Baler rebuild …. Part 2

[@steveminer5293]

You are a master of rebuilds! Jack of all trades! Good work.

[@alme6743]

I love how you said the forklift was one those "california" forklifts that doesnt like to work in the morning, and needs to grab some starbucks first 😂😂😂

[@Asomesauc]

On fire welding and ICWELD video back to back is a good day baby

[@MrRebar15]

*On Fire Welding* Bravo well done,, thank-you sir for taking the time to bring us along. GOD Bless.

[@parkerbirch5286]

No music, thank you. love this video.

[@guygfm4243]

Thanks for taking the time,just love being brought along with the project

[@jeffo881]

nice shot of the saw blade traveling through that heavy wall tube. The thermal image camera is cool as well, thanks for sharing

[@rudyrivera7426]

Great video! I don’t know where you get these jobs?!? But , they get the right guy for the job! Thanks for sharing! Keep up the good work! Happy holidays!!!👌👍

[@zx8401ztv]

So much progress :-D, Now the owner of the baler needs to lubricate it often so it lasts. LOL that's a joke :-D. Business owners never spend money on anything unless they are forced to. You did a great job of refreshing the 90 degree gearing assembly, it sort of reminds me of a vehicle differential.

[@OFW]

That’s almost exactly what it is.

[@Frank-Thoresen]

I always say to my clients that maintenance is always cheaper than repair. Still they don't really get it but complain on the repair costs every time.

[@zx8401ztv]

@@Frank-Thoresen There are people that don't bother to keep there car maintained A silly attitude :-( Checking the vehicle for fluids and a tire pressure check can help. I don't have a car, just a small motorbike, every week end i checked the basics and it never caught me out.

[@JonDingle]

Another fine installment young man. I shall look forward to Part 3 tomorrow.

[@ypaulbrown]

5:14 that day glow green dead blow wacking that seal on the red trans table was mesmerizing.....almost like the Grinch that stole Christmas....

[@alvarogeorgenobregeorge69]

Hi everyone ,Greetings from Brazil ,God bless us all.

[@armandhammer9617]

Right as I was commenting on the square tubing not crushing, you showed the crushed tube lol

[@jackdawg4579]

This is a mammoth effort, interesting how much "mechanic" type work in your videos.

[@raulrubio2862]

I saw that snap on thermal imager and it reminded me of how I buy tools and gadgets that I probably won’t use every day but it’s also the reason why mechanics or welders will never be super rich because we are always buying shit 🤦‍♂️ lol sometimes shit we don’t even need haha

[@R.E.HILL_]

Another very enjoyable video to watch. And in 16:9 ratio.. the best ratio for a good looking man like yourself.. 🙂👍

[@paulhammond7489]

Looking forward to the next part.. (after the holidays)

[@ypaulbrown]

you are truly amazing and very talented Greg...best wishes from Orlando, Paul

[@crbrepairmotorcycles6608]

Fascinating just amazing cool daily job you sure put in a lot of work of this repair

[@augienajera642]

Just a lot of Bad A..!!!! Can't wait for part 3!!!

[@BetaHouseDK]

millwright welder too. God damn your good

[@darrenblattner2508]

I learned a few things but most important is I need to let my beard grow longer, lol. Nice job so far. Keep smilin

[@Cholton222]

California fork lift. Lmao. Bsafe dude

[@scotthultin7769]

51👍's up on fire welding thank you for sharing

[@a-fl-man640]

snap-on only the best. classy.

[@billblogs8206]

That bearing cup will spin in that housing for sure!

[@horstmuller7512]

Yes, it will fail. He should fixed it with loctite.

[@OFW]

What exactly are you talking about?

[@horstmuller7512]

@@OFW At 6:00 the outer race of this bearing should be fixed und not be greased. It will spin and destroy the housing.

[@billblogs8206]

@@OFW At about 4:21 . This is all speculation on my behalf, I'm not the man on the ground and I don't have all the facts but it looked to me like that cup will spin with the cone inside the housing. There didn't look like there was hardly any friction when you put it in so I would have used a bit of 638 or similar to fix it in place. It looks like a super low speed drive anyway so it may never be a real problem like a high speed one would. That sprocket at the end was mint by the way!

[@OFW]

I agree that they should be tight and not move. They were loose coming out and there was no scarring. The manufacturer said it’s supposed to be that way.

[@seantatham9960]

Nice work Greg!!! Hope you had a nice Thanksgiving

[@thomas4844]

There it is. Awesome…

[@JimmyZ408]

Liking that Grease Gun for sure. Every pump grease gun I've ever owned sucked!

[@russellgilson4072]

Very impress skill set!

[@R.A.G81]

Мужик! Возьми меня к себе на работу! Я всё это умею!)))

[@MidwestToolReview]

Not sure if you'd be willing to do this, but I'd love to get a tour of your rig. Looks like you have some neat tools and equipment. Also would be nice to get to know your background, as I'm a new sub and just learning about your channel in the past 24h.

[@OFW]

I am going to do a truck tour video and a how I got to where I am video.

[@MidwestToolReview]

@@OFW that would be awesome!! I definitely watch that vid. Thanks

[@jaymarshall7632]

Thank you for your videos!!

[@yakswelding86]

California forklift doesn't like to work when it's cold. Lmao

[@mikeriveccio1]

sweet! been waiting for this! amazing man!

[@simskii.]

Have you ever repaired a sorting/tree grabs? I work in the production of them, but I can't seem to find any info of them out in the field.

[@OFW]

I have not.

[@AndreZA979]

California forklift, get it some Starbucks 🤣

[@advanceddiesel7766]

California fork lift 🤣🤣

[@johnpope4464]

I've mixed gear oil an grease, it was thick but runny it so it didn't leak

[@Frank-Thoresen]

Very surprised that you couldn't get a sandblasting company to do the frame in California. Was it a too short notice? Most field jobs are short notice anyway. Wirewheel it is in fact just a punishment.

[@waynep343]

Did you attempt to put the sprokets on so the drive on the previous reverse side. Aka the less worn side. Hopefully you took a pattern off them.

[@OFW]

I forgot to explain it but that’s exactly what I did.

[@GARRETT-FAB]

I’m real curious how you approach a bid for job like this, I’m just starting out as a welding business owner. Is this something that you just give a day rate or an hourly price and it takes as long as it takes?

[@OFW]

All by the hour. A job like this would be hard to bid.

[@handmade-everything9528]

Forklift has to warm up It’s from California need to Starbucks or something first.😂😂😂😂 from Sacramento California and that was 100% OnPoint😂😂😂 👌

[@shifty389]

Shocking bro no welding 😂

[@harveystephens6115]

Nice

[@timspicer3270]

😊

[@joseGonzalez-og9pd]

What's that 631 banana doing on this dilemma lol?

[@PhatPhinx]

please for the love of christ only use a brass brush on mating serfaces

[@mikel9666]

🤙🏽🤙🏽🤙🏽👍🏽