WD 40 works also very good as lubicant to avoid cloggig up the burr bit on aluminium.
@LBCAndrew3 жыл бұрын
Good call on repeating the eye protection thing. While i typically dont wear a full face mask, i do wear Dewalt goggles now after a piece of metal managed to go between the frame and my upper cheek of a nice pair of normal 3m glasses i used to use. Didn't really notice it at first, then the next morning i could hardly open the eye. Cost me about $400 to get it removed, and only that little because i paid cash. Those of you who don't wear adequate eye protection are going to love it when the doctor puts your eye in a special clamp which prevents you from blinking. its a blast.
@MaturePatriot5 жыл бұрын
Very nice burrs. I was surprised at how well they did in the stainless. Great tool review video.
@doubleboost5 жыл бұрын
I was amazed how they cut stainless
@BedsitBob5 жыл бұрын
Isn't it annoying when the ghost of a welder sneaks into your workshop, in the middle of the night, and welds on you table? 😀
@perr1don5 жыл бұрын
Thanks for sharing John, you could help out at your local dentist?!!
@glenncpw5 жыл бұрын
I find that the tool reviews you do were not on here I would not know of these things, ( I have ordered the burrs, by the way) Keep up the good information.. Cheers
@bostedtap83995 жыл бұрын
Fit for purpose. Thanks for sharing John.
@daveticehurst41915 жыл бұрын
John, you have me hooked, have just ordered a set for my use here in Adelaide Australia.
@chrishill62765 жыл бұрын
Hey John. Bought a pile of these burs about three years ago straight from china. I bought five of each type because at four bucks each i thought i would kill them pretty quickly. I use them often and hard and no lube.nearly all are still in their packets. Really only killed one in that time.
@WaschyNumber12 жыл бұрын
Tungsten tools are very thorough.
@bcbloc025 жыл бұрын
Better than the harbor freight ones that is for sure!
@geoanth5 жыл бұрын
They look the business John, just ordered a set
@AmateurRedneckWorkshop5 жыл бұрын
At first I thought I had lost track of the day and it was Sunday already. Then I noticed it is not a nightcap.
@Stefan_Van_pellicom5 жыл бұрын
I didn’t know these things bite so hard in harder materials like steel. Learned new things here.
@949817453 жыл бұрын
Just look at mohs scale of hardness mate. These carbide burrs are 9 on a scale of 10. Hardened steel is rated as 7-8, so of course these things will cut through.... Just research the hardness of the materials you’re working with and the principal is that the harder things will cut the softer things.
@britishreaction545 жыл бұрын
Cracking honest review. I have to admit to being very pleasantly surprised. I thought they'd be poor. Very impressed with the performance. Especially on stainless.
@doubleboost5 жыл бұрын
They suprised me
@llionellis5 жыл бұрын
Another set bought. Never had a problem with Banggood. I've always found their goods fit for purpose
@geordienufc31325 жыл бұрын
They seem to work quite well. Gan canny.
@fredchevalier23332 жыл бұрын
Great video! Link says product discontinued but thanks for sharing
@ypaulbrown5 жыл бұрын
Hello John...loved the safety tip at the end...I use a welding hood as the replacement lens is so much cheaper and flat so it doesn't distort the view with pesky reflections, also you have protection from below as the hood curves in real nice... again...thanks for a great video... PB
@mrmidnight323 жыл бұрын
Have you tried diamond coated bits?
@youngmango45083 жыл бұрын
This video is SO convincing. I will definitely be purchasing some of these
@artvandelay93743 жыл бұрын
Nice rip at 2:43 !! Outstanding sir 🤘🏼
@politic173 жыл бұрын
Thank you very much
@icebmwpower2 жыл бұрын
Great review John. 👍 *Could you please post a new link, cause the one from the description in broken.* Thank you in advance
@petar4435 ай бұрын
I have rusted bolt in the exhaust pipes. I need to grind the rusted bolt head. Is it safe to use these burrs on a corded drill - "DeWALT - DWD014S-QS" its 550Watt , 2800 RPM no load. I risk destroying the drill because it's not made for side loads i heard. Please answer. Thanks
@Bob.Stoddard2 жыл бұрын
Great video. I'm about to buy a new die grinder and some bits. Your vid helped me a lot. Thanks So much!
@roeng13685 жыл бұрын
I remember years ago being sent out at work for a set of these and the price was crazy, and they were only hss ones. These look good. What shank diameter are they ?
@doubleboost5 жыл бұрын
6 mm
@BestUserNameUK5 жыл бұрын
Dormer ones still cost a fortune.
@laurencefelton30222 жыл бұрын
Hi John, thanks for the review. Those ones are discontinued, so you might want to update the link to the replacements?
@grahameblankley38135 жыл бұрын
Thanks john very good review, will be ordering them & good advice on safety, watching from Coventry.
@olhemi15 жыл бұрын
😎👍 Nice job John
@Dziko3 жыл бұрын
Pferd 1225/8 Z3 plus - the best cutting bur!
@jcs63475 жыл бұрын
Thanks John, I ordered them!
@EverettsWorkshop5 жыл бұрын
I used to use carbide burrs like this in the auto shop a lot, but they were always very expensive off the Snap-On truck. I think I'll order a set, they seem to work well!
@chrishill62765 жыл бұрын
Everett's Workshop i have american made ones as well. These are just as good. $4 as opposed to $40-50 here in oz
@TumpaTalapatra3 жыл бұрын
Are they still sharp.
@steveclark..5 жыл бұрын
I'd like a set of these to fit my 240V Dremel tool, but 6mm is way too big for it's collet system.
@horkinyorkin5 жыл бұрын
thanks for the test. I ordered some.
@ypaulbrown5 жыл бұрын
I think I read that 80% of all carbide burrs are made in Ireland???? Great video John... PB from USA
@selhibsr93773 жыл бұрын
Thanks ...it use necssery the oil in grinding work ? Thank you
@pauldensley54595 жыл бұрын
Hi John, just after some additional and replacement hand files, have you done any reviews? can't fine via search. Is there any brand you could recommend? I've never bought any, they came from work. Bellotta, Stubs and some just marked with an n. They have been good with regular carding but just coming of age 30yrs +
@ronin999992 жыл бұрын
Hi john .the link is not working showing 404 error
@paddrivers5 жыл бұрын
Pretty conclusive. Thanks.
@samrodian9195 жыл бұрын
I'm very well impressed with those John. You gave them a good work out and as you say they look as good as the expensive ones. I will be buying a set! Well I would buy them if I could find the bloody link! Can anybody help me?
@Lmr69732 жыл бұрын
The mig weld wasn't the only nasty thing there! Lol
@saymyname30972 жыл бұрын
What lubricant are you using to keep the tool from clogging?
@doubleboost2 жыл бұрын
WD 40 or kerosene
@saymyname30972 жыл бұрын
@@doubleboost thanks John, my tools were slightly clogging up when I used cutting paste.
@MrBat0004 жыл бұрын
what type of fluid do you use to cool it down?
@matthodgson52235 жыл бұрын
Where's the link to buy these? Great review John 👍👍👍
@doubleboost5 жыл бұрын
video description box
@ysgolgerlan5 жыл бұрын
Nice review, did I hear a fart at 2.44. Thanks for all the effort you put in to make all these videos.
@jef____40545 жыл бұрын
That be there some bloody good testing John..!
@peterdriver47605 жыл бұрын
I have a set and they are good
@micjubba7093 жыл бұрын
Lovly mate
@dreadknot22383 жыл бұрын
all i heard the guy muffle and the carbine drill.
@mealex3035 жыл бұрын
Ohh I've missed that intro
@tosh91205 жыл бұрын
Good review thanks. Now you have the task of cleaning all that “ glitter “ from every corner of your workshop and clothes..
@jonathancortes90052 жыл бұрын
I wore my ppe before watching this videos.
@wuwtools97683 жыл бұрын
In China, this kind of packaged product is of the worst quality. It just so happens that the quality of our rotary file is the best in China.
@andrews59264 жыл бұрын
2:42 lmao
@alcastro94223 жыл бұрын
Fart at 2:45
@tomlocke28056 ай бұрын
2:43 💩
@llionellis5 жыл бұрын
Another set bought. Never had a problem with Banggood. I've always found their goods fit for purpose