Homemade Power Wrapper. DIY fishing rod wrapper

[@emersonivankovic5892]

As for wheels on which rod rests I use the wheels for rolerblades ,which are available as spare parts for rolerblades,they are little bigger then Yours on video,but they have bearing inside and are made of rubber,the inner diameter for the bolt to atach is 8mm,the outer diameter of the wheel is 76mm but there is also smaller version with outer diameter around 60mm version . Very nice homemade wrapper

[@procrit50]

Very nice design, well thought out! Not sure if you are happy using springs for tension on your thread carriage. I made my own thread carriage also, prefer the round magnets placed at opposite poles. Gives me a much better thread tension.

[@BallubaFishingChainsaws]

But it will atract each other on that distance? 5 cm almost a thread spool

[@BorkyCustomRods]

@@BallubaFishingChainsaws salut! eu folosesc magneti de neodim rotunzi cu gaura de 6, au costat undeva la 14 lei bucata plus transport am eliminat cu succes toate arcurile dupa ceva modificari

[@BallubaFishingChainsaws]

Mersi. Am sa caut si eu sa vad cum e

[@emersonivankovic5892]

As for springs I use the springs which are on bicycle wheel under the bolt with which you tighten the bicycle wheel

[@StormRidersFishing]

Nice job. Trying to find similar wheels is very difficult.

[@BallubaFishingChainsaws]

The wheels are made by me on laser. You can't fiind them:)

[@MuraiWoodworks]

very nice. i want to build one as well and i think i will use your design as a reference. cheers

[@BallubaFishingChainsaws]

Thx. Happy to help anytime!

[@jamespierson9312]

Very nice build.

[@BallubaFishingChainsaws]

Thx

[@beachtrash1852]

Where did you get the base for this?

[@BallubaFishingChainsaws]

Hy. I made it myself on laser at work. From 1.8 mm sheet. Bend it after, holes in line at laser as well for the v-slot aluminiun profiles.

[@emersonivankovic5892]

You can buy an aluminium profile for curtains which has this sort of groove through the lenght of the profile, in the midle,there are few versions 3m lenght with one groove,2 grooves or three grooves or 2,5m or 2m lenght, because it is made from aluminium,it is reccomended to bolt it on some harder material undetneath it,because of the lenght it tends to bend if not bolted on something.

[@bazzaip2698]

Where can i order the control pedal?

[@BallubaFishingChainsaws]

U take a sistem from a screw driver!

[@bazzaip2698]

@BallubaFishingChainsaws that do reverse and forward? Anyway ! Thanks for the reply

[@yoanndubois3267]

Bonjour Vraiment super travail Auriez un schéma de câblage pour la parti moteur avec la pédale et une photo du transformateur j ai les lien pour le matériel j aimerai le réaliser Encore bravo Bonne soiree

[@BallubaFishingChainsaws]

Bonsoir. Chercher moi sur facebook avec la nom Ocsca Attila. Envoyer une mesage et domain soire je peu faite quelque photos. Bonsoire

[@kamilb3571]

Hello, I really like the design of your blank supports. Would it be a problem for you to send me the dimensions of these parts? I'm also building a wrap and your supports are brilliant. Regards, Kamil

[@BallubaFishingChainsaws]

Hi. Give me your email and i send you all the dxf files. You can open on your pc or phone via some programs autocad. There you see all dimensions.

[@Chris.Biard42]

Love you video. Would like to order the same tools on ali express, would you mind to send to me the plans and the way you connect motor to the pedal that's such a great job. Thank you so much :)🙏🙏🙏🙏

[@Hookendy]

nice machine

[@BallubaFishingChainsaws]

Thx