Try changing the Hydraulic Couplings for Proper New Holland fittings, had problems in the past with cheap couplings not allowing the plough to turn over.
@NorfolkFords11 ай бұрын
I have got some better couplers lines up ready. I think I will make the difference for the clod cutter for sure. That keeps blowing the pipes out
@DJC99511 ай бұрын
Hi Lewis another handy bit added to your fleet be interesting seeing the clod cutter Thanks again
@NorfolkFords11 ай бұрын
Glad you enjoyed it. I'm keen to see if the clod cutter is all its hyped up to be. Anyway it looks cool!
@willyfindlay439811 ай бұрын
Never seen a clod chopper. Many years ago i met the widow of the Original Mr Dowdswell. Have fun with it.
@avafw6011 ай бұрын
Hi Lewis As you can see from my profile picture we too run a 5 furrow Dowdswell plough with a Claydon furrow cracker. Ive got to say when we first got the furrow cracker i was apprehensive, but for us it turned out to be absolutely great. We no longer need to power harrow unless the headlands are baked. It also gives you great guidance to see if your plough is running level and parallel to the ground. Im sure you will love it eventually 👍
@NorfolkFords11 ай бұрын
Thanks for that. Those little tips with make a difference when we finally hit the soil. Cheers
@knockschool11 ай бұрын
Got a DP7b wouldn't turn over, changed the main turn over shaft and bushe's, worked fine after. With the worn shaft the turn over ram was snapping the pin at the top of the headstock as it's not supported both side's, was able to buy a kit called a bridge link, which when welded on supported the pin both side's. When you tried to turn the plough over at the end of the vid, that looked like a valve problem. My plough would turn some time's and other times get stuck half way causing the ram pin to snap, check the main shaft for wear, but it look's like a hydraulic problem as the plough doe's not attempt to turn over.
@NorfolkFords11 ай бұрын
I've had the block apart since this video. The pressure adjuster screw is snapped so I will be getting that changed. Currently with that screw removed it will turn over is I flip the lever for the spool as I get half way round. I will have it sorted soon
@ianhaggart143811 ай бұрын
I always know Downswell to produce heavy implements.. like for like that is... 😅... Good looking bargain any way 👌.. stay safe 🏴 .. ps cracking work on the vid and TMs are hell of a tractors especially the 190s when they are A1..
@NorfolkFords11 ай бұрын
Stay tuned mate. I'm looking forward to getting it tidied up and working. Not long now I hope
@swblandyman11 ай бұрын
I’m sure you are aware, but AgriHire at Claydon Ipswich bought the Dowdswell ploughs and now make them under another name, I’m sure they would assist if your stuck.
@NorfolkFords11 ай бұрын
I knew they were connected. Thanks for the help I will give them a ring
@alanchatfield427111 ай бұрын
On top of the rocker cover for the engine on the TM you will see it says 168hp and that even without the intercooler that some had,, and to be honest it's probably way way more that the quoted power of 168, I would say maybe even close to 200, so 170+ on the shaft
@NorfolkFords11 ай бұрын
They are incredibly powerful for such a light footprint. I'm really pleased with the tractor. A very good tractor!
@alanchatfield427111 ай бұрын
@@NorfolkFords yep they are brilliant, they would still sell brand new if they were made today, the genesis engine was bomb proof,, just keep and eye on the water pump bearing as when it fails normally the fan falls in to the radiator
@Valtra-Power-Stolarczyk10 ай бұрын
Problem tkwi w zaworze hydraulicznym pługa
@nickaf526211 ай бұрын
wheres the skims
@NorfolkFords11 ай бұрын
Previous owner took them off. I will be fitting them back soon