Mastermind Creations Reformated R-12 Cynicus The Investigator

[@Crab_cos]

Don't freaking touch him -procedes to immediately touch him

[@majinlifestyle]

I have never heard of vos before

[@dol_mel7487]

hes part of the DJD they came to be in the IDW More than meets the eye comic and their gonna be (also deathsaurs with his group of people (the menbers of liokaiser,dinoking, the pretenders and etc)are going to help the DJD fight megatron) verusing megatron (he is an autobot and is the captain at the lost light at the moment)

[@johnreel0161]

+Jason Dembowski Jr thats because he only showed up in the comic books

[@majinlifestyle]

+Johnreel01 ah, that would explain it, I've never really read the comics

[@exodia396sforbiddenreviews7]

I like the history and story you give for vos. It needs more exposure

[@petrosdimakogiannis9223]

Exodia396's Forbidden reviews bruh what. You think this guy made his story?

[@exodia396sforbiddenreviews7]

@@petrosdimakogiannis9223 no obviously it's from IDW. just saying it needs more exposure

[@hajbra3731]

Guess we won't see the 95.000 subs giveaway...

[@dol_mel7487]

its probably for reasons it hasn't happened yet

[@hajbra3731]

Dunno... If that's the case, why didn't he tell us? I've been following his tweeter for a few weeks and there are no messages about the contest.

[@CuppaLLX]

so a sniper rifle toy is ok but not a walter p38 megatron?

[@wampasully7797]

+Lexx Alolia this in no way looks like a real firearm and is significantly out of scale. P38 megs was roughly the right size and given a realistic color scheme.

[@CuppaLLX]

so just make megatron dexuxe instead of leaderclass

[@muisverriet]

+Lexx Alolia They did that a while ago but he was turned into a Nerf-style gun.

[@dol_mel7487]

+Lexx Alolia its because its made by a third party company its not an offical product they can be sold at retail and can be mass produced

[@JRMARTS]

basicly a skinny megatron

[@Tri916]

He is like a gunpla kinda

[@krsspr1032]

Which comic did Vos appeared in using his Face of the Iron Maiden?

[@dol_mel7487]

In the comic where they reappeared aka when trailbreaker dies

[@greggrice5417]

more than meets the eye number 7 and 8 and number 34 or 35 ish

[@crab7252]

I honestly thought this was a gunpla

[@stephentay7084]

Ethan Nguyen. Haha me too XD

[@virtuousvillain5553]

You gonna get the iron factory version?

[@carnut015]

This seems like a figure for the hardcores who keep up with the comics. I guess that is what 3rd party companies are for, though.

[@dol_mel7487]

i am not sure about that most of the reviews i have seen the reviewers had tighter joints and were easily able to pose them

[@carnut015]

I was not talking about build quality or QC issuses. I was more referencing to the character being depicted. If you do not read the comics, the chances of knowing just WHO that figure represents is going to be slim.

[@conducktorwhirlwarstartera5055]

+carnut015 I agree. And I LOVE IT!

[@dol_mel7487]

On unrelated news tfc is doing a not liokaiser and not king poesideon

[@dol_mel7487]

For those parts-forming haters he was a partsformer in the comics since he literally weilded parts of the gun of the alt mode

[@frelisseK]

spada i love you you clumsy oaf but seriously this figure is not that difficult to transform, it does not require popping joints off and all =P

[@dol_mel7487]

Great figure overall and cannot wait for masterminds future releases!

[@trustarscreamer]

Also though he comes with an adapter for Feral Rex to hold him.

[@medestro4914]

where can i read the idw comics online?

[@Dracologist]

I could imagine this character work with the IoM's inquisition

[@ThePlank1991]

Is it possible u just got a figure with bad QC? Or is this a known problem with Cynicus?

[@effectsofraven]

What comic book series is he from? There's so many IDW series, I have no clue which one to look at for this because his concept sounds great :D.

[@DetectiveBarricade]

+TNP Wazzock He's from the current ongoing Transformers series, More Than Meets the Eye. (and Robots in Disguise)

[@aitoranimations3612]

I thought it was a female

[@transformabrick5372]

Same

[@KarachoBolzen]

Well,I like Vos just because he seems to be the most twisted decepticon I know :D But you're right,that the panels don't lock in just seems plain lazy to me :/

[@theminecraftlamma9829]

I love this figure

[@hasanbarzinji899]

balt your starting to forget many things man?

[@KarachoBolzen]

Do you actually have all members of the DJD? And,if not,are you going to get them? :3

[@meichen347]

If I buy that I would give it to my friend :3

[@monayemmunna7513]

its a ccol transformer

[@Wigglyferret]

Oh, it locks into place, Balt... You have just mis-transformed Vos by not properly putting that waist-bar joint properly in place during gun mode. I have to admit that I normally love your work but watching you just ham-fist this figure during the video made me cringe. You shouldn't have to "field strip" this figures' parts off the ball-joints to transform him. I understand that he is challenging to transform because he is finicky and the instructions are darn near useless but with more practice you can get much more out of this figure. This is a figure you have to study to master. The question is: Is this figure worth the time for you to do that?

[@adampoole948]

why are these figures so expensive? is it just to rip off rich people? cause you can get older official transformers figures that are as good or even better in quality then these for much cheaper

[@muisverriet]

These figures are more expensive because they're not mass produced. They're also better painted and have better quality overall.

[@allenwalker1123]

Better paint, I agree, especially when comparing to Hasbros's. But better quality, not really, cuz in some cases, some 3rd party figures are not good at all. More specifically, they fail as a toy or transformer toy, because they break or damage so easily, which the official toys rarely do.

[@dol_mel7487]

+allenwalker1123 thats because they don't ohave the quality control and limitations od offical figures plus that was mostly the orginal third party figures which weren't that good ,and the reason they have issues with breaking is because yhere a collectors item their not meant to be played with by a kid or like every single day

[@allenwalker1123]

I can't really agree with that. Cannot be played with because it is a "collectable" sounds more like an excuse than a reason. I mean, how to define if a figure, or a transformable figure is a collectable or not? Is it the price tag? If it is, then it's even more nonsense when the fact is that I can play with a cheaper figure and it doesn't break, while can only display a figure with a higher price that can easily break at certain point. Or is it about the look, the details and the paint jobs? But those have no relation to the easily breakable issue of that figure. What I'm trying to say is that, it isn't impossible to make a figure that is not fragile. All they need are good designs and most importantly, good material choices in every part. Using harder plastic or even metal doesn't mean it is safe. Sometimes using softer plastics, or as some people called, cheaper plastics, can be much sturdier than the above materials on the figure. I used to help people fix their figures, and according to my experiences, wrong material choices is one of the biggest reason that causes breakage so easily on these 3rd party products. One example is that FPJ likes to use hard plastics even on the rachet joints without any spring mechanism, which makes the surfaces damage so much faster than normal.

[@muisverriet]

allenwalker1123 Again, it's because they're not mass produced. Same goes for Japanese import figures like Figma.

[@ZetZatar]

This figure single-handedly turned me off of MMC. It's the only figure I have of theirs, but if the rest of their stuff is even *half* as sloppy/fidgety as this. No thanks. It felt ko-quality (tolerances/fit/joints) at a premium price. :(

[@ailma0400]

ZetZatar Incredibly late response BUT, with the small structure of this figure, it’s pretty par for the course that he’d be more delicate. Their larger figures are far sturdier and solid than this guy. Their Tarn, or Kultur, is a very nice, solid figure with a sturdy construction. Just trying to see if I can change your mind on MMC. This figure just seems like a fluke on their otherwise good track record.

[@danielsochay9850]

I would love to see the entire DJD as figures, but not like this. I do like that the included the detached face though.

[@dol_mel7487]

um I think balt got twh forst of the figures so again its notas good as the rest

[@conducktorwhirlwarstartera5055]

+Daniel Sochay MMc is making Kaon and Tarn as we speak. As for the review. Emgo didn't have any trouble with his version of the figure. I blame QC for the faults on Balt's figure.

[@stayedwoozie9378]

Daniel Sochay true dat

[@aqua8785]

Iron factory is making a combiner off of the 5 of them. I just preordered the figures so maybe they might even include extras like nickel or the pet.