Bambu Lab A1 Durability Test - SHOCKING RESULTS

Patreon: / nathanbuildsrobots
My Store: nathansellsrobots.com
Discord Channel: / discord
Jarrett's Website 3D Printed Replica Armor and Full Sized Replicas: StackingPlastic.com
Today's Watch: Casio Classic G-Shock GWM5610-1 amzn.to/3wKVIG3
The links in this description may be affiliate or tracking links. I may earn a commission on sales made through these links.
0:00 Phase 0 Smashing Cable
2:27 Phase 1 Sawing Cable
3:25 Backstory
4:25 Phase 2 Durability Test
Please petition Bambu Lab and tell them to put me back in the affiliate program.
Proposal: Inclusion of Nathan Builds Robots in Bambu Lab Affiliate Program
Dear [Recipient's Name],
I hope this email finds you well. I am reaching out to you on behalf of Nathan Builds Robots, a burgeoning entity in the field of robotics innovation. As a passionate advocate for fostering collaboration and driving advancements in our industry, I am excited to discuss the possibility of Nathan Builds Robots joining the esteemed ranks of the Bambu Lab Affiliate Program.
Nathan Builds Robots has been making significant strides in the realm of robotics development. Their commitment to pushing the boundaries of what is possible in this field is evident in their innovative designs and dedication to excellence. By including them in the Bambu Lab Affiliate Program, we stand to gain immensely from their unique perspective and expertise.
Here are a few reasons why I believe Nathan Builds Robots would be a valuable addition to the affiliate program:
Innovative Solutions: Nathan Builds Robots has demonstrated a knack for developing cutting-edge solutions to complex challenges in robotics. Their ingenuity and creativity have the potential to inspire and enrich the entire affiliate community.
Collaborative Spirit: Nathan Builds Robots fosters a culture of collaboration and knowledge sharing. By joining forces with other affiliates in the Bambu Lab network, they can contribute their insights and learn from the collective wisdom of the community.
Industry Influence: With their growing influence and reputation within the robotics industry, Nathan Builds Robots can help amplify the reach and impact of the Bambu Lab Affiliate Program. Their endorsement could attract other innovators and thought leaders to join our ranks.
Mutual Benefits: Collaboration between Nathan Builds Robots and Bambu Lab would be mutually beneficial. As affiliates, they would gain access to resources, networking opportunities, and support from Bambu Lab, while also enhancing the prestige and visibility of our program through their association.
I believe that by welcoming Nathan Builds Robots into the Bambu Lab Affiliate Program, we can create a synergistic partnership that drives progress and innovation in the field of robotics. I am eager to discuss this opportunity further and explore how we can work together to achieve our shared goals.
Thank you for considering this proposal. I look forward to hearing your thoughts and hopefully, to welcoming Nathan Builds Robots into the Bambu Lab family.
Warm regards,

[@DDDengineer]

This is just stupid

[@NathanBuildsRobots]

It’s more than just stupid

[@enhidri160]

@@NathanBuildsRobots it's stupid.. and dumb!

[@jeffames226]

3 nerds beating a printer to death. Office Space anyone?

[@charleylavin]

Was fully expecting some gangster rap and some pc load letter references

[@sliverbaer]

"be careful with that, oh wait it's not plugged in" 😂

[@haylspa]

yeah metal Rod in hand, while stabbing at live Wires!! might as well go outside and hold onto the grounded Metal Lightning Rod during a thunderstorm

[@5Lax]

TLDR: Nathan Destroys Robots

[@RBallarddesigns]

NBR’s new name is Whistling Filament. Durability testing is important. Thank you for your dedication to this test

[@3DandTeePrinting]

I have never been more conflicted in all my life. One side of me is on my knees, crying inconsolably and begging you to stop. The Other Side is Standing there with you guys with my arms crossed watching and saying "This Needs to be Done." Thanks for that!!!

[@MarcosPerez-pd4jm]

I suggest an "Accidental throw by second floor window test", and you can call it "the Putin test".

[@charlesstaton8104]

That is a mains-powered bed. If you actually had it heating while assaulting it with unistrut and uninsulated hacksaw as the video suggests, you are fortunate to have not been given a nasty surprise.

[@NathanBuildsRobots]

1 hand rule + 3D printed sandals = temporary invulnerability

[@charlesstaton8104]

@@NathanBuildsRobots LOL well ok, I guess your results speak for themselves. I don't know anything about 3D printed electrical safety sandals but the 1 hand rule is no safeguard against shock, it just decreases the risk of death from shock.

[@LilApe]

Nothing of value was destroyed in this video. *I haven't seen bambu lab fans this mad since their printers started up on their own in the middle of the night and destroyed themselves due to "cLoUd OuTaGe"*

[@NathanBuildsRobots]

Bambu Lab requires an emotional regulation chip to be installed in new user’s brain stems. It makes them mad when you say “Bambu Bad”, and makes them feel bliss while watching multicolor poops cover their desk.

[@enhidri160]

@@NathanBuildsRobots So this is you after Bambu never sent you a free X1C because your P1S was squeaky? I have the support convo saved in case you want me to post it on your comments again.

[@cedricmaltais5662]

The issues was about bending …. Not smashing and being cut with a saw…. Alright you have bad feeling about not receiving a review unit … but this is a show, not an actual informative video …. But still.. glad to see how strong they are !

[@NathanBuildsRobots]

It surpassed my expectations, I'll give it that!

[@hurzelgnurk]

stabbing a live wire with a metal object, good idea! What is the resistance of those printed shoes?

[@NathanBuildsRobots]

Good point. Next time I will wear my hovershoes

[@TheOneAndOnlySatan]

This should be a monthly thing, so odly satisfying ❤❤

[@NathanBuildsRobots]

Every month a printer must be sacrificed… I like it!

[@TheOneAndOnlySatan]

@@NathanBuildsRobots We should set an example for other printers. Scare them into keep functioning else its off to Nathan with you shitty printer ! Il bet you allot of us have printer to donate for this❤️ you keep finding those new edges, something not done before!

[@jmtissera]

But… why?!

[@yeabutwecouldbefreer]

Why not?

[@NathanBuildsRobots]

Someone sent it to me and told me to destroy it. I can’t refuse a request like that 😊

[@aeonjoey3d]

Content, clout, views, edgelording

[@AndrewAHayes]

@@NathanBuildsRobots Why? And why didnt they just get a refund on it from Bambu?

[@Declopse]

I guess Bambu Lab is a garbage company who don't keep their word: "no more bed slingers"

[@AFAR2809]

TBH, I haven't even replaced mine with the replacement part I received......... It's still working fine... hahaha

[@kitcarlson6033]

A real engineer would have broken it, with a destructive vibration calibration procedure.

[@NathanBuildsRobots]

Would love to put it through its paces. Also needs wind tunnel testing, 500 hrs of salt spray, lightning strike, and drop testing

[@elchavode6479]

Now if you can put it in a rock tumbler for science

[@andrikurniawan531]

for someone who must save half year to buy one of this printer, this is heartbreaking

[@Frank_Panucci]

No JERRY RIG EVERYTHING-style reassembly & revival?

[@NathanBuildsRobots]

He's Dead, Jim.

[@Mintor94]

This was just pretty fucking stupid tbh. I enjoyed it

[@cagerage21]

This is awesome! I actually want to order one now haha!!

[@NathanBuildsRobots]

All publicity is good publicity. I tried to explain this to bambu lab but they don’t understand 😂

[@cagerage21]

@@NathanBuildsRobots Fucking epic man haha! 😎

[@aeonjoey3d]

Only on KZbin is behavior like this rewarded with positivity, you probably harm animals and shouldn’t be within 100ft of children.

[@timhooglandyt]

The Binford shirt is a nice touch.

[@gitss7367]

My top two printer information guys interacted, nice. Now if I can get DPT to wander in we might have the start of a 3d printer buddy cop movie.

[@elchavode6479]

I have a serious issue with this video because it needs the song Still by geto boys

[@honestnewsnet]

Experiment?

[@heinzkup]

nathan and friends did indeed touch gras, but holy moly was that gras looooong! unfortunatly the lawnmower was stroke by some baboons hanging of a rusty pile, so we need a new timmy!!

[@yeabutwecouldbefreer]

PC load letter????? Damn it feels good to be a gangsta🔨

[@FranklyPeetoons]

X-skrooshy-ating. I was waiting for an ELECTROBOOM moment.

[@CoryDAnimates]

Whaaaat Redditors over inflating user errors as factory QC issues?

[@lauretiu]

Im lost. What was the purpose of this? What did this prove ?!! 🤔

[@simplegamerz9485]

Hey Ferb I know what we’re going to do today!

[@emil7598]

Nonsens & end of Abo.....

[@jamesgates1074]

I thought I was watching HowToBasic.

[@NathanBuildsRobots]

How to change your Bambu Lab nozzle

[@Mr.X3D]

I did the same thing with my klp-1. Difference is, it deserved it

[@enosunim]

I guess it is out of warranty now...

[@NathanBuildsRobots]

IM SENDING IT BACK!

[@MinePossu]

​@@NathanBuildsRobots pls do 😂

[@fishandchipsinnit]

I mean, I can see now why bambu dropped you

[@NathanBuildsRobots]

You’re absolutely right. They don’t like when people REALLY test their printers.

[@enhidri160]

@@NathanBuildsRobots Ah yes, because i regularly beat my printers to death.

[@Declopse]

They're like Ferrari. They don't like mods on their "baby's"

[@claytonanderson9665]

@@enhidri160 You....don't? Huh

[@petermarkk1408]

….why everyone dropped him!

[@omgfrankie]

I see no anger issues with this video. lol. This has placed a smile on my face.

[@AvashTeck]

It is not only a durability test It's a video showing our inner anger we get when these 3d printers just don't work. #3dprinterbanged

[@3D_Printing]

Microsoft Windows Vista users had some other ideas

[@downsyndromebear]

The video was oddly satisfying, the video comments on the otherhand are something else. 😂

[@petermarkk1408]

your medicines are empty

[@3D_Printing]

Your supposed to use an axe to hit it 😆

[@3D_Printing]

Hacksaw is ok but chainsaw is better 😮

[@jonroth6981]

Yeah the guy claws back some form of credibility and then proves once again why he lives in his moms basement and doesn’t work a real job

[@NathanBuildsRobots]

Is this parody?

[@charlesraes8541]

Hard to figure out whether it is or not…

[@MrQuickEdits]

lol... you struck a nerve with all the bambu lovers out there... they are putting your name on a kill list now... funny thing though, there was a comment below where they wished you used a Creality printer instead.

[@dennisraadschelders6821]

That’s all nice and tuff Nathan, however the crucial question that should be adressed here is “will it blend”

[@kwedl]

Finally an honest review.

[@Rowan1108UA]

Maybe not a shill but definetly biased :)

[@LeadDennis]

3d printers, jackass edition. :)

[@petero8875]

What a daft video. Why? Why on this channel, which stood for a kind of serious and professional approach? 😥

[@NathanBuildsRobots]

subverting expectations

[@TNX255]

Isn't this the definition of "kind of serious"? ;)

[@TheMidnightSmith]

Look man, maybe stop the edgelord stuff and go back to doing reviews and tests. This isn't a good look. Look what happened to DPT over the years.

[@NathanBuildsRobots]

Oh my gosh - you’re right!

[@elchavode6479]

But this is test

[@Declopse]

This is a scientific test. Best content ever. At least we know we should not take Bambu Lab serious when they've stated: "no more bed slingers"😂

[@xl0xl0xl0]

Create a second channel to post low quality content, or you will lose engagement/subs on the first, and the algorithm will rightfully not recommend your vids.

[@NathanBuildsRobots]

This is high quality content though

[@My3DPrints-ve8zl]

destroying the Printer, and calling it a test Thumbs down not Watching (at least if you did this to a Creality instead of a Bambu!)

[@NathanBuildsRobots]

You just don’t get it. It’s a durability test, this is important

[@haylspa]

@@NathanBuildsRobots thats not a durability test!!! Durability Test means putting it through it's paces at what it was designed for, putting it in a Heated enclosure seeing what kind of heat it can handle without the electronics freaking out, thats a durability test real world situations people might actually put this machine through Real DATA!! that is useful! your just for-filling your destructive nature looking for views while you do it.. smacking it around with a metal bar and hanging it like a Pinata. is not a Durability Test!!! it's destruction! Next time take it out to the shooting Range and say Bullet Proof test!!! you will get a lot better Shock and Auhh Response then the Kid with a Stick!!!

[@honestnewsnet]

This is wasteful. I need this printer.

[@NathanBuildsRobots]

The person who bought this printer requested that I do this. I gave the AMS Lite to Jarrett, with any luck, he will buy a printer to use with it and become a Bambu Lab fanboy. Now that's what I call marketing!

[@theVariedLife]

Okay... i used to watch because of the quality of videos. I guess you are going in a different direction now. Disappointing.

[@TNX255]

"Severe use cases" :D For that it seems there is still some more development left to do