How do I fix mine one side will come on and the board does a 360 degree turn each side is seperatly and my battery side won't come on plz help

[@jonasghansen549]

This happening whith me ho much do i need to pay for a new sensor

[@achrefnodata7121]

hi, The best info that I have noticed was on Volt daddy (i did a google) I bet its the most useful info on batteries and this kinda things that have found.

[@martinvanwijk1677]

Question: Don't you have to calibrate the new sensor first? You just replace it, and switch on the board? And that's it? I got my board and probably screwed up calibrating it. So I never used it.. yet. If I get a new part I do not want to mess up again, hence my question.

[@WathanaPrak]

+Martin van Wijk you'll need a new logic board if you bricked it

[@drylegs1]

my hoverboard goes in the same direction no matter which way the pads are pushed . What can i do to fix it?

[@kadenjohnson1309]

when ever I turn mine on it starts beeping and won't stop unless I turn it off, also one side doesn't work. Any suggestions?

[@BartusNorbert]

does not turn on hoverboard segway! What is a problem?

[@WhosRizzo5]

when i switch my hoverboard on both the lights turn on and the green sign lights up :( what should i do? and non of the sensors are working the lights just stay on but i cant move

[@xxecution3868]

+Saphire Chyz have u fixed your board because I have got the same problem can u help please??

[@WhosRizzo5]

yes i have fixed it :) you have to buy new sensors

[@neyfry]

I need help please! When i get on top of my board it just turn off! Why? Please

[@naymacc]

once side of my board isnt responding then when I step on it it does but it jerks around

[@lucasgaccione2459]

Does anyone know where I can find a sensor that won't cost me as much as the board itself!

[@ahmedbond5506]

hello!I need your help. In my scooter 1 wheel is not working properly.Whenever i turn on my scooter to drive one wheel stops working after 10 to 15 secs of driving and red light starts to blink.The wheel is on the power button side. please guide me how to fix this

[@njhorseluver3895]

my one wheel doesn't work and that light doesn't turn off what should i do?

[@kdku]

+Madeline Salvadore same, did you fix it?

[@jdc4316]

Same, I think this vid shows you how to fix it

[@njhorseluver3895]

+Habeeb Okhai no i sent it back

[@singhchopra7827]

you hold the on and off button for ten seconds then do the same thing but do it the other way around that probably will fix it

[@unicornloverforever7]

Can you guys repair any balance board from any company?

[@WathanaPrak]

Yes we can

[@kingshah3401]

if i get on my segway the red light next to battery light wont stop beeping and flashing

[@mikeykil5990]

mine turns off even though it has a full charge!! can u please help ! please

[@alfabuan5455]

can someone pls help me?mine's bluetooth isnt being read by my phone it did work for a couple of days suddenly it wont appear on available devices..what do I think is wrong? thank you..