I put the ams on top of the machine with a mod I 3d printed. Is it any good? ➡️ Business Inquiries = Techandmore66@gmail.com
Пікірлер: 37
@dutch18004 ай бұрын
I printed one as well, I did put a few wraps of duct tape around the latch though. Better safe than sorry.
@normang44 ай бұрын
@AdamsTechReviews, can you detail which screw sizes you used from that screw kit you bought in the assembly of the mount, and perhaps where they were used? Thanks
@BellionaireStudios5 ай бұрын
I printed mine yesterday get machine on 21st thanks for sharing
@AdamsReviews5 ай бұрын
That is awesome! Mine has been great
@oljakom87844 ай бұрын
@@AdamsReviews асммп
@rhencullen4 ай бұрын
I printed the top mount parts in Orange PETG for strength, with the rear supports in Orange PLA. Only real concern I had was that the top cable routing clips made the exit from the first AMS spool very tight indeed and the AMS was having trouble feeding the filament from slot 1, so I ended up removing the guide for 1 & 2. Didn’t get the jet engine kit myself, my A1 came with the Tourbillion kit which looks awesome!
@AdamsReviews4 ай бұрын
Nice, its cool they are including something.
@mattyice9548 күн бұрын
I have the A1 mini and A1 and no discovery kits 😭
@rickseverythingiracing4 ай бұрын
Will do
@robcaseyire4 ай бұрын
I wonder could ya use the lack style enclosure, with the ams lite sitting on top & feeding through the top table?
@F.DoctorGT03.4 ай бұрын
Hello and thank you for your video, I printed the ams lite adapter myself, but before putting it in I was wondering if you noticed any twists or anything else on the X bar, do you think it is strong enough? Or could this position possibly damage something else? thank you ....
@liquidsleep4 ай бұрын
Could you measure the total height of the printer with the ams on top. Let say, to the top of the spool and to the top of the tubes ? Would be great, thanks.
@chrisshakal59044 ай бұрын
Hey man, CATIAV5FTW here, hope to see your build of the jet engine! I'm working on some design improvements to eliminate some supports, but the current design is still great. Btw, Bambu told me the initial production run A1 units will come with either the jet engine or tourbillon kit.
@AdamsReviews4 ай бұрын
Nice, thank you.
@nmaparicio3 ай бұрын
could you put links here to those supports for the a1? and ... the screw box btw...
@jon12104 ай бұрын
Hi i was wondering if you'd be able to provide a link to those rear support brackets
@mariabalabagno36384 ай бұрын
Great info, cam you link the rear supports for the A1 cannot find them anywhere. Thank you.
@AdamsReviews4 ай бұрын
makerworld.com/en/models/92486#profileId-99168
@crewjones2674 ай бұрын
What hardware did you use? Did you buy the kit from bambu?
@rickseverythingiracing4 ай бұрын
printed mine also printer coming tomorrow i put a heat insert in the latch on the back for a just incase
@AdamsReviews4 ай бұрын
Let me know how you like it.
@bourjuva4 ай бұрын
does it affect print quality badly ?
@TheFlamingEyeball4 ай бұрын
I looked for these files on the BL site and can't find them. Do you happen to know where they are?
@darrelduke4 ай бұрын
i printed the same on top file with the z axis supports as well. the rear supports creak and squeak terribly while printing, has anyone had issue with this as well and if so any solutions/ thanks
@VictorCaro5 ай бұрын
I didn't get that additional engine in my box and ordered straight from Bambu labs
@AdamsReviews5 ай бұрын
wow must be a micro center bonus.
@bg47795 ай бұрын
Must be. I got my A1 from microcenter and I got one of those kits.
@chrisshakal59044 ай бұрын
Did you get the Tourbillon kit instead? The initial production run A1 units are supposed to come with either the jet engine kit or Tourbillon kit.
@ckhong884 ай бұрын
I ordered direct from Bambu Labs and got the Jet Engine kit with mine
@VictorCaro4 ай бұрын
@@ckhong88 according to the support email I just got back last night, hardware kits are randomly included, so not every package will have one. Not the end of the world, but still disappointing
@sensi420x4 ай бұрын
Where did you get that table/platform.
@AdamsReviews4 ай бұрын
walmart...workforce
@angrygaragemechanic5 ай бұрын
What did you do with the R Qidi 3d printer?
@AdamsReviews5 ай бұрын
The Max 3, I still have it.
@angrygaragemechanic5 ай бұрын
How's the print quality compared to the Bambulab? Thanks
@christian_U815 ай бұрын
somebody needs to make a cablechain for the extruder