Distances relay Zone Setting | Distance Relay Zone Operating system | Distance protection Basic

Distances relay Zone Setting and Distance Relay Zone Operating system has been explain from basic
Here I have explain step by step Distance protection from Basic
Why we go for zone?
How much percentage we have to keep for each zone?
What is the best timing for each zone?
Why we go for zone2?
Why we go for zone3 ? and
Why we go for zone 4?
You can able to fine answer for this all question.
And also I have show some demo of fault and how the relay will respond for the fault ,
Here I have touched carrier send and receive also not deeply . but I have show little bit.
By seeing this video you can have idea about distance protection

[@thalapathydinesh9523]

Sir I'm newly joined in this protection field, and I have very low knowleg in its. but, yours lecture vedios is very very useful for me sir, thank you soo much sir. Congrats to u sir for this great work

[@baranitech1026]

Thanks and welcome

[@kanailalmondal6040]

It is very helpful for all electrical engineer. I'm very interested to learn about practical based learning.. thanks to you

[@baranitech1026]

I will try make some practical video also 👍

[@ZDTcko]

you are making great educational videos, how come this channel isn't more popular?? BEST RELAY PROTECTION CHANNEL ON YT. thank you very much sir.

[@baranitech1026]

Thank you very much

[@ArunSharma-jk9lm]

Very detailed explanation in simple words.... Thanks for sharing your knowledge...

[@baranitech1026]

thank you

[@vijaysenthilkumar2761]

In case 4 you didnt mention about zone 3 coverage and directly discussing about reverse protection zone 4...can you please explain with zone 3 along with zone 4..

[@baranitech1026]

i will make for you

[@amitpagare5946]

Very informative video 🙏🙏🙏🙏

[@baranitech1026]

thank you and welcome

[@KundanKumar-vj5ez]

Very useful video sir.... please clear one more doubt....by which medium on distance relay sends carrier signal to another substation.... kindly explain in detail

[@baranitech1026]

yes i will make one video for you.

[@durgamoulib5958]

Sir, in zone-2 the setting of impedance will be around 100% line +20-50 % of remote end right. What will we consider in remote end i.e., transformer impedance or line impedance in remote side?

[@baranitech1026]

line impedance

[@chethananand5500]

Thanks for the video.

[@baranitech1026]

welcome

[@ganeshachally4881]

It is very good info. Please explain by taking the example line distance and explain it so that we get it easily pl it's my request

[@lalitachoudhary5201]

Thanks a lot. It helped me.

[@baranitech1026]

You're welcome!

[@kishorek337]

Hi sir. Your videos are awesome. I need your help in configuring RET615

[@baranitech1026]

yes i will make

[@mr.biplob3795]

Great boss, We need weak end feed knowledge pls make tutorial for us

[@engineeringtutorialsandfac2774]

good explanation sir...

[@baranitech1026]

Thanks and welcome

[@MM-ry4ki]

Well explained.Thanks

[@baranitech1026]

Welcome

[@mathavang6329]

Thank you sir for sharing ur knowledge

[@kgs6038]

Nicely explained...

[@baranitech1026]

you most welcome

[@PoonamYadav-ny8rx]

Thank you sir for valuable msg. Pls upload setting calculations also.

[@sagormohammad349]

kindly uload about distance and line differential interblocking video and additional power swing, sotf, vt fuse fail auto resclose

[@baranitech1026]

kzbin.info/www/bejne/mKDQmYGNZs18n7M

[@eraldcela9702]

thank you, very useful

[@baranitech1026]

Glad to hear that!

[@satya7077]

Nice video sir...Can u explain the DUTT, PUTT & POTT scheme in Distance relay???

[@baranitech1026]

yes i will for you. right now i am making bus bar protection video so after that i will make for you.

[@lachkeoelectric256]

yes thanks you

[@baranitech1026]

welcome

[@shazrizvi4343]

Nice

[@baranitech1026]

welcome

[@rjrnjn87]

Zone 4 timing is not greater than zone 3 timing.. as per CEA zone 3 time delay is 800-1000 ms and for zone 4 -500ms.

[@baranitech1026]

yes i have made mistake thank you very much

[@ashokar9135]

Hi can anyone please let me know that REF615J can be used for distance protection

[@baranitech1026]

REF615 cannot use for distance

[@surendrakverma555]

Good

[@baranitech1026]

Thank you

[@rameshkumarnishad2593]

Thanks

[@baranitech1026]

welcome

[@laxmandas1317]

Sir what about zone -4

[@baranitech1026]

rev zone normally 25%

[@prabus3637]

இது emgineering subjevt ah

[@baranitech1026]

yes

[@tufailalam6438]

why do we use two distance relays to protect a signal transmission line

[@tufailalam6438]

@@baranitech1026 thanks for your reply.. But sir i have seen two distance relays are used to protect a signal transmission line at one end of transmission line (sending end or receiving end)

[@rajeshtk1246]

@@tufailalam6438 One relay is chosen as Main1 and the other relay is taken as Main2. Both provide simultaneous protection of the line. It is ususal for configuring main 1 with distance and main 2 with backup ocef protection only, or both relays with all protection activated. The use of two relays is just to have redundancy in protection. Its just an eveolution of line protection philosophy. Earlier, only OCEF was present, then came directional ocef (both mostly in electromechanical form), then with the static relay tech, distance protection came into being. Nowadays, all the above said protection is done with the use of numerical relays.

[@tufailalam6438]

@@rajeshtk1246 ok.. Now please tell me what protection futures are configured in main-1 and main-2 relays

[@SONkidman]

@@tufailalam6438 all protections are enabled in both main 1 and main2 relay. This is to improve the protection as well as reliability of the line. In case if one of the relay gets faulty we can still use the line without interreption.

[@billyambotane5761]

Thank you for this informative video.

[@nitingovil391]

why do we need 3 zone protection of transmission lines??

[@xtranoobie6354]

For we use it as backup for protection

[@nitingovil391]

@@xtranoobie6354 thnks💖

[@nayeemshekh5414]

Please improve the speech quality and pronunciation

[@baranitech1026]

I WILL TRY TO IMPROVE

[@hmjahir77]

you can't explain is clearly.

[@baranitech1026]

i will try to explain in clearly

[@surendrakverma555]

Good

[@baranitech1026]

Thanks