Baofeng T1 demo and programming ham radio

[@steredz]

Thanks for a great review. You convinced me to buy one. I did however have a problem reading from the radio at first. I did find that you need to choose (File),( New) before reading from the radio for the first time. Hope this helps anyone out there who may be struggling with the same problem. Thanks again.

[@timeknight1]

Thanks for your time Chris- As ever all good quality.

[@RingwayManchester]

Nice one Chris, strange little radio but I like it. Very different to other Baofeng models. Its annoying how the usual Baofeng connectors aren't compatible. Sound quality is pretty good, was handy you had a mate waiting on the repeater for you too. Cheers for sharing!

[@shahram72]

Dangit. I just ordered this. Have the analog cable already. I'm sure this new cable will cost more than I paid for the radio.

[@jaycee7594]

I'm surprised you don't have one of these already Lewis!

[@Elfnetdesigns]

I noticed a few quirks about these radios in the States: #1 - The batteries do not seem to hold up well, even when the radio is turned off something drains the battery down.. #2 - You MUST reprogram these when you get them however I have come across places like Applebees and other businesses using them on the factory set test frequencies.. #3 - Yes the volume is too loud. I went in mine and put a resistor inline to help make it lower. #4 - I have seen people using these in FRS channels here in the states which would be fine post 2018 however these radios have no FCC certifications and no FCCID on them which in turn makes them an illegal radio transmitter in the US on any band now.. So they are virtually useless here even for Ham radio which is dumb IMO. #5 - In bench testing I found the radios I have operate best between 460 - 468 MHz. this is where theyr TX power is greatest and RX sensetivity is best at least in the units I have received which illudes to suspicion baofeng trying to market them for the part 95 and part 90 bands but the FCC didnt approve them.. They do work fine on 440 Ham but the sensitivty is weakened and the TX power is also lower.. I do believe baofeng actually made this radio to try to get into the PMR / FRS radio market because by design it does meet the requirements except it is not hard VCO locked to channels like a proper FRS or PMR446 radio. baofeng does now however make certified FRS and PMR446 radios and they have a new product list that includes FRS and GMRS (for the US) that allow digital texting and GPS and operate at 2 watts on allowed channels.. They are also planned to be low cost but not yet available to the general public yet, not even for youtube review and testing.. guess they are still working out some kinks or waiting on the FCC to stop dragging ass on approval.. I suspect Trumps trade war is holding things up also.

[@digitalanaloguehamradio]

ElfNet Designs yes well spotted this is a cheap and nasty radio it works but money would be better spent on a standard UV5r but the size and cute design has something going on prep

[@Elfnetdesigns]

@@digitalanaloguehamradio They remind me of General Electric locomotives.. Built to a cost, They do the job as intended but may not be the best quality..

[@maggiemaggie157]

Just got my Baofeng from Ebay. Went to test it out as in your video and discovered that it won't read or write. The cable I'm using is the Baofeng "USB charging cable" - according to the user manual. It definitely does charge. Is there something different about the programming cable that makes it distinctive? The ones I look at online look virtually the same as I have!

[@permanentlypatriotic]

Any chance you still have the driver for this? Your drive link is not working.

[@grzegorzp.5734]

As one can see at 11:57 this mini radio has a memory of 20 channels, not just 16, as it was said in the first part of the video.

[@sklise1]

agree on the cable. Advise or put one in. Surprised Im in the house, and can hit repeaters pretty close. The audio is annoying a bit, but good for in the pocket (haven't tried the headset yet).

[@Two-Old-Travellers]

Don’t know what the output power settings are, but with a non removable antenna I wonder if you could use this as a PMR446 and program it for the New 2020 allocation of channels 17-32

[@danielburch6291]

Hey Chris can you shoot me a link to download the software I clicked on the one on your video and it didn’t do anything

[@SolidSnakeAce]

the link for prolific driver does not work

[@thra5herxb12s]

I tried to use a data cable that came with an ipad, but the BF programming cable has got some kind of chip built into it. This chip needs the Prolific Driver pt 3200 to read it. Just found that out.

[@johnmichaelmalulan4955]

Is BF-T1 compatible with BF-888s? How will you program the frequencies of BF-T1 to BF-888s? I tried it using its required programming cable but it doesn't work. I just copied the frequencies of BF-T1 and write it to BF-888s but it won't work. Please help me. Thanks.

[@slamdunk58]

Does anyone know where to get the driver for the BF T1 software cable? The link here doesn't lead anywhere. Thanks

[@sthanlierayos1955]

up, I need it, thanks in advance.

[@jamesmcgowan7462]

I had problems programming this radio. I used the 9100 software. No matter how hard I tried it would not read or write to radio. I removed the battery and hooked it up to the USB and it worked no problem

[@digitalanaloguehamradio]

Good work around. I don’t have the radio anymore. Thanks for watching

[@felekb1]

Funny thing: At the bottom of the programming software, it says "Frequency Range: 136-174 , 400-470" I guess they designed it to be dual band, but antenna doesn't match at 2m...

[@digitalanaloguehamradio]

Just a quick update guys. The radio works fantastic on uhf. I can hear a Repeater on VHF 10 miles away. But I can't open it because the built-in aerial is totally awful for VHF. So I think it has the capability but not the aerial. I have heard these have the same board inside as the UV3R

[@PhilBailey]

Perfect demo, wow! Very impressed

[@erlonbr]

Obrigado ao video, gracias a você consegui configurar o meu radio t1. Valeuuuuuuu.

[@pradovisk3033]

Erlon BR o seu é dual band tbem? consegui memorizar VHF e UHF

[@quentinbush]

My horrid pc doesn't recognise the plug in adapter, makes the usual ping noise but after that, I am lost. It won't let me install rar file.

[@neilfulcher9298]

Hi nice review, thanks for spending the time to do it. Shouldn't you be setting the channel to narrow 12.5k for UK repeaters?

[@peterthinks]

I have the same radio, same cable and software but when I try to enter a frequency it changes when I hit enter. For example I enter 165.4910 and after I hit the enter key it changed to 165.485 so it seems to be rounding off? Is this normal?

[@ppcedillox]

Hello Chris, im from Mexico City and i jut get two of this little radios, they came with the cable and little dvd wich is completly in chinesse so i cant use it, so i tried with the software and drivers you provide in the link, but i still cant get the radios to comunicate with my pc, do yo know about some other drivers that i can try? Thanks in advance for the help you can provide me.

[@digitalanaloguehamradio]

Pepe Cedillo hi mate. The wire that comes with it is for charging only. You need to purchase the programming cable separate. You wouldn't believe the amount of people that have asked me the same question. I cover this in the video lol.

[@ppcedillox]

Chris Andrews It came with the special cable the one with the dongle and the small dvd.... Actually when I conect the cable the PC does the connection sound.... But when I conect the radio to the cable it just won't connect

[@cesararenasdiaz5285]

Hola Pepe, acabo de adquirir los radios, sabes cuánto tienen de alcance? Y sabes si pueden escanear canales cercanos?

[@ppcedillox]

@@cesararenasdiaz5285 hola cesar 3l alcance es corto cuando mucho 2 kms en plano y sin estructuras y el escaneo de frecuencias no lo he probado, son geniales para acampar con amigos o para cuando vas en caravana

[@leedh1442]

thanks Chris, By virtue of you, i can change the channels. very thank you

[@digitalanaloguehamradio]

Lee Daeho that’s great Lee. Thx

[@Dave2108]

well that was nice and simple to do. my other radios ive struggled with the software and com ports. Still not sure how to start the Scan Mode. And the volume level is very loud. And why does it always start at MAX Volume when you turn the radio on ?? Quirky radio. I only bought it because it was cheap. The battery and cover where a pain to fit. My cover kept popping out at the base. The side rubber cover keeps flopping open. Also slightly annoyed that is didn't come with a cable to program it. had to wait 4 weeks to use it. The CD rom doesn't seem to have the software to program it. So glad i found this video and the link to software. Work like a charm. Man that volume is loud even set to one bar. Think i just woke up the whole road. !!

[@digitalanaloguehamradio]

Dave Blank Glad you got it working look through the comments there is a moment to adjust the sound loudness on minimum. I talk about it in the questions and answers video which is my most recent video. Hope that helps

[@Elfnetdesigns]

Struggle with COM ports? The USB com ports are all virtual you can literally set them to what you want in the hardware manager.. if you have the proper drivers and non bootleg cable it all should work however windows is funny about some stuff..

[@ronnizag]

Does the handsfree are capable of being microphone apart from the handsfree operation? Thanks

[@86Smally]

Hello I need some advice please, if I want to use a radio to be used from upstairs to downstairs in a house to aid a disabled relative who can not shout if need anything would you suggest using this radio as the price is £20 for 2 which is good, also would I need to program them just to talk between each other? It would only be like to signal need help to get up to the bathroom or to bring a drink up etc. Please someone reply

[@digitalanaloguehamradio]

I would not recommend this this radio. I would get a couple of pmr446 radios if you are in the UK or a couple of family radio Services radios if in the USA

[@86Smally]

2E0UKH Digital Analogue Ham thank you for your help mate 👍

[@juanjoselahozalcaniz2437]

I wanted to ask a question, the cable that comes with the charger is the same for programr?

[@jaredira8377]

you probably dont care but if you are stoned like me atm then you can watch all the new series on InstaFlixxer. I've been streaming with my brother lately :)

[@orionsonny3220]

@Jared Ira Yup, have been using instaflixxer for since december myself :D

[@jadielemmanuel5514]

@Jared Ira Yea, I have been using InstaFlixxer for since december myself =)

[@FntSquall]

hi, i don't understand why i have to leave the moni / vol key to receive when you don't, should i program it?

[@wingsonwheelsadventures799]

Hi Chris, thanks for the vídeo!just one question do think is ok to use that radio for hike/mtb due the size of it? And which is the average range for a outdoor use? Cheers

[@digitalanaloguehamradio]

Rafael Henrique I have not done much testing. But sitting in my car now at work I am opening a Repeater over 15 miles away. I think it would be good for hiking because you can charge it by USB. And if you take a power bank you're just sorted

[@digitalanaloguehamradio]

Rafael Henrique but there again you can't program it from the radio you need a computer

[@wingsonwheelsadventures799]

Thanks Chris that sounds good to me! Cheers

Hi Chris, The software can not communicate with the radio. Is the programming cable a special cable or is it a normal mini USB cable? Thanks for your answer

[@digitalanaloguehamradio]

Cédric Fauchon The cable is the same as an android charger micro usb. Bought separately. The one supplied is for charging only

It's amazing, a special cable for programming !!! What a funny idea ;-) Thank you for answer

[@alanstevenson7402]

Only thing let's radio down is the antenna, G6LSW

[@lukassembol7542]

Hi, folks! Has anyone an idea why are there two strap holes? Can't stop wondering about this...

[@jaycee7594]

Great video mate. A little bit different from the usual Baofeng.

[@w1oes]

Its a dual band radio I just can get it to work on VHF repeaters it might be just mine I have 2 more coming today so I will let you know.

[@nasi_goreng]

hi chriss thanx for great demo. I have one pair of t1 trying to use it as baby monitor cuz it has vox function but even with headphones i couldn't do it at the most sens lvl is "1" i think the mics are not enough to activate vox. But when i keep transmitting i can hear every tiny background sounds from transmitting radio. Am i missing something?

[@digitalanaloguehamradio]

Hi mate it sounds like you are doing everything correctly it's probably just a gimmick. On all other radios you just activate the Vox feature and when you talk talk it will start transmitting.

[@nasi_goreng]

Chris Andrews :) than what s the purpose of the vox on this radio. İt s totally useless function

[@carlomarchese8480]

I also try with different pc and Sistem Op.(XP,win8,win1o) but the response is aliready the same I think that the problem may be the data cable broken,i want to ceck the cable with pin out data

[@sergeyfilippov6287]

Hi Chris! Can you change "Wide \ Narrow" (menu item # 14) from the menu by pressing UP\DOWN arrows? Thank you!

[@digitalanaloguehamradio]

Sergey Filippov when I go into the menu it won’t move from wide

[@999monkeymonkey]

can u alpha numerically store any channel names or is it frequency only?

[@ahyonvlogs]

What is its farthest range if not undergone a programming like that?

[@digitalanaloguehamradio]

2 miles if u lucky. I prefer uv-5r . Which is programmable from front

[@nmsports5406]

Hey dear bro i have a problem... My device stuck on channel 1, please tell me how to formet the device

[@fotoamgamgfoto3695]

HI! Is it possible to program this radio for Airband? 118-132Mhz AM ?

[@abrosc]

hi mate, great vid by the way....cant seem to link into the prolific driver, can you send again or post it back in a reply...Many thanks. Pete. stoke on Trent

[@digitalanaloguehamradio]

I’m afraid my Google Drive storage dried up. But you can get it from miklor.com. Thanks for watching Pete

[@abrosc]

@@digitalanaloguehamradio great job mate, many thanks...keep up the filming mate...learning a lot

[@digitalanaloguehamradio]

@@abrosc That’s great to hear and you can join the Facebook group with the same name I will look out for you there

[@digitalanaloguehamradio]

The radio is 1watt output

[@SuperKicx]

sir chris can you send me a screenshot on your programming cable pls..

[@digitalanaloguehamradio]

SuperKicx I took a snapshot there is no way to send it to you. There are tons of these cables now on eBay. Search baofeng t1 programming cable thx

[@enzopulido529]

How many km in range?

[@reneruurda3231]

Hi Chris thanks for the video..I'm having trouble to connect the radio to my computer. I use the original cable and the software does see the virtual com port. Still, when I try to read or write to the radio there is no connection possible. Strange enough the radio reset when I try to connect so there is some kind of connection. I use windows 10 and already tried the additional drivers for 64b but since the comport is visible I guess this is not the problem. Any idea?

[@digitalanaloguehamradio]

Rene Ruurda Do you have the programming cable that you purchased separately. The One shown in the video with Baofeng written on

[@reneruurda3231]

Chris Andrews hi..yes :)

[@digitalanaloguehamradio]

Rene Ruurda you need prolific driver and the correct software. The correct programming cable and Radio switched on. You may need to try different USB sockets on PC. And in the programming software try different com ports. You may need to going to device manager and check it is in the prolific driver and not reverting back to the old one that Windows finds

[@mimusar_]

Rene Ruurda Bb bb

[@janismateuss]

Hi, the driver link is broken. Can you please update the link? Can't find the right driver anywhere, this one worked before.

[@digitalanaloguehamradio]

I don't have the radio anymore sorry. I don't know what happened to the driver. But I remember getting it from miklor.com

[@janismateuss]

@@digitalanaloguehamradio Thanks!

[@danielburch6291]

When I click on your link it says no preview available

[@hmleeds72]

When I am trying to program this it keeps coming up saying serial port open failed. Check whether the serial port settings are correct..can you help

[@digitalanaloguehamradio]

Sorry I don’t have the radio anymore

[@hmleeds72]

Figured out

[@fabio7544]

hi Chris Andrews, can you explain or let me see step by step how do you recognize the T1 radio on PC and the connection phases? meanwhile I'm complimenting you for this video

[@digitalanaloguehamradio]

Fabio Lycos The entire process is shown in the video nothing else

[@fabio7544]

Chris Andrews thank you. but does it need a dedicated connection cable, or is it okay the usb cable I use with the charger?

[@digitalanaloguehamradio]

Fabio Lycos Of course that’s what the videos about. I explain that the One that comes with it is for charging only

[@fabio7544]

Chris Andrews sorry if I did not understand but I do not speak English well. Since the cable is a normal usb cable, I followed the procedure you described. I inform you that I have Windows 10 and the program does not see the radio. after installing the "prolific" drivers and going to control the only COM port I have, I know drivers have not been plugged in. I tried to force the installer to look for the path to the prolific driver file, but after installing it, the yellow error triandle remains on the COM port. Three days I do not understand why the prolific driver is not properly installed.

[@digitalanaloguehamradio]

No problem my friend these drivers in the link r for Windows 10 64-bit

[@verschalter]

Cheers Chris. Tnx fer all ur info. I can not find the programming cable on ebay. Could u pse post a link to the propper cable?. tnx es vy 73 de DM5TU sTef

[@verschalter]

Found it...so for all the others here is the link: www.ebay.de/itm/USB-Programing-Cable-With-Software-CD-For-Baofeng-BF-T1-2-Way-Radio-New-/302434262214

[@digitalanaloguehamradio]

vErschalter www.ebay.co.uk/i/272829849883

[@verschalter]

TNX Chris!! 73

[@conservativestatesofamerica]

Are they an updated link the first one no longer works?

[@digitalanaloguehamradio]

Sorry, this is quite an old video. The link has expired. It’s worth looking on. Miklor.com

[@KandiKlover]

Awwww it's soooo cute!

[@84bobol]

can I programm without cable ? I have only one frequency and I dont know what i can do.

[@bonyhardian7]

You should try BF888S with 16 default channel.

[@RezaOLine]

can you do scanning with that..??

[@EchoFiveNine]

Is there a software for mac? Thanks.

[@Mizaru_channel]

Hi everyone! Where can I download a win7 driver?

[@nczw]

how to set ending beep?

[@tophypes1180]

when you unplulg the battery, would it reset the program you made?

[@Elfnetdesigns]

Yes you totally loose everything because non-volatile memory is not a thing in the 21st century.... - joking of course - No you will not loose your programming..

[@VykersTechTips]

its a micro usb cable not mini usb... ^_^

[@joeshupienis4388]

It's a USB "C" the latest fad!

[@Elfnetdesigns]

@@joeshupienis4388 No it's not a C. it's a 5 pin USB Micro with all 5 conductors connected. I did my research and reverse engineered the cable when I got mine. The 5th pin is connected so the radio enters programming mode the pins that would normally be USB data are reversed and used for rx and tx data from the onboard USB data converter in the head end.

[@gowerdave]

You were transmitting on Low Power btw.

[@alvint4944]

May we know how to switch it to High Power?

[@jirisatelitakxy7718]

Where is the cable ???

[@ezradwaynemagno]

mine wont be detect by the 9100 software. usb programming cable is detected but not the radio... pls help

[@digitalanaloguehamradio]

ezra dwayne Magno you need the correct programming cable as shown in the video. And you need the correct driver. I have supplied the software in the video in a Google Drive below the comments. If that fails you need to find your own driver for yr operating system

[@ezradwaynemagno]

i have the correct programming cable. i bought it online and it detects my usb as usb-serial ch340 (COM8). and its working fine

[@ezradwaynemagno]

it always said that "abnormal reading and writing etc...check the connections are correct, or walkie talkie power supply is turned on.

[@ezradwaynemagno]

ive been programming other baofeng radios but this bf-t1 really gives me a hard time.. pls help..

[@reneruurda3231]

I've got the same problem..did you figure it out already?

[@Klemlloydcacatianjr7015]

hello please do help me why i cant add the 441.5870 in frequency it automatic encode 441.5800

[@bonyhardian7]

Try CHIRP.

[@radioman4321]

9100 Programming software continually crashes on windows 7. Any ideas?

[@Elfnetdesigns]

run in administrator mode? Try it on another PC?

[@richardowens9061]

Thanks, for the video! Unfortunately, I'm running Windows 10 - so, nothing works as expected. I guess I'll just have to throw the little radios in the trash. The programming software needs a com port - and, Windows 10 WILL NOT LET ME HAVE ONE, no matter what! I've installed the Prolific drivers. I've installed the 9100 software. I've purchased and connected the programing cable and the radio. And, I still cannot communicate with the radios. Leave it to Microsoft to make something that should be easy completely impossible!

[@digitalanaloguehamradio]

You’re not missing much the radio packed up a few months afterwards. Always annoying when you just can’t get one programmed I totally understand

[@richardowens9061]

@@digitalanaloguehamradio I was actually, finally, able to program the damned things. It seems that there are at least three different chip sets for the special programming cable that you need and the Prolific chip set is just one of them. I did find the drivers for the chip set installed in my programming cable and that resolved the issue. But, the time I had to spend on figuring that out was worth more than the cost of the radios. Something that should have been fast and easy took over three hours. Thanks, again!

[@jakecejas1426]

Prolific driver is not available, can you please provide a new link. Thank in advance..

[@digitalanaloguehamradio]

I'm sorry I don't have the radio anymore look in the comments there is lots of help there on the radio. With information

[@lambertinos]

Thanks really help program it. What the repeater fonction the menu i just don't understand this one. I program several repeaters in my area. VE2PQP.

[@carlomarchese8480]

I have a BF-T1 but i have a hard problem,when I try to programmer it with the pc connection ,the 9100 software when I try to read or write data on BF-T1 ope a popup and tell me :Abnormal reading and writing ,check the connections are correct or walkie-talkie power supply is turned on!,but the connection is by original data cable and the BF-T1 is charged on power off,if someone have the possibility to help me ....

[@digitalanaloguehamradio]

do you have the propper cable.the supplied cabe is for charging only.

[@carlomarchese8480]

I have two cables one for charge and one for data

[@26jetro]

same prob here carlo, thats what it also says when i click the read data though im using that dedicated cable and followed the video, please give me a feedback if you figured it out or how you solve it if you had. thanks'

[@paullaunder423]

Do you fine it drains power over night while turned off ?

[@digitalanaloguehamradio]

Paul Launder Not particularly. I have only charged once. And it has gone down. Month later It’s still working

[@paullaunder423]

i brought a new one used it a couple of time but when i do its flat and doe work on both bands when programmed with them

[@John_N_M]

Just letting you know that I tried to download the driver software off the recommended link shown above. The main issue that I have been having is that my antivirus software has decided that this software is a threat and decided to delete it for some reason.

[@yairgolo10]

To switch frequencies, you need a computer? Or is it possible without a computer?

[@mpoerot8013]

0:49 pretty sure that's a microusb. over

[@digitalanaloguehamradio]

Roger that thx

[@danielcc7607]

the driver is gone... can you put it back on?

[@digitalanaloguehamradio]

My Google Drive has expired but don’t worry it’s readily available on miklor.com

[@thothunter8626]

Can you post the links to the driver and software please

[@digitalanaloguehamradio]

I’m sorry I don’t have the radio anymore and the link died. Join the Facebook group baeofeng Radios and ask on there

[@sandram.borges3807]

love this review helped a lot

[@digitalanaloguehamradio]

Sandra Borges thanks Sandra I’m glad it helped you. X

[@dooronron69]

how far away was the other person you talked to.

[@digitalanaloguehamradio]

He was a couple of hundred miles away. That is going through EchoLink. If you’re asking what the range is I have had conversations on Repeater 20 or more Miles away

[@dooronron69]

Chris Andrews Thankyou for the reply and video.

[@mrbryan26]

used nasa repeater distance is mars to earth

[@angeliedimaranan5142]

good day sir, should I buy programming cable or can I use my cellphone's data cable?

[@hwhankins]

You have to have the programming cable. While it's a micro-usb connector the pin usage isn't standard usb so the cellphone cable can only charge it. If you want to make your own cable the info is at chirp.danplanet.com/issues/4933#note-20 and you can program it with the open source chirp software using it's current daily builds

[@angeliedimaranan5142]

thank you for your response! :-)

[@neilwhitaker]

Hi can you listen to aircraft aviation on this scanner

[@digitalanaloguehamradio]

Neil whitaker no mate.

[@fcf-frequence-citoyenne]

you'r links dont' work :/

[@digitalanaloguehamradio]

Try them again

[@ronn423]

Hi! Can I have a download link for prolific driver win 10 64bit?

[@digitalanaloguehamradio]

Ronaldo Trinidad www.miklor.com

[@jesussaves3981]

thank you! but the driver link is dead. could you e-mail it to me? thanks.

[@digitalanaloguehamradio]

The drivers and everything you need are on this site www.miklor.com

[@jesussaves3981]

i installed chirp but it won't find the radio like the com port is disabled. i installed the driver pack also but it still won't find the radio. @@digitalanaloguehamradio

[@jesussaves3981]

can you put up the specific url on miklor please? the ones i installed aren't detecting the radio still.

[@AzamShaikh786]

Is it licence free?

[@samocooper9070]

really need to get the USB pinout so we dont have to wait for the bloody programming cable haha

[@ahmadtaufiqmohddahlan5413]

i cant locate the comm port..

[@digitalanaloguehamradio]

Do you have the programming cable it is a different cable to the charging cable

[@ahmadtaufiqmohddahlan5413]

@@digitalanaloguehamradio exactly..i got programming cable as in the video..maybe my cable has a problem? But i got beep when i connected that cable..

[@bonyhardian7]

@@ahmadtaufiqmohddahlan5413 Open device manager on your PC

[@michaellalwani9561]

Can be scan

[@axllohse50]

prolific driver link is broken?

[@digitalanaloguehamradio]

All drivers on miklor.com

[@joesaure4297]

driver not found mate

[@digitalanaloguehamradio]

joes aure have a hunt around on this site because they have got them www.miklor.com

[@manuelcalebtorresreyes8673]

Que alcance tienen ?

[@lucifer0001]

Something like this would be great for your passenger to use so he or she can guide you & your 4x4 & help you take the best line & put the wheels where you want them so you don't get stuck or hung up. These radios are cheap so breaking one won;t make you have to wait for that next payday to buy that new upgrade for your rig. I wish that this radio manufacturer would make a fully optioned hand held unit that is a CB., HAM. & police scanner etc. scanner. Kill some boredom by doing some ambulance chasing. This radio/scanner shouldn't be frequency blocked anywhere unless you have to press a factory reset key located in an easy to push location to keep you out of trouble & hook up to a car base for programming & charging. Maybe Baofeng will read this & manufacture some nice equipment for us? By the way, has anyone been able to program the Baofeng GT3-TP radio with Win-10? How about Win.10 & this Baofeng T-1?

[@kalsac79]

Driver link not working please help

[@digitalanaloguehamradio]

cherian kurian All the files are on miklor.com I’m afraid I don’t have them anymore they have expired

[@lifdo69]

Thanks for programing soft.

[@digitalanaloguehamradio]

Great I take it the link still works

[@alicialehoux4796]

what is the output power?

[@Nickkko999]

1W according to the spec sheet.

[@jimmygerilius8494]

Mine does 0.5 W, or 1.0 watt according to manual. Press and hold the ON/OFF + LAMP (about 2 seconds) at power up, and it is 0.5W. Repeat this process again at power up, and it toggles back to 1.0 W

[@isabelapiva5096]

seems like someone got a tinder match haha

[@Josephlandon1]

Tried for hours. Never got mine to work once. I keep entering the frequencies and saving but it just never picks anything up. Garbage product.

[@davidsimmonite9451]

Norton doesnt like that software :-( wont allow it to download to pc!!

[@bonyhardian7]

All drivers on miklor.com

[@pedroseguinot5369]

Thanks...works perfect ...73

[@hyper-novaa]

Finally English review 😅

[@geneg7906]

Hello everyone - I researched the web for the pinout of the micro USB b and found none, I did some experimentation and was able to produce my very own programming cable. It is hard to order ebay on where I am, so I am sharing to everyone the link for this info through my google drive. Hope this helps someone out there : drive.google.com/open?id=0B9KN2telLUlDUGtIYVZPdVF5OTQ

[@digitalanaloguehamradio]

Gene G Good work thx

[@geneg7906]

Your welcome Chris, I also have an advance one, on 4:50 of your video, you mentioned about the loud volume that seems uncontrollable, I was able to fix that, here is a link for that: drive.google.com/open?id=0B9KN2telLUlDLVRMNFc3WlB0cTA

[@Nickkko999]

Thank you for this. I'm going to attempt this mod while I wait for my programming cable to arrive. Quite unbelievable that this radio ships with such ridiculous volume.

[@John_N_M]

Did some more hunting around and found the following link www.reddit.com/r/Baofeng/comments/6w3063/bft1_programming/ this has the English installer that Norton doesn't complain about the link is chirp.danplanet.com/attachments/3699/9100_En_Setup.exe

[@antonioparreira7300]

Very good!

[@Junebreath]

Thanks!