HOW TO MAKE PROFIT IN BAR SOAP USING COLD PROCESS

This video illustrates how to make profit in bar soap using cold process making.
We will be learning how to make white soap cold process and boost the soap quantity using fluid and soda ash, sodium silicate and sodium sulphate .
We will achieve a hard bar of soap shiny and equally smelling very lovly.
Achieving more quantity and less cost of production also depends on nearness to raw materials and how cheap the raw materials are, we can’t literally compare factory production with a 1 to 10 liters soap made at home 🤔.
So try to leatn how to make bar soap using other oils and not only palm kernal oil to save cost. And imptove soap quality.
Palm kernel oil 2 liter
Tallow or palm oil 1 liter
Or palm kernel oil 3 liter
-------------
Caustic soda 500g
Soda ash 500g
Sodium sulphate 600g
Sodium silicate 500ml
Foam booster 500ml
Fragrance 30ml
Calcium carbonate or kaoline optional (100-600g)
--------
#howtomakecoldprocesbarsoap#coldprocesssoap k#barsoap#howtomakeprofitinbarsoap#howtomakebarsoapforbeginners #howtoboostsoapquantity#howtomakesoapwithtallow#hwoteomakebarsoapwithanimalfat#howtomakebarsoapusingcoldprocess#csoaper#youtubegrowth#hwotomakemoneyonline#businessifea#businessformoma

[@IjeomaPeter-u4b]

I love your teachings ❤

[@ImaobongEtiese]

I love your teaching

[@adesoyesofiat90]

Love you so much 💞

[@EmmanuellaMacfire]

Pam kanel oil is pko right? Which order oil am I mixing it with

[@ChiamakaAgu-k5r]

Pls ma how can one melt the cut out ones, Is there time it can no longer be melted?

[@dejiola2001]

Considering the cost of things now is it not better to use palm oil alone?

[@oliverokaofoezeputalam2814]

Thanks for the video ma, Please do you use hydrometer for your caustic solution?

[@ichieeze2270]

Thank you very much ma

[@Babylover201]

Can i use due to foming bosta is sulfanic acid

[@EbereAnthonia-e5f]

Please ma ,can you tell me the quantity of water and oil to produce 1kg of caustic soda

[@onwanyinaomi5997]

Thanks for this, pls how can I get the cutter?

[@oluwatosinsangodeyi7968]

Please what about cautic soda that have been desolved for about 3yrs in water how can it be calculated.can I add soda ash and calcium to my soda,the one I Did don't look neat and it became add because I used palm oil

[@Daisibunmi]

Please where can i get this mould

[@Joydorgha]

What if you are using only palm oil

[@Innovativ50]

Thanks for this video,for bar soap how many amount of oil mix with soda acoustic

[@OmotolaniOtukoya]

Very understandable video. Thanks and God bless you more 🙏. Please what are the measurements for 10 litres OIL.

[@OmotolaniOtukoya]

And at what stage do I add colour if I want?

[@Nyenyeozjeksksk123]

Did you put calcium carbonate??

[@TeejayKidscollection]

The pko some are not even good too

[@goldenking6432]

Watching your video from Kenya i want my soap to be as perfect as your

[@oluwatosinsangodeyi7968]

Please what about cautic soda that have been desolved for about 3yrs in water how can it be calculated.can I add soda ash and calcium to my soda,the one I Did don't look neat and it became add because I used palm oil

[@MiracleIhekwoaba]

This is beautiful Do you have a special class where 1 can pay for

[@Bamgfoodsdiy]

Yes i do [phone] Whatsapp

[@tadelemosisa7360]

Good soap ,please your catter soap very intersting pleases send your how to cut soap video

[@musaibrahimozovehe1320]

Please what is the quantity of water you used?

[@AshnaskincareAcadamy-rs5ih]

Please the measurement of water that you use 🙏

[@DugboAugusta]

Please can I also use vegetable oil in place of bleached palm oil in this production.

[@Bamgfoodsdiy]

All oils from plants are generally called vegetable oil. Pko , crude palm oil, olive, sunflower, canola, palm olein etc are all . Any soft oil will make u arrive at a softer soap . So check the actual type of oil and check online if is hard or soft oil and the kind of soap bars it produces.

[@DugboAugusta]

@@Bamgfoodsdiy ok thank you very much I actually meant groundnut oil, that's like king's vegetable oil. So I needed you a precise answer from you, either yes or no. Thank you very much My sister.

[@Bamgfoodsdiy]

@@DugboAugusta kings oil is not made from groundnut is a palm olein oil. Look well on the body, is refined crude palm oil that gives u Palm olein. And no. I said the replacement should br a very hard oil or u just work with only pko .

[@aishayusuf5894]

I want the soap to last for more than a year what is the name for soap presavaties

[@BlessingAkpabio-z3j]

Thanks you' and God bless you ma

[@ichieeze2270]

How do I get the mold please

[@florenceolukunle7440]

Thank you so much ur teaching is clear, but i still have issues in mixing, my soap don't come out well pls what happen

[@Culture3600]

Please,how many days do i have to wait for my soap to cure before using it...?

[@christiegibson7834]

Thanks for sharing to us. I love your cutter and will like to buy it.

[@Babylover201]

Can use this measerment in semi hot process b/c tallow oil is not disolver esleay with water.....ma please

[@TeejayKidscollection]

Immediately I put my caustic soda into my PKo it gets adding

[@NkabaSalifu]

Where should I get best detergent for making bar soap

[@MNGG911]

Thanks for the video, can I use this process to make bathing bar soap?

[@OikehEsther]

Thank you so much for this video Can i use groundnut oil in place of red oil??

[@adeolaomolade4753]

Thanks so much

[@IfebuchechukwuMerit-rv7cv]

Thank u for the teaching pleas if am to produce like same quantity with urs how much will be enogh pls help me

[@PhillipsFaith]

Please ma...can i dissolve my color in water?

[@fernandeorelhomme5811]

If you don’t have those what oil you can use

[@ngabosiliver375]

What is important of Titanium dioxide Here how many quantity used??

[@charityesiaba]

I like your partner of teaching , how can l get this type of mould and cutter you are using.

[@HappinessWochi]

I like all your recipes thank you

[@DavidMichael-je4wi]

Thanks for your teaching please can someone use knife to cut her soap and sell it please where can i get soap mould and cutters

[@Bamgfoodsdiy]

Soap mould and cutter available in port harcourt. Full set 65k

[@ngabosiliver375]

Even soda ash must be desolved in 24hours??

[@orngugajohn3230]

Good morning ma please can I add salt for this methods

[@Bamgfoodsdiy]

Haaa

[@Bamgfoodsdiy]

Why will u want to do that ma

[@amakaonwurah5151]

Please how can I get that same mould

[@HafsatAbdulkadir-rw8do]

thanks for this amazing video, pls you write 500g of Soda Ash and sodium sulfate 600g in 1L of but in your explanation you said 1.5L of water, am very confused need your help please

[@Bamgfoodsdiy]

U can use either one liter or 1.5liters U are safe with either

[@HafsatAbdulkadir-rw8do]

@@Bamgfoodsdiy ok thanks

[@kudiratyusuff8642]

Thank you, can we dissolve the caustic with 1.5 litres

[@kudiratyusuff8642]

You said your mould is 10 by 13 inches, what is the depth of the mould

[@kudiratyusuff8642]

What type of soda is good in bar soap

[@chibuikejay8440]

Can use only beef tallow?

[@DugboAugusta]

My sister Biko come and help me, I made this soap today but it's soft and it's bringing out oil.what should I add to rebatch,or how do I rebatch it.

[@Bamgfoodsdiy]

Whatsapp [phone]

[@DugboAugusta]

@@Bamgfoodsdiy I have chatted you on WhatsApp but you are not online

[@nattimbamiria111]

This is great THANKS

[@mercyigbe2860]

Ma, how about using cold water costic soda and canel oil won't it come out fine?

[@kudiratyusuff8642]

Can we use this measurements for hot process

[@tammygodson]

Good morning, please this ia question for liquid soap production. I made 50litres of liquid soap but it isnt foamy. What can i add to make it foamy?

[@Bamgfoodsdiy]

Dissolve 1kg of sls and add to it

[@tammygodson]

@@Bamgfoodsdiy okay thank you. To be sure, just SLS? Cause someone told me to mix texapon, sulphonic and foam booster. Please I just need clarity cause I'm confused.

[@olaniyiolanike89]

Those ones will cause you a lot, try the SLS that she told you cause its also a foaming agent.

[@tammygodson]

​@@BamgfoodsdiyI got a notification that you responded but I can't see it

[@FORYOURGLORYJESUS.]

​@@tammygodson,all those will help, the person is being cost effective for you. You can just take each in small quantity and mix.

[@meshackwachiuri566]

Is it a little too much of the alkalis? 500g

[@Bamgfoodsdiy]

U can as well drop ur soda ash Or dont use it. It will still come out

[@aliceoshioke2729]

What is Tallow oil?

[@dieseephuis]

It's animal fat, e.g. Sheep or deer.

[@Babylover201]

But it's can not disolver esleay with water or can use semi hot process

[@GloryIkhifa]

The soap is fine. I like how you are doing it

[@GloryIkhifa]

Pls your number pls

[@ExcessBlessing]

Thanks

[@ngabosiliver375]

Hi Here in this recipe did you use sodium sulphate??

[@Bamgfoodsdiy]

Yes

[@sundaybose8673]

Pls, how much is the cutter?

[@florenceolukunle7440]

Pls ur phone number ma

[@adabaraeneye3563]

Pls what type of fragrance is suitable for bar soap

[@Bamgfoodsdiy]

Any undiluted fragrance or diluted. There is actually no type in fragrance all has different makeup. Lemon is not same with maybe lavender. They all have different makeups

[@omoneakin-adebayo6354]

Thank u ma

[@zitanjoku1688]

Nneoma , ur teaching is cool and understanding Bravoo ❤.

[@zitanjoku1688]

Ma, what measurement of water used for sodium sulfate 600g because u used 1.5 liter for soda ash 500g

[@Bamgfoodsdiy]

Both are in same solution not dissolved separately

[@OMANIA2024]

Ma your location