If you want to master Topography in Revit, we offer a full Site Design and Coordination Course for Revit. You can find it here: balkanarchitect.com/p/site-design-coordination-in-revit
@aapg5076 жыл бұрын
As an architecture student I can't thank you enough for the time and effort you put in your videos. Thank you so much !
@Superduperond6 жыл бұрын
Thanks! Looks really nice. To save time, demonstrate the "tab trick" while using pick lines or clicking edges for the fascia. When fascia command is active, simply hover over a line or edge and press tab and it will select all joined lines. Then left-click and all the fascia are created at the same time :)
@RubbinRobbin6 жыл бұрын
Thanks didn’t know revit can tab through edges
@yeldaq5 жыл бұрын
am i the only one who got really frustrated because it seems easy when he does but İT İS NOT?!
@Ajaykumar-pq9zy2 жыл бұрын
Mee too. ☺☺☺
@muhammeduvais40222 жыл бұрын
😂 mei hoo na too
@joel218872 жыл бұрын
Rolling in the deep!!!!😛😛😸🦖
@benzonjhermogeno2 жыл бұрын
its actually easy, just practice
@therealkira50672 жыл бұрын
I KNOW RIGHT
@foxyon45232 жыл бұрын
It really worked for me after I look and try some tutorials, yours is the one that worked. Owe you a lot.
@kbbl113 жыл бұрын
dude, you literally saved my life, this is awesome
@genesiscelucia52702 жыл бұрын
Your Revit tutorials helped me get through my semester this year.
@thesnakebite919 ай бұрын
This channel is the best revit educational page ever❤❤
@JackKehoe-n8p11 ай бұрын
This is a perfect video for students. Straight to the point and efficient... while also providing extra insight like how to create the curb component. Thank you so much for this helpful video!
@GabeKLagos6 жыл бұрын
Thank you for making critically useful tutorials! I'm so grateful! I wish you great success in all you do!
@AlexandraEdwards-q7l6 ай бұрын
@balkanarchitect a revision for 2024 version would be great. Excellent video!
@mansourbellahel-hajj53786 жыл бұрын
you know your videos are worth money because it is give us exactly what we want.
@1369legend4 жыл бұрын
this is one of the best tutorials for roads! well done. simple and practical
@richarddaigle87775 жыл бұрын
Perfect man, I am starting a new job and needed to brush up on my revit skills.
@samsam19912 жыл бұрын
Good job you,I tried to medel it;it was difficult at first,but after watching the tutorial again and again,I now began to model it,but the surface splitting and exporting still giving me though time.You are doing a wonderful work
@vasiliibogdan1291 Жыл бұрын
You the only KZbinr I watched 40+ videos
@AussieBIMGuru5 жыл бұрын
Interesting approach, shame about the roof categories having to be used for mass by face but makes sense given the limitations of the software. An alternative approach I'm going to run a tutorial on will be to use dynamo to 'drape' a floor with sub-points onto the topo using Dynamo, cut out the ground below and lower by a set amount to another level and use slab edges for the kerb profile.
@emilianosaenz8543 жыл бұрын
i had to watch 12 videos to finally find this solution!!!! thumbs up!
@dorsanakhaei3 жыл бұрын
I just wanna thank you for your awesome tutorials, they're so helpful!!
@eyoelgetachew6004 Жыл бұрын
big ups bro ur tutorials are really informative and one of the best i have seen
@franjosovina45036 жыл бұрын
ti si čudo! hvala ti jer puno si mi pomogo kod izrade diplomskog! :D
@ivanpandzic81763 жыл бұрын
Thanks for video. Instead roof family, I've used road family. Sidewalk and curbs modeled in place ( sweep) avoiding exporting and importing CAD drawing dwg.
@shy31025 жыл бұрын
I just subscribed to your channel today n watched a few videos of yours. I m a very experienced Autocad 2d user but had just started to learn revit. I just want to compliment you on your video clips n tips on Revit. It is v well produced n the steps n audio instructions are clear. Thank you v much. From Cy Singapore
@CraigHetheringsting4 жыл бұрын
lol ive watched this video for almost every project ive done, you are my savior
@mpumelelozulu62686 ай бұрын
Balkan Architect, you're the GOAT.
@yixuanwang53592 жыл бұрын
the best video of site plan in Revit. thank you so much
@Patrickorwa5 жыл бұрын
I discovered that you don’t have to flatten the site cad from Autocad. Place points at the center of the elevation markers in AutoCAD then import to revit. Add topo surface then import points. At the dialogue box import the layer containing the points that you imported. This will form a surface. If the surface is too high or low , go to elevation and drag it to the light level and voila. You’ll can also align your surface in the x or y in the same way.
@shubhamkarki89396 жыл бұрын
Thanks man. Please never stop making videos. Make it every day. Again thanks for your effort.
@briandlessard4 ай бұрын
This is great! Do you have a video showing how to change the road and sidewalk if the grading has changed?
@crimson51583 жыл бұрын
I was NOT expecting curbs to be this complicated sheesh
@garystahl90675 жыл бұрын
Fast, clear, easy to understand-excellent........
@steamsteam66075 жыл бұрын
Edit subregion. Copy the lines. Starrt the Model line tool. Paste aligned. Use roof fascia with a profile for the curb.
@JavierOropeza086 жыл бұрын
This all makes sense, but I am not sure if this is what someone would do in a production environment? Correct me if I am wrong. It just seems this is good for a rendering if that is what you are using revit for. Don't get me wrong, this was super helpful and very clear!
@lakimsafwan18996 жыл бұрын
sir , u dont have to ask us to like this video . obviously we'll like your video . because all your is too good and perfect
@robalderman69793 жыл бұрын
The last thing we need is architects doing site design
@zhangliao1615 жыл бұрын
roof + fascia for landscape, brilliant !!
@rawkrXbabee3 жыл бұрын
you're saving my home reno assignment- Thank you!!
@inayir9696 жыл бұрын
Exactly what I needed at exactly the right time! I love your video's! Keep it up!
@GentleGiant0555 жыл бұрын
YOU ARE THE REASON I AM PASSING MY THIRD YEAR WITH A HIGH GRADE. THANK YOU SM
@viratmanchanda75163 жыл бұрын
Fantastic workaround to create BIM objects for topography. Thank you so much!!!
@tanveer1016 жыл бұрын
Very detailed and awesome videos bro, yours is the first channel I subscribed..thanks a lot and keep helping!
@polyticalaanalysis97863 жыл бұрын
thanks for your supports
@raphusnet10316 жыл бұрын
we need to support this channel better. please share videos if you can and advice this channel to your friends.
@sam90o483 жыл бұрын
love you bro, u gave me an idea to create walls following the topography with this method without dynamo
@argyroelectro5 жыл бұрын
They way you explain is quite good. I couldn't follow you on the sidewalk AutoCad creation and import.
@willievodka05055 жыл бұрын
why i never found this channel before would have helped me alot.
@ridwanarifinarchitect6 жыл бұрын
my best lecture of revit
@mouniibr36962 жыл бұрын
You really helped me out! Thank you for your tutorials!!
@melaniehunt99785 жыл бұрын
this looks really awesome - i look forward to digging into revit for civil works for looks
@mohammedourdan797911 ай бұрын
Thank you brother for this tutorial , can you make a video like this for the topo solid new update .
@bolilino81612 жыл бұрын
Thank you for explaining this thoroughly!
@angelajxne2 жыл бұрын
Thank you Sir! TNice tutorials helps alot !
@Naxioan6 жыл бұрын
Fantastic and super clear tutorial and walkthrough! Thanks so much!
@VersusARCH Жыл бұрын
Roads for the most part do not just follow the natural gradient. They have their own gradient which cuts into the higher terrain (with escarpment gradient of 1:1 or vertical if retained by a wall) or is mass filled over the lower terrain (with escarpment gradient of 1:1.5 or vertical if retained by a wall). Longitudinal gradient of the road is 1:10 max and lateral about 2% max if memory serves except in high speed curves. What you made there looks nice but is incorrect from a technical point of view. It would have been more pronounced had you created a steeper gradient terrain.
@sajadkheirkhah51162 жыл бұрын
Thanks so much for making tNice tutorials video! You really broke it down well.
@prettyboychuks3368 Жыл бұрын
your videos are good and help me learn
@hafils6 жыл бұрын
Superb and well explained... In your video length 9:09, you said 2.2 meter (incl in subtitle), But actually you have typed 0.2m only... However fantastic work.... really useful...Do you have any videos for Irrigation piping / valve / sprinkler / drip tube etc..?
@mekiasmessele58135 жыл бұрын
great video! But i think its easier to do the curbs with railing instead of fascia
@nelsonianb12893 жыл бұрын
Thanks for this, very helpful, one would think a $3k a month software to have this built in.
@aungkha58689 ай бұрын
creating the curb is like fking magic
@kundisrecto93894 жыл бұрын
This tutorial help a lot to us... Thank You Bro and God Bless... Perfect!!!
@isidrolopesdasilvaneto88262 жыл бұрын
Perfect! Congrats!
@isidrolopesdasilvaneto88262 жыл бұрын
With respect to BIM, isn't it strange to use a roof to model the sidewalk and curb? Would there be another family to accomplish that?
@rohanthe1234566 жыл бұрын
hey man really get videos have learnt a lot of basics for revit... A request...please also make a tutorial on using the site designer plug in.
@exarch001 Жыл бұрын
Thanks for sharing this ! Very interesting 👏👏👏👏
@TATBIM Жыл бұрын
Nice approach
@sanusihadi98403 жыл бұрын
you re the man bro
@architectureaaron73734 жыл бұрын
Great video!
@salmaelkhateeb14136 жыл бұрын
you have read my mind i was gonna ask you to do that; thank you so much!
@sharchitecture87614 жыл бұрын
You're an amazing teacher, dude. Thank you!
@joburgecomm3 жыл бұрын
I really needed this. Thanks
@joudreyalat84624 жыл бұрын
Thank you so much you saved my life 🤩
@silviasouza44865 жыл бұрын
nice job man, thanks for uploading! Keep up the good work
@reemhalabi5472 жыл бұрын
Thanks so much for all of your tutorials, But i am facing a problem that the layout when t insert the plan back from AutoCAD is changed, please feed me back.
@slug1826 жыл бұрын
Thanks so much for this! It came at just the right time! Could you make a profound tutorial about railings?
@RevitShreef5 жыл бұрын
good job keep going but you can draw the curbstone using rail and activate bottom rail and the host level is the road and profile of rail is the same profile you make it in this video I wish this option helps you thanks again
@ankeettagde5 жыл бұрын
Wonder full work ! you made revit easy !
@aparnawadekar19854 жыл бұрын
Thankyou For Solving this problem ..
@barzmba26493 жыл бұрын
Perfect video. Thank you very much
@leenshammout94242 жыл бұрын
This helped a lot thank you
@188rockarin3 жыл бұрын
Good work around, but the category is roof? Isint there a more suitible category for roads, curbs, sidewalks? Love youre videos btw :)
@vincentbruneau77536 жыл бұрын
Excellent ! exactly what i needed
@pandarzzz5 жыл бұрын
Thank you for sharing this informative video... Site Plan is made easy, thanks to you...!!
@ulrixen6 жыл бұрын
Nice stuff! Exellent learning for me!
@agentcarbunkle5 жыл бұрын
theres an autodesk plug in called site designer for revit, i havent tried it but it looks like it can create roads and also terraform topography to suit them
@nishadimuhandiram51436 жыл бұрын
waaaw it's nice one.u did that i need.thank u
@tanyaaggarwal98536 жыл бұрын
THE EXACT THING I NEEDED! REALLY HELPFUL!
@eafc1910794 жыл бұрын
Greetings from Colombia, !!!good video
@newmexicodrivers38576 жыл бұрын
Very helpful and useful videos. Thank you.
@essentializeall4003 Жыл бұрын
Thank u for share ur knowledge.
@NuvemAnjo4 жыл бұрын
This is a very helpful tutorial, thanks!!
@yuriykabanets76653 жыл бұрын
Great Stuff! Thank You!
@gregorysimmons61613 жыл бұрын
Great video...thanks for sharing
@promilagagan79395 жыл бұрын
thanku so much for your videos i learn alot ,thums up.
@michaeldowling6774 жыл бұрын
Great video, quick question, how do you remove all the lines on the path to make look smooth and also join the pieces of kerb again to look smooth
@AlejandroLopez-ps7rt4 жыл бұрын
have this same question!!
@ytada42744 жыл бұрын
I have the same, too!!
@MrCassett2 жыл бұрын
@@ytada4274 Same question, did you guys found a solution?
@arthurfarrow15896 жыл бұрын
Very nice video on working with site elements. Just what I was looking for. I'm actually a structural engineer doing Arch Revit stuff for my home. Want to get a permit for some work and am getting the Revit bug. Thanks kindly. Arthur
@oykug.72842 жыл бұрын
hey it's really awesome thanks a lot
@ranjithramankulangara58304 жыл бұрын
Thank you so much. Your vedios are so helpful.Could you please give a tutorial for preparing excavation and blinding drawing in revit
@teresarotondo49693 жыл бұрын
Hi, Thanks. It's great. Why do you create the pad?