BALE WRAPPING HERBAL LEY AND RED CLOVER SILAGE | This silage is incredible quality!

In this video we get the bale wrapper out to wrap herbal ley and red clover silage and its a BIG job. I hope your ready for some awesome drone footage as well as a chat about why I like red clover and herbal ley silage to feed to cows and young stock over the winter month.
I hope you all really enjoy it.
Follow me on
INSTAGRAM - / baldys_farm
The YETI mug I carry everywhere - amzn.to/3xh6jVU (other sizes available)
My Gear - (If you could use these links it will massively help me out and doesn’t cost you anything!)
Camera - GoPro Hero11 amzn.to/3E0utHZ
Mic - Rhode VideoMic Go 2 amzn.to/3jN7xoX
Mic - Rhode VideoMic Go 2 with Deadcat Windshield - amzn.to/3Ypgl39
Drone - DJI Mini 3 Pro - amzn.to/3lv1pBX
Tripod - Ulanzi - amzn.to/3lwHrH1
Attachments - amzn.to/3xhTAm6
amzn.to/3YCVWY4
Supported by PASTURE TEC - www.pasturetec...
What I wear - Most of my clothing can be found via the Pasture Tec website above!
Coat - Ridgeline Monsoon Coat www.pasturetec...
(Would also recommend the new Ridgeline Frontier Jacket too!) www.pasturetec...

[@Kavanaghfarming]

The bots are breaking because of the lift arm speed with heavy bales. I wouldn’t put a stronger bolt in because if it doesn’t shear there it will shear where the gears are in the center of turn table not a nice Jo’s to replace. How is the tow and fert working out. Great videos

[@darrenflounders7903]

Best farming channel on KZbin by a mile 👍🏼

[@garymadden2656]

Great video James 👌

[@clarebyrne321]

Love watching this i love faming

[@nicklewis1475]

James, have you done a review of the urea sprayer yet and I missed it? Cracking crop you have...

[@magma5440]

Try putting a 10.9 bolt on the wrapper might help

[@richardgray1031]

We had a wrapper like that and it would break every so often on the heavier bales like you say. Only thing we did differently was a stronger bolt.

[@DJC995]

Hi James Nice one Thanks again

[@keithaspin5160]

loved loved loved the video!!!!!!

[@yanan3681]

Got to love a good silage video 😊

[@BC-vg3zf]

Was this one of the fields done with the tow and fert

[@weatherman_za]

Jealous, I do vegetable cropping in South Africa but would love to run equipment like you have and switch to cattle, our one and only heifer, Cola, could do with the company. Loving your content.

[@thomasbray8409]

Would a clamp and forage wagon be cheaper than plastic?

[@warrenmaker798]

Change the number of teeth on one or both of the cogs to get a slightly lower gear. Yes, the heavy bales are the problem. You could use a High Tensile bolt, but then something else might give.

[@dof674]

Some crop! Would you not cart bales up to the yard unwrapped and wrap them at the yard?

[@artur8403]

Hi. Manual says not to put tougher bolt there. Bales should sping freely on table. What does not let them spin is their shape irregularities and softness. Try to tight netwrap and may be add one more layer when baling. In the end of baling try make more flat surface by driving more slowly and add speed to baler. I think simple thing as tighting netwrap will do. Also people tell to slow down lift arm. This has buttons to lift and lower just like 991 BE[R] ? Manual said table max is 30 rpm. Does yours do more? If it does you need to lower oil flow rate. On my machine there is different oil plug on oil control valve for closed center, open center and variable flow oil systems. For some need to change oil plug and adjust overpressure valve

[@joshhall3208]

It breaks the shear bolts I think when you put a bale on and it lands on the black things either side of the bed where the bale sits, if it doesn’t sit inside the bed when it’s spinning like

[@mikesheil9323]

That’s a sheer bolt it’s on all Mchale wrappers it’s a safety feature so you don’t damage the main gears in the bed usually happens with heave bales or I’d you hit bumps in the field when wrapping you can take the middle plate out of the bed and see is the other sheer bolt in there loose or worn just make sure you put in a sheer bolt or else you can do serious damage to you’re wrapper bolt also has to be very tight if there’s any play it will break easily

[@09blackmant1]

I think someone else has mentioned it above, but can you slow down the speed at which the bale is loaded? As it appears to put a lot of strain onto the back roller when it’s loaded.

[@johnbonham8059]

Only asking is ur silage not to dry for wrspping ???

[@valtra151]

hi can you tell me the seed mix on the herbal ley your silaging please currently we have red clover leys but looking for a herbal ley mix we can silage thanks

[@andrewnewson8563]

Interested which GoPro & drone you use please? Apologies if you've already shared.

[@baldysfarm]

Hey Andrew, if you look at the description under the video you will find a list of all the gear I use 👍

[@ciarancoyne8080]

Hi some amount of bales I see you don’t have any crows in your field put a steel bolt in the wrapper

[@patrickaherne3598]

Always better to have more feed than less...

[@jasondavies4887]

I only ever break the shear bolt on heavy silage bales. Never broken one on haylage bales. Decent tedder worth having is 10k, if you're only ma king bales for cattle I wouldn't bother with one

[@joshmccartney8542]

How many cows do have?

[@richardparsons8320]

Slow down the loading speed of arm as it is making chain try to go backwards, plus 10.10 shire bolts good video again

[@johnsheahan7914]

Great video as always keep up the great work and videos mind yourself

[@clarebyrne321]

300 bales

[@garethmutch3538]

Do not have any problem with birds damaging the wrapped bales ? You will be sick carting bales in

[@KyleHamilton-px7oc]

12.9 bolt will sort your problem

[@johnwarwick4105]

Sure will. Till it takes a tooth off the bevel gear! Load it slower

[@Silvermoonhomestead]

Sell all your extra bales and it might help you to buy a couple more cows. Use your excess to your advantage.