Parametric Curtain Wall Window that Opens Family in Revit Tutorial

[@FlavioCav_Studio3D]

Sensacional. E já se passaram tantos anos e este tutorial ainda é muito relevante.

[@jordimarino6618]

Why this tutorial does not get more likes? Thank you so much.

[@mohammedriswan7676]

Awesome tutorial🎉🎉

[@mintgirl3290]

Thank you so much. I love it. It will help me to increase my model realistic sense in Revit.

[@nocturno.nocturno]

Could you please make a video explaining how to organize projects?? For example, when you have a project with dimension plans, mechanical plans, electrical plan, plumbing plan, etc.

[@scra3018]

thanks so much, just what i needed to improve my design :)

[@aabiabi5364]

Great work..👍🏻

[@mundiangenda6533]

When I enter the formula, an error message says “ a reporting parameter can be used in a formula only if it’s dimension references are all to host elements in the family”. How do I fix that?

[@sidkxjIzxnLk]

same, were you able to make it?

[@maurohgomez4514]

@@sidkxjIzxnLk the same issue I got. Did someone sort it??

[@laurenunger1715]

@@maurohgomez4514 I found that this worked for me. This was from Autodesk Forum - Reporting parameter to be used in FORMULAS. "The solution I found was that I placed the dimension to a reference plane and then to the reference level 0 line (Black) instead of the reference plane line (Green). I used tab to select the green underlying reference plane and it worked."

[@imranizzani8990]

Thankyou from malaysia 🙋🏻‍♂️

[@avinashkr7225]

Superb needful video

[@enggrp123456]

Hi; Good Tutorial; Please Note to modify the hing point to be on the Exterior face of the Curtain wall; That's How it should be; Otherwise it would not open in the reality; "GOOD LUCK".

[@Ahlotski]

Thanks for this tutorial it helps us a lot.

[@bbkorp]

Good, very pedagogical

[@DanielKavalera]

thank you 🙏

[@rehanmulla8716]

Hi Good Tutorial, but In my case when I was giving parameter for Panel height which is ( height - 100 ) is not applying coming error " A Reporting parameter can be used in a formula only if its dimension references are all to host elements in the family" I tried twice & followed the same method as you. but this error was coming . Do u have any Idea why ??

[@CharlesDickens99]

Same thing happened to me. Did you find a solution to this?

[@kinamaenikrossen3759]

@@CharlesDickens99 When measuring "height" you need to when selecting the bottom part, so that you choose the reference plane instead of the reference level. Solved it in my case :)

[@markezzat997]

@@kinamaenikrossen3759 THANK YOUUUU, i was so upset and frustrated by this error :)))

[@raoufberarma9740]

@@kinamaenikrossen3759 thanks bro

[@DaphneGsell]

I was running into the same issue

[@juniacosta1729]

Nice tutorial, thnks!

[@jaleelraihan5772]

very good sir.thank u very much

[@lahiruindrachapa7780]

I got an error “ A reporting parameter can be used in a formula only if it’s dimension references are all to host elements in the family.” When merging in the family type. What is this?

[@bengramos9305]

I have the same message.

[@evanleearchitect]

@@bengramos9305 Ditto

[@bengramos9305]

@@evanleearchitect need to pick the correct line. Press tab. When doing the height dimension

[@evanleearchitect]

@@bengramos9305 Thanks. I'll try that. To get the job done I just did the frame family at the size I needed & then modeled in place the louvres. Got me out of a whole but asap I'll make a parametric family for the future which is my preference. Thanks again.

[@melekboke]

@@evanleearchitect THANK YOU! That was the trick.

[@dedohuu5263]

thanks for your video.

[@Shubham3dstudio]

Superb amazing 👌👌

[@samankapugamamarachchi6359]

Ballkon I have tried to do this exercise but having this warning I couldn't "A reporting parameter can be used in a formula only if its dimension reference s are all to host elements in the family. so let me help to find my mistake

[@DonbeE61]

great tutorial

[@นันสุขสุข]

Thank you.

[@arafaohad6368]

thank you

[@L2022-e1m]

I love revit v much ... it is n. 1 with v_ ray ☺😊

[@rksudera]

Dear Sir....the "Height -100 for panel height" in formula is not accepted by revit with the message - "reporting parameter can be used in a formula if its dimension references are all to host elements in family" please advise. I am using 2020 version

[@jeffreyotoo9296]

I am having the same problem too am using 2021

[@josemedelmilitante5085]

Same reason

[@supercheekykiwi]

This is a great tutorial... But it still boggles my mind that you have to go to this length for a simple opening panel. I'm from archicad and this type of thing would be included in libraries.

[@sawsweettunsweet]

An error message occur, while enter the formula, says' a reporting parameter can be used in a formula only if it's dimension references are all to host elements in the family'.How do I fix that?

[@huynhat6323]

thank a lot

[@jesusmar9181]

keep getting this error when I do the formula in family types " a reporting parameter can be used in a formula only if its dimensions references are all to host elements in the family" what can I do??

[@spawntein7733]

You are selecting the line of the level grid at the moment of creating the dimension height, you need to hit tab to place the dimension on the reference plane below it

[@GustavoHenrique-bw9yw]

@@spawntein7733 Thanks!!

[@cindyqty]

@@spawntein7733 thankkssss💞 I've rewatched the video twice thinking i was doing sthg wrong 🤦🏽‍♀️

[@taimursohail1723]

@@spawntein7733 thanks bro just because of u I am able to create this family. Once again thanks

[@barretthigginbotham4665]

@@spawntein7733 Thank you so much, I hate when running into a single issue renders the whole tutorial useless.

[@vinodbhaskar2415]

Good information. .

[@nelsonlee3827]

Great, if i want to use extrusion and how to make corner junction in 45 degree

[@josemedelmilitante5085]

While following your instructions and after the entry for height formula and clicking apply and OK it is not working, please give me some tips to fix it. Thanks

[@taimursohail1723]

Plz sir I have problem when creat this family ( a reporting parameter can be used in a formula only if it's dimension references are all to host elements in the family)

[@barretthigginbotham4665]

I had the same problem.

[@asoodmuhammad6045]

When measuring "height" you need to when selecting the bottom part, so that you choose the reference plane instead of the reference level

[@asoodmuhammad6045]

@@barretthigginbotham4665 When measuring "height" you need to when selecting the bottom part, so that you choose the reference plane instead of the reference level

[@ekuhnps]

Thanksss

[@catherinelai6683]

Hi, why my reference line in 3D view is not shown at the center of the window frame? It showed at the left. Help me out please.

[@TheeRyanFreund]

Did you ever figure out how to move this?

[@phillyguy199]

You have to click on it and use "edit work plane" command. There should be a center option. Good luck!

[@melekboke]

@@phillyguy199THANK YOU!

[@gireshpt1]

Awasome

is there a way to change multiply window instead of having to do it manual on every window??

[@barretthigginbotham4665]

When i make the reference line for the opening panel, it is not centered, it is at the endpoint of width dimension. This prevents me from creating an equal distant glass panel at the end. This is now my third roadblock with this tutorial and 1.5 hours working to create this single window panel. Really hating revit rightnow.

[@lukenichols92]

I got the same error as many other people (a reporting parameter can be used in a formula only if its dimension...) Any suggestions?

[@yasararabath3450]

I'm getting the same issue while creating

[@classicreview5546]

@@yasararabath3450 me too getting the same problem. what to do?

[@ahmedezzel-deen4295]

@Gilson Oliveira thanks a lot for help

[@yolostylenl1034]

Hey Balkan, looking at this video it also possible to make this with a window family right?

[@vincentburkitt1517]

Its easier because you don't need the reporting parameters

[@ganeshkumarkandula]

very good work, plss make a viedo on how to draw different stair cases.

[@DanielMartinez-ck3yy]

the small point of the reference line does not appear to me when using align

[@abhayshirodkar3780]

Can you tell how can i add an angle parameter to already existing family?

[@benabedmhamed2360]

Good

[@mohammedobeid3997]

thank you

[@fabboll5732]

Perfect Video! Thanks! I build it in Revit for a Roof (almost similar to a curtain wall). But I got the problem, that it opens only to the inside of the roof; downwards. Do you have a hint how to turn it inside out?

[@petercarfoot7089]

Good day, have you or do you know how to create and elliptical pitch roof. Revit will allow you to create a round roof but will not allow you to add a slop angel to an elliptical curve when using the roof tool. can you help me?

[@mansourbellahel-hajj5378]

Can somebody help I am applying my curtain panel and it is not loading can anyone help me

[@ajayanraju]

how to solve if a reporter parameter can be used in the formula only if dimension references are all to host elements in the family and its doesn't work and always rejected?

[@imranemmu]

Iam having error while changing height in family types

[@phillyguy199]

This was a really tough project. I got all the way to the end only to have a busted window :-( I mean, it looks just like yours but it won't open or close. Postscript: I got it to work! I had to re-configure most of the parameters but my window now adjusts in the model.

[@aritraasengupta8620]

Reporting parameter is not working for me , can anyone help me with this

[@jainpaul1]

How to change the color for curtain walls

[@CharlesDickens99]

Under Family types parameters, all my dimensions are greyed out. This happens when Balkan architect goes into Family types at 8.09 And when dimensions are greyed out you cannot enter any input to alter them. You can alter dimensions by dragging reference planes in Revit which only partially works; dimensions which are linked by formulas update but the rotation point does not move. Is anyone else having problems like this?

[@natashathestallion7971]

yes i am

[@ekeminiclementessien2282]

Not openness, but opening in that context, good video

[@jeffetienne8003]

"a reporting parameter can be used in a formula only if its dimension references are all host elements in the family" this is the message I had when trying to enter the formula. Can someone help please

[@danielpinho5635]

hi there jeff. I had the same problem. When you are making the height dimension you need to hit tab one time so it chooses the reference plane over the reference level. Then it allows you to enter the formula. Hope this works for you.

[@jeffetienne8003]

Daniel Pinho ok I'll try tomorrow and I let you know how it goes

[@jeffetienne8003]

Thnx it work properly now

[@jeffetienne8003]

Hello, you have to pick the reference line instead of the level by clicking tab when you at the bottom, for the height dimension

[@muhammetmustafayavuz3136]

@@danielpinho5635 I have spent a lot of time to solve this problem. Thanks a lot for your help :)

[@hamidmohsenzadeh2354]

firstly thanks for your videos and tutorials. But I have a problem. I am using the 2019 version of Revit and in this version, when you want to make a parameter ( for example > Height of the frame ) a warning message appears which doesn't let to do that. Text says that >>> A reporting parameter can be used in a formula only if its dimension reference s are all to host elements in the family. as a result it was impossible for me to control the length of opening in my project. could you please introduce a loophole for me ?

[@michelangelo3128]

Probably tou placed a dimension on the reference level (black one) instead of the reference plane (green one)

[@FarhaNzAsyraf]

@@michelangelo3128 thank you!

[@mintgirl3290]

@@michelangelo3128 Thank you very much, it worked!

[@salofranca]

show

[@rajap1581]

Why ex

[@barretthigginbotham4665]

two hours on this tutorial just to give up because the last step wouldn't work.

[@justiceegwabor3218]

Amazing video...... Simply amazing But..... Can sum1 pls explain to me why Balkhan is trying to speak English to us we don't need?..... Oga speak am anyhow...... No b grama we cum find for here.......

[@newgenarchitechture2974]

Your videos are too complicated