Bambu Lab Adhesion Issues Solved: Warp-Free Bed Fix

[@OldManJimmy1]

Have a Bambu A1 slightly having bed adhision issues, checked my bed for flatness and it's great looks like. I have been using brims in the Bambu Studio in the processes section, global, advanced then the others tab in the "Bed adhesion" at the top of that section. I would like to use mouse ears in the corners, I've used these before but can't figure out how to add these yet in Bambu Studio.

[@po5tup568]

I’d be interested in seeing the bed reinstalled

[@TouchMyPlant]

Try polishing the bed with 000 steel wool to take down the shine a little. Works great.

[@Qwadsqwadd]

True that, Or just use your warranty and get the bed replaced 🤟

[@RS474]

I’d be interested to know which parts you replaced. I’m facing the same issue 😢

[@Qwadsqwadd]

They replace the whole bed, I started with upgrading the textured plate, and it made a difference, but ultimately the bed leveling feature was not working on the bed, and it was warped, so those two things made it, so that I always had failed prints

[@Qwadsqwadd]

Reach out to customer service and explain the issue. They will probably have you send out your log files and then offer you to replace the bed.

[@eliortiz7024]

I got desperate and annoyed so I started adding an outer brim on everything and then pausing the print and using tape to keep it held down.

[@Qwadsqwadd]

Yeah just get your bed replaced I was doing the same at 1 point lol