Custom Fill Pattern in Revit Tutorial

[@kummer45]

You always do a lot for the community. I hope you gain success on all the things that you are looking for. With even these little lessons the whole community learns a lot. Thank you so much for your kindness and dedication. Without any doubt I'll get your courses too. I want to contribute. Your material is outstanding.

[@DiegoCamacho-k3v]

Excellent video! Honestly, you have no idea how badly I needed this. Keep it up!

[@daphnevlak]

I was literally searching the internet for fixing this problem last week, my call has been answered haha

[@ramneetkaur3224]

Revit has become so much easier to use because of your tutorials.. This was the best video for creating patterns.. and so easy to use!! Thank you so much!!!

[@m.abdirahman4689]

Sir, it is a really great revolution in Revit architecture, I am going to use thank you again and again

[@macitect]

Your tutorials are fantastic. Thank you Balkan architect!

[@ryanweyerhauser-maher4492]

Amazing work, I was doing it the long way before I found this video. Without out your help, Revit would be a lot more difficult, keep it up :)

[@jvbonzi]

That helped me a lot. I had to come back to this video just to leave the like. Thanks

[@melfaraj4633]

Brilliant as always Balkan. Keep the good work going!

[@abbasmuhammadd.7090]

Love this one now because i hate it when using image tile without accurate fill pattern...thanks and bravo.

[@samerzantout2377]

Thanks, with all my appreciation.

[@lesnyirenda]

Really helpful! Thank you BA!

[@gabrielnavarro4107]

Fantastic tutorial. Thank you.

[@alexandrrozdobudko2998]

Thank you. Very helpful

[@carlavanstraaten2917]

Thanks very useful and well explained!

[@sofiaemmavidalbucher2769]

very usefull!! thank you!

[@andremartins4770]

Thanks for your help.

[@jorgelunao1]

very helpful, thank you!

[@barbaramccarthy5507]

I love your videos. Always so helpful! I do have a question about patterns - where does pyRevit save the pattern? Does it generate a single .pat file? How can I share my patterns with other Revit projects?

[@love2laffwithu356]

Good question. I also cannot find this file that I've newly created.

[@sureshcivil8627]

@@love2laffwithu356 same here.. Any idea

[@chadabrahams3088]

Thank you for the awesome video. Did you add the link to pyRevit?

[@robertorobertini6221]

PyRevit looks like it could have a few other useful uses.Can you do a tutorial on it?

[@natejoseph4367]

Great channel! I'm looking for a video that shows the various ways to update walls on a floor plan using a linked model. When different disciplines link in an updated architectural model into their drawing, what are the different options for getting the wall, windows, openings etc updated?

[@73jaleel]

Please add the link for pyrevit in the description

[@famgroeger]

I liked your tutorials a lot because they were about native Revit. Using a plugin is not what i want. Trying to install py-whatever crashed my 2023 Revit ... :( Now i have no solution for my pattern problem, but a new problem getting rid of py code ... I will never do this again ... hope i can fix this somehow ...

[@turbo64011]

Great tutorial ! I was wondering if there is any way to use these patterns to make a solid form out of it. For eg. in the pattern made by you above i would like to have a solid made out of it where the circle is a void part and the rest is a solid part, so that it looks like a facade design. any method where you apply the pattern on the wall or a floor and the geometry(The central circle in case of your pattern) is cut out of the wall/floor

[@sukhpreetkaur8219]

Thank you so much for this useful video. You mentioned that you have put the plugin link in the description below for us to download but I can't see any link, please can you direct me on this, I will appreciate, thank you

[@coleriley3619]

lol, good luck downloading

[@horaciomacas3662]

Please, how can we control the line weight of that patterns, for plans or elevations for our printable presentations?

[@fitriabbas1997]

why cant i find the pattern i've made :( it didn't show up

[@jdeinteriordesign5332]

Hi !! Balkan, you forgot in this video how to cut pattern ...thanks

[@sridharanbiju]

Thank you very much for this video one more thing can u explain how to create standard layers in revit for a company

[@mhd3bd121]

Well done bulk revit 😜

[@danielhabib1425]

Greetings! thanks for you efforts❤ I would like to ask you what is the best way you recommend me to start learning Revit as an Electrical Engineer ?

[@mohamadhoussamkastali2549]

verey useful

[@איילתברק]

How do I change the view scale without changing the pattern scale?

[@hershyschwartz1454]

My Pattern isn't Printing or plotting what's the solution?

[@mkarchitekt4628]

it's amazing,, but how we can make holes or make this pattern on 3d ?

[@dikolotour]

Thank you so much! Is there a way to import autocad patterns in Revit?

[@mateo7387]

Yes it work save file in .pat

[@perrypereyra6671]

@@mateo7387 bruh thanks

[@hollyborenhb]

Hi is there anyway that you could make a video on how to load this pattern into a separate project or if anyone has some insight on how to do that it would be much appreciated

[@mohamedwasimakram2351]

How one can edit an pattern if top and bottom shall be at full size piece and center piece might have cut piece so that can be applied at different locations… for eg. brick wall in elevation where top and bottom is of full block center can be cut and could reduce pattern size??

[@akeemyinka4524]

Good morning boss, thank you for your magnanimity. please help us for the plugin to enable us get practice. Thanks in anticipation.

[@coleriley3619]

your video and tutorial are great, as usual. But to EVERYONE ELSE, good luck downloading and installing PyRevit lolllll. So so so so so difficult and time consuming. Grab your migraine relief bottle or Tylenol and be ready to be very patient. However this is why he left it out of the description and doesn't really comment on downloading it, because its a son of bitch to get it up and running

[@GabrielFrias]

And the link ?

[@francinaaltagraciacastillo1017]

github.com/eirannejad/pyRevit/releases/tag/v4.8.4

[@RomansRule1234]

I created a simple triangle patter. Now when I want to apply the hatch pattern to compressed earth, as part of a floor, the patter does not align correctly. It shows the center of the triangles and the rest are cut off. How can I make a pattern only repeat horizontally and not vertically. Because revit seems to stack multiples of them and I just need one

[@emiliobartolini3738]

can you rotate a drafting pattern?

[@nbahrman65]

I don't have pyRevit, but I have Revit 2024. Is any new feature in new Revit that can be used instead of pyRevit?

[@rickkremer0525]

Great tutorial. Question, if you create another wall, lets say at 90 degrees to it, the pattern doesn't align. Any suggestions on how to align them from one wall to another?

[@balwantelectronics]

Press "Tab" and select the pattern ,then you can able to move the pattern.

[@amjk0922]

How do you make the tile pattern appear in an elevation when you use this same approach?

[@johnalexandercorrea8793]

I saved the new model pattern, however the linetype I used won't show up. I need it to come in dashed. Any advice?

[@tjp5876]

I can get the pattern created but the pattern isnt available in the options to select a pattern type. pls help (detail not model)

[@bigcartoonyIIV]

im working on a stie plan how can i do a simple angle for hatch the french drains?

[@danijelaanuszewski4759]

I've used pyRevit for a while now, it works great but is there a way to add field region to a pattern?

[@niccolodipaola8293]

Hi. thank you very much for this video. I have a question: when I apply a pattern to an rotated object (not vertical like a wall, in my case a oblique panel), in 3d view the pattern keeps stay aligned with an hypothetic vertical face and is not showed coherent with the oblique face... Have you any idea how to solve this issue? Many thanks

[@rubenacue]

There is no solution

[@axesata]

For some reason it doesn't want to create patterns for me. I followed it step by step, but I don't get the pattern created/updated window. Anyone experience that and have a fix for it?

[@posipills]

thank you so much sir!!!

[@arqnepo]

How do i define the weight of the patterns? The Revit doens t have that option

[@camilalohezic2148]

Is there a way to do this without pyRevit?

[@pannlaelaemon4883]

Pls I want to get this plugin 'pyrevit'. Pls give me the link to download sir

[@prabhakarkumarsingh3521]

yes, i enjoyed it, but i assumed it was on .pat file.

[@hu5tle-]

Py revit just throws errors. Need another solution

[@kevinkumar6799]

Can I use the pattern that I created on Revit in Autocad?

[@murahk123]

where is the pyrevit link?

[@jor_cid]

👌👌👌👌👌

[@kalebzewdu1560]

Hey balkan How can we make a slanted wall and slanted curtain wall on revit 2020.....or if u have made a video before can u please drop the link i cant found it pls

[@rafiullahsherzad303]

Use Massing & Site Environment to create slanted wall in Revit 2020

[@shivam_g]

use reference plans

[@asmirvoljevica6731]

Otac