Dormer in Revit Tutorial (Revit Roofs Tutorial)

[@Buziulka]

You are the happiest teacher I have ever seen. Learning with you is such a pleasure. Thanks for any free materials.

[@nelsonsilva7572]

You make it look so simple. It wasn't as simple when I tried, but I didn't even notice there was a dormer tool. Thank you!!

[@gregm7976]

I've been designing homes for awhile and adding dormers and never knew about the "Attach Wall (Base)". I've always used attach "Top" but never used "Base" to attach the bottom of the walls to roof. Great Tip!

[@aminakasymkanova4252]

ohh really. i am too. thanks balkan architect👍

[@mirakbar9029]

I have practice this tutorial as I watch this video. thank you so much. It was very rewarding to do so.

[@lingqu6670]

You just make it so simple and clear. Loooove your videos so much. Really appreciate your work!

[@scvu]

This is the simplest dormer video ever that i not only saw but understood just perfectly . Thank you so much! following you.

[@dgetzin]

This was an AMAZING video that really solved a headache for me today. The selection of the opening was a bit funkier than the demo showed. - BUT S solved it and found that NOT deleting the back wall so soon was what I needed to do for solving that.Thank you.

[@nasirahanger1660]

Best teacher on KZbin

[@FARHADZAMANIJAM]

so simple and clear that I have ever seen in 🌍

[@Ruokky]

Thank you for your help ! I'm an HVAC designer on Revit and I'm modelling my own house, but I needed help for the Architecture part

[@kgore936]

Nice job. You’re awesome at this

[@vikramdeonaraine2866]

Keep up the good work Balkan Architect

[@HarshaVardhan-zg5qc]

i humbly thank you sir...

[@yigitkayis1837]

You are genius. It's like you hear the subject I'm curious about and you shoot a video :)

[@funkyseefunkydo9622]

Thanks Balkan. Love your work as usual mate

[@AMAANBHATKAR-y2o]

perfect explanation

[@charlesfield9286]

Perfect as always

[@PedroOspinaTukahnesPacific]

Thank you very much, God Bless you

[@abukassehkamara9696]

Wao great, this one is simple and straight forward

[@ЛилјанаНајдовска]

Thank you so much ☺

[@Mekree]

Thank you, very helpful!

[@johnsoncheng8580]

Thanks for the tutorial. Very helpful!

[@myheartsathome]

Very helpful, as always. Thanks!

[@bendamir2391]

Thank you !!

[@mohabothman4620]

Thank you so much

[@adrianasegura8669]

Great video

[@haidaral-hamdani9504]

Thanks dear you're kind man brother.

[@frans6cur8886]

This was really great and helpful thanks

[@user-wk1kv5yu6v]

thanks, you make it pretty easy

[@TheMozart333]

thanks, really help!

[@niklaslundmark2140]

Great Learned something again today

[@jonparsons6818]

Nice and clear

[@engineeringlife6478]

Pretty nice tut.

[@sakhighani3352]

Tnk u so much for ur efforts

[@BrandonGabrielAlvarez]

YOU ROCK

[@dorotejaradoicic2268]

THANK YOUUUUU

[@krishnamoorthyk8236]

Its very useful sir thanks

[@tgadesign2854]

Thanks bro.

[@itstimeforsomeaction]

You saved me, thanks

[@jonassembrano8617]

Thanks for this...

[@Luke03xx]

Good content!

[@sanmoravej]

You are awesome

[@saifhallem1275]

You are the best with revit Mr. bulkan especially you enhanced your language v.well I wonder if you can make a rendering videos? maybe by Enscape

[@jhacielricaldi5447]

increíble gracias saludos de Bolivia

[@sajidhvk]

Perfect

[@jacquesbasson8164]

void extrusion go brrrrr

[@debbieranieri5147]

Hi, This is really helpful. Thanks. Do you have a video on how to set the roof so it is cantilevering over the external wall frame so the eaves are the same as ceiling height level ?

[@wickyferns6802]

Nicely explained..thank you. Do you have any tutorials on working with point cloud data in Revit ?

[@gauthamguddera8830]

Attaching the roof dialog box is not opening for me. can anyone please help on how to fix that dialog box opening it. procedure wise.

[@gauthamguddera8830]

Attaching the roof dialog box is not opening for me. I may have checked "don't show this message again" by a big mistake but now i am repenting it. @Balkan Architect please help me with this issue.

[@legofreak5769]

thanks for this. i tried using the dormer tool for the first time a few weeks ago and it didn't go smoothly.

[@khrystynakarkhut4962]

Thank you. You make it look effortless, and I could simply repeat after you. I have a question though. How to edit or delete this dormer opening?

[@mohamadhoussamkastali2549]

It is a good video 👍👍👍

[@designcoordinationmanageme3177]

Great tutorial. Currently evaluating using Revit. Just wondering how the lead valley gutter between the two roofs is added ... and also ridge tile that stands slightly higher than main roof plane.

[@AussieBIMGuru]

Typically I use the fascia tool with a fixed angle V or inverted V profile for valley/ridge/capping. It wont match the roof angle automatically unfortunately, so usually I'd build a few angles types, or just build them to work for the corners of 22.5 degree angles rooves.

[@designcoordinationmanageme3177]

@@AussieBIMGuru Thanks. Part of me does wonder why Revit does not cater for things like this that alter the outline shape of the mass as standard without work arounds, but will have to try.

[@2299jsimon]

Yes... easy peasy.

[@arvinmazkoor]

great

[@Louis-kq2dw]

When he points at the link in the bio, it seems like he is flexing

[@junaidkhan2095]

can u please tell me how to create a dormer opening in structure floor

[@junaidkhan2095]

How to create dormer opening and dormer in revit structure

[@nagendramalkhed5658]

nice explanation, informative, u can make it bit quicker

[@antoniojoserincon14]

i love you

[@semirindesignllc7229]

This was helpful… but my walls wouldn’t attach to the roof after cutting in the dormer.

[@abdulrazaqmerzakheal8679]

Hi Sir I'm following your video, do you have any channel regarding 3D Max? If yes please mention

[@nodice100]

Niceee

[@renatalopes7747]

When trying to join the roof I got the following error: "Part of the roof to be joined misses the target face". What should I do?

[@7fold_design]

The dormer roof you're extending has to be 'contained' within the boundary of the main roof joining to. Easiest to view in an elevation facing the dormer you're working on to ensure it works. Otherwise it's just another roof if it's higher than the roof you're joining to. Does that answer your question?

[@mayadandachli5102]

thank you just wondering how your shadows show like that?

[@7fold_design]

Each viewport has 'Graphic Display Options' along the bottom left. It's the little menu with hidden line, shaded, realistic, etc. Just go to the top of that menu for additional options, find the 'Shadows' area and you can play with casting shadows based on the time of day or just ambient shadows to give a general sense of depth. The 'Sun Settings' is where you set the time of day to make shorter shadows close to 12p or longer shadows earlier/later in the day. Hope that helps!

[@tasibmushtaq690]

It shows can't create boundary

[@rebekka8920]

This isn’t helpful. when I do wireframe I see my entire building going back. I cannot cut a small hole in the roof for my dormer. I have been trying for hours.

[@aamidali8490]

I want to learn Revit

[@aamidali8490]

Please help me

[@gregmak1607]

LOVE YOUR TUTORIALS MY MAN, BUT NO OFFENSE, I'D RATHER SEE RIVET INSTEAD OF YOUR BEARDED FACE IN THE MICROPHONE, PLEASE.. NO OFFENSE..

[@balkanarchitect]

haha I know, but it helps with viewer retention. There are parts of the video where I'm just speaking and it gets boring really fast, when there is a moving face there, it helps to keep people focused and not click on a different video.

[@mohammedbakeerms9037]

Voice is irritating 👍🙌

[@gshilpa5545]

Thank you so much