Parametric Sliding Door Family in Revit Tutorial

[@thanhquocbaonguyen8379]

you have been the teacher for most of my revit assignment. your sharing knowledge benefits the humanity a lot. cannot thank you enough.

[@9010studio]

Hi Balcan Architect! I started a new job and it turned out that i need to learn really fast how to work with families and create them. Your tutorials are saving my ass :) Greetings from Poland!

[@BradleyFrench]

I've learned Revit in two weeks thanks to you!!!! Keep it up. Doing amazing.

[@nikchetverikov8989]

i am from Russia and I am 12 years old. This tutorial is very nice! It is PERFECT! Thank you very match!

[@ThamiresNunesMarques]

Thank you so much from Brazil! You help me a lot!!

[@nadeem006]

Thank you so much , great tutorial as always, I just wanted to add some extra tweaks to make it Parametric DOUBLE Sliding Door Family and for that we just need to mirror the void extrusions as well as sliding door panel with necessary lock it in place the positions of mirrored ones with additional reference planes, we need to relocate the opening parameter to the middle of Main door opening void and make another opening parameter to opposite side to move both door panels at the same time once change the opening distance as required , most important one we need to make a new parameter of width of main door opening with formula of Width * 2 once created this parameter then main door opening width automatically multiplied by 2 whenever we input single sliding door opening width and now it can be utilized in placing wardrobe opening or walk in wardrobe openings whenever required.

[@julietgeraci1999]

Thank you so much! This was exactly what I was looking for and so happy to have found your tutorial!!!

[@Chanduroyal703]

Great man..just because of you I still working on revit not any other..🙂

[@AussieBIMGuru]

Good little trick a lot of us have been using for a while now - great to share it!

[@majdoviyed2431]

Very useful! i do it in middle of the wall, you are the best professor..Thank you

[@쏘-t8s1x]

you are the best professor..

[@DR.199]

King of revit

[@julihdz1]

Great Video! Thanks

[@wasanalasam7785]

Many thanks Balkan

[@auto-fav8969]

great tutorial

[@stefaniakoleva111]

Great tutorial! Had some fun and added additional reference plane for the opening parameter, so I would have the control handles and be able to pull it directly to a random width that seems good to me in the project. Also I am not sure, but isn't it a good idea to set the model category to a Door in the generic model environment when you start modeling the door? I am not too familiar with schedules but I imagine it would be nice to be able to include it. Thank you and keep up the good work!

[@wahidullahparwanayuqob3910]

Very useful!

[@nghialecao2323]

thank you very much

[@Missjeon99]

Can you make a tutorial on how to make a sliding shoji door?

[@pascastro9928]

This tutorial is the absolute BEST!!! Now I can make my own fcking doors insted of trying with usless families online. THANK YOU BALKAN ARCHITECT!!!!!!!!

[@easyrevitstepbystep4451]

good stuff mate :)

[@safiyaosman1285]

Thank you

[@ting-nachen1735]

Thank you. Great video! Could you please show us how to create a sliding door on a curved wall? Thank you.

[@g.samitha4439]

Good video

[@ulmsullan4274]

hi bro how to create curtain wall sliding door family in revit

[@AussieBIMGuru]

Use the curtain panel family template, then in the family properties (below type properties, icon with a yellow folder) set the subcategory to door. Then model away! Keep in mind unlike doors the curtain panel dimensions are set by the curtain grid

[@deathblade909]

In our field of work we have a particular slider we use . Not pocket . They stack on top of each other but are recessed into wall ceiling and floor . So all you see is glass no frame. How would I go about creating this in Revit ?

[@aerialandlasersurveys9075]

Hi BA, Have been scribing the $15 per month, but could not access all the previous family files, so I also subscribed to the $5 per month as well, now I only have access to the files and cant access the tutorials! Sorry to post this here!

[@Adiamtl]

Hi Why my door is not upright? Sorry I’m new to Revit

[@shazamshabir6788]

Amazing. How can I open a revit 2019 file into a revit 2016? Please help

[@shazamshabir6788]

@@yarasaoud do you know?

[@shazamshabir6788]

@@yarasaoud okay shokran jazilan.

[@hildevarmartins5896]

iT'S IMPOSSIBLE

[@AussieBIMGuru]

You cannot, Revit is not (yet) backwards compatible. The only workflow to get geometry backwards is to export as DWG or IFC, then import as a reference in the lower version

[@danielolivier-cividino580]

Anywhere i can download one already made ?

[@junaidahmed5674]

I have issue spot elevation - when i put spot elevation on slab it show only corner of slab. dont show on center and any wahare of slabe

[@raulmontoya4820]

Hi Mr. Balkan, I copy exactly what you did, all parameters are working but when I load into project it doesn't cut the wall automatically? can you help me pls?

[@Legabis]

We are two friends trying to come up with a way to work on same projects. We live really close to each other, but we both want to work from our own homes for now. So, what we need to do, set up network or something, so we can work on projects simultaneously , so when him or I do something on the project we both see it. What is the best way to do this?

[@gabrielepiacentini9277]

I don't understand why instead of adding reference planes and parameters to both the main family and the nested one you have created so many constraints adding dimensions and locking them. That's not what Revit is all about.

[@tardisblue7144]

Where are you from mr balkan architect?

[@balkanarchitect]

Serbia 🙂

[@tardisblue7144]

@@balkanarchitect ı thought that you are Turkish 😂 Because Balkan is a Turkish word.but anyway you are the best!thank you. Oops.i just check and it's also use in English as Balkan.

[@zakiklamson4409]

Why Revit 2019 and not 2020 for this project ?

[@balkanarchitect]

Just to give people a bit more time to switch to the new version 🙂 I'm going to switch soon

[@zakiklamson4409]

@@balkanarchitect Ahh ok I see ^^ Please pardon my rudeness

[@rchisrv7248]

Great Video ! I made my latest Video About making plans views and elevations with Lumion How do you like it?

[@ghadaa7416]

thank you