Here I test Alclad Chrome and Black Chrome lacquers. I was blown away by the results. This is some special paint here and I highly recommend them to every model builder. Follow me on Instagram - barbatos_rex65
Пікірлер: 631
@goodguysgunsllc93692 ай бұрын
Just going through your older videos. I have watched you for over 3 yrs my friend! I have an employee I've gotten into the hobby, now he's hooked and ready to order his Barbatos Rex swallowtail! He was asking about chrome. I knew right away to find your video and share it with him! How far we've all come thanks to your efforts! And for that I'm proud to say I'm a patreon and so thankful for all you do!
@emanuelrivera80482 жыл бұрын
I tried this years ago and didn’t know what I was doing, glad to know I needed to perfect it and do it right like your video now I am extremely confident I can finish my project 14 years later hahaha, I was trying to restore a plastic chrome figure defect and the base on the figures was chrome!! Thank you so much!!
@PaganWizard3 жыл бұрын
If you want to protect your chrome, use Allclad's clear coat on top. It will make it a bit foggy, but there is a fix. Apply some 2K automotive clear gloss paint on top of Allclad's clear coat. When the Allclad clear dries, it has a rough bumpy surface, which isn't really visible to the naked eye, and that diffuses the finish on the chrome. You absolutely MUST use Allclad's clear before you use the 2K clear, because the 2K will destroy the chrome paint. The end result is almost mirror like, and it will stay that way for a long time.
@garylai92483 жыл бұрын
How about Alclad Aqua clear coat? Same solution?
@skyrider4789 Жыл бұрын
@@garylai9248 I just saw this and about to use Alclad. Did you ever find out/try this?
@crazyantny9161 Жыл бұрын
Thanks for the tip. That seems to be an issue with all the chrome paints. I give it a try for sure
@hhaste8 ай бұрын
I got that same rough, bumpy texture from Alclad's Aqua Gloss clear on normal paint but I was told it's because I didn't start with a wet coat. Instead, I sprayed a light tack/mist coat, like you would normally do for spray cans etc.. Apparently it likes only wet coats. Areas where I unintentionally sprayed it heavier were definitely smoother. I'll try only wet coats on my next car.
@hhaste7 ай бұрын
To follow up on this, I did only medium wet coats on my next car and it was very smooth. Not sure if all of their clear's should be sprayed like that but I have to assume so. I just got some of their Gloss Klear Kote and the directions also say medium coats, same as Aqua Gloss's directions.
@Seemsayin11 ай бұрын
This stuff is off the chain! Never thought chrome paint would ever be possible. Thanks for taking the time to make this video.
@barbatosrex947311 ай бұрын
Chrome is my specialty. Check out my channel
@Seemsayin11 ай бұрын
@barbatosrex9473 I was messing around with fingernail paint... the kind that you brush on some kind of UV-cured base, and then apply the metallic flake. I gotta admit... it looks pretty good. Only drawback is that it's suitable for small items. Your stuff.... good lord... IMPRESSIVE. Both shades you showed are remarkable. Good stuff. One question... Why is it that these chrome products require a black background? Would it be because black is actually the absence of all color? Thanks for your time.
@kayahm46462 жыл бұрын
Exactly the detailed video I was looking for. Thank you.
@thisrsrsnamect55995 ай бұрын
Thank you for the tip about being able to buff out the chrome. Thank you for what you do!
@ttzombie Жыл бұрын
as always THANKS FOR DOING ALL THESE !!!! All Alclad is perfect. ALL HAIL ALCLAD. Their primer is BY FAR the best primer.
@gundamkris2 жыл бұрын
I've just purchased these 2 chrome's and the primer and can't wait to use them...I found you video very informative and put together great....keep up the good work 👍👍👍
@barbatosrex94732 жыл бұрын
Thanks buddy and good luck, those are great paints
@davidhiscock19692 жыл бұрын
Hi fella. Cheers for your alclad 2 videos. Really helpful. On a side note, alclad 2 paints originated in the Norwich, England in 1999. A factory was opened in 2001 in the USA so the product would be available to you guys. There is a company that is American called Alclad but they produce fully coated cookware products . Easily mistaken for each other .
@CountryBoy10692 жыл бұрын
This company is just down the road from me here in Tennessee. I love their paints.
@NiceMongooseProd2 жыл бұрын
Hey, I just realised that I very frequently watch your videos to help me know what paints works for what I need, but never comment on it. So I really would like to thank you a lot for what you do ! Alclad is unavailable where I live (France) so it's quite expensive to get (about 20 to 25€ a bottle), so you helped me a lot of useless expenses haha ! Thank you very very much for all your work !
@barbatosrex94732 жыл бұрын
Glad I could help in some way 👍
@seetheforest Жыл бұрын
That does look great. I never thought I'd see a paint on chrome look that good.
@reighn831 Жыл бұрын
I always find myself back on this channel when I'm looking for specific paints, haha. Great work man
@barbatosrex9473 Жыл бұрын
Thanks buddy 👍
@M0U53B41T2 жыл бұрын
man that's so gorgeous, you can see your reflection in the chrome for crying out loud!
@bramflakes23923 жыл бұрын
Thanks for the video, I’ve been looking for a decent alternative to Vallejo since it’s so expensive, and the fact this stuff is even better is a win win!
@miisakachan87273 жыл бұрын
Wow the reflective resulting effect is awesome. I was looking for some options for a chrome paint and am thoroughly impressed by what you got!
@barbatosrex94733 жыл бұрын
Alclad is some of the best paint in my collection. I'll be testing more here in a few days. I'd pick some up you'll be pleased with the results. For the record, when I say best paint in my collection, here is my paint collection instagram.com/p/CAbRT9dD6Ie/?igshid=gaza6zc86fbo
@miisakachan87273 жыл бұрын
@@barbatosrex9473 Quite the collection! What's your opinion on Alclad vs Gaia Notes in terms of their lacquer paints? Also, I've been reading that some ppl are having issues with the Alclad gloss black primer not sticking/chipping too easily, have you experienced this?
@barbatosrex94733 жыл бұрын
@@miisakachan8727 I have to say I've never had a problem with their Gloss black base. I also use Mission Model Paints Gloss black base and that's great too. I just got their regular black, gray and white primers in so I'll be testing those soon. Also I just ordered Badger's new Gloss black primer so we'll see how that is. As far as Gaia goes, I like it. Now it's not head and shoulders above the rest, I see it as just as good as Mr Color and therefore prefer Mr bacause it's half the price. Do you have a request for me testing a brand of paint?
@miisakachan87273 жыл бұрын
@@barbatosrex9473 Have you tried Vallejo's Metal Colors lineup? I've seen some pretty good reviews on them, they're acrylic paints however.
@barbatosrex94733 жыл бұрын
@@miisakachan8727 I just got a bunch of the Vallejo Metal colors in. Test video is coming soon
@MichaelRuss20062 жыл бұрын
Thanks for this. I've ordered these. Can't wait to use them for my London bus for the seat frames.
@davidarnds3831 Жыл бұрын
Absolutely Great Demo !
@rija-ss6xj2 күн бұрын
Just finished watching your video on Alclad chrome & black chrome, awesome! You sold me, I'm going to order some today,.
@barbatosrex94732 күн бұрын
Great paints
@fdwsr712 жыл бұрын
Amazing video and workmanship
@animalyze71203 жыл бұрын
I like using the black chrome right on top of my chrome parts in my car models to tone down the bright fake look of the included chrome pieces, works great every time. Great line up these Alclad paints.
@barbatosrex94733 жыл бұрын
These are great paints. Some of my favorites in my inventory. That's a great type, I dont like model chrome at all. I always strip the chrome off my car rims and repaint it chrome. I'll try your technique next 👍
@animalyze71202 жыл бұрын
@@barbatosrex9473 I bought their entire line up just to have in case the company doesn't stick which happens lol. Their Candies are great especially for Car bodies and Gundams, I enjoyed your video on them as I do all your paint videos.
@barbatosrex94732 ай бұрын
Thank you for the kind words, it's very much appreciated 👍
@nathanfreund12273 жыл бұрын
Rex, I need a comparison between Klear and Aqua gloss over all the different paints! Which is worth the money!? You da man!
@normandothegreat Жыл бұрын
That black paint is awesome! Most gloss black paint doesn't cover in less than 2 coats, and being RTS (ready to spray) makes it that much better. 🙂👍
@barbatosrex9473 Жыл бұрын
I use their Gloss Black Base for everything, it's a great paint
@thejudge-kv2jk2 жыл бұрын
I always thought Alclad were English. Looking at the label there is the Union Jack and Stars and Stripes so maybe both or something! They look amazing. Thanks for the video.
@chuchuchip Жыл бұрын
I like these Alclad metallic paints. I use them on my accented bicycle small parts & accessory mounts. There are some clear reds I spray over solid reds that adds depth to to reds. No 2 reds come out exact. There are other clear colors you may create some unique finishes.
@EpicBlargman Жыл бұрын
I tried spraying the chrome tonight for a gundam kit, the chrome ended up looking more silver. Before i spray the chrome i applied alclads gloss black base. Am i doing something wrong or will aquagloss correct this with a reflect glossy mirror effect?
@jamesbunch99643 жыл бұрын
These tutorials are awesome! Thanks.
@barbatosrex94733 жыл бұрын
You're welcome buddy and thanks for watching
@kgee2111 Жыл бұрын
Thanks! Just tried it and it is awesome!
@farrelltyler52242 жыл бұрын
Awesome video & great tips! I've been looking for an application that would simulate polished stainless-steel on an aluminum apple watch. The Alclad Black Chrome looks like it might be a perfect solution. Any experience or guesses as to how the finish would hold up with occasional water exposure: pool, ocean, etc?
@garyjenson8262 Жыл бұрын
After I seal the chrome i put a French ultramarine blue oil thinned with oil medium and oms. I let it sit for a bit. Then I hit it LIGHTLY with a rag that is barely damp with oms. It makes a beautiful blue chrome steel. Very realistic.
@Fattrac3 жыл бұрын
Great video, thanks for posting. Awesome info!
@barbatosrex94733 жыл бұрын
You're welcome, thank you for taking the time to watch
@riccello Жыл бұрын
I lived in New York for 28 years. Now in Houston. Your accent is so nostalgic, makes me feel at home.
@barbatosrex9473 Жыл бұрын
Nice to know my Italian Rhode Island accent brings to mind your memories of home
@riccello Жыл бұрын
You sound like a New Yorker! I guess, its the North East Accent :)
@cemdrahsan2702 жыл бұрын
Not only racing cars exhaust also the Tamiya Kawasaki H2R fuel tank and side cowlings.. (Blk Chrome) Thank you for your help!
@danielkaras90 Жыл бұрын
After spraying gloss black base, I noticed there are some dust particles trapped by paint. What would you recommend in such situation? Sand with high grit (which one?) sand paper? Strip and try again?
@timdodd9792 жыл бұрын
I just started trying Alclad. Bought at my local hobby shop, and made in USA. Support local businesses.
@jmelwak33 жыл бұрын
Love alclad man its some amazing stuff
@steve177cal53 жыл бұрын
I'm in England and my Alclad says made in uk on the bottle.. Great products thanks for the review and recommendations
@barbatosrex94733 жыл бұрын
Yes, it is made in the UK. They also have a US office in Tennessee. It's great paint that serves a specific purpose.
@RCrawlerLeon3 жыл бұрын
This paint can be used on polycarbonate ? the spoons already had a primer base? I really liked the ability to cover with few passes and the shine
@Pch100 Жыл бұрын
Colour me impressed 👌
@1b4dsrt2 жыл бұрын
Im so impressed.. holyy
@jamesgahan44063 жыл бұрын
I have glass globs with copper foil wrapped around edge. Can I spray the foil and then remove the paint from the glass without masking it off?
@orlandofontanez16872 жыл бұрын
It look great my question to you is those that paint work on soft plastic or rubber and don’t stay tacky or sticky
@ForestWoodworks Жыл бұрын
Wow! Pretty awesome 💯
@jamiesworkshop31983 жыл бұрын
Really great results!! I might have to start building car models again. Wow!
@barbatosrex94733 жыл бұрын
Thanks for watching, come back to the hobby, we'll be waiting for you. 😀
@jamiesworkshop31983 жыл бұрын
@@barbatosrex9473 Thank you! Your channel is great. I very much appreciate all the research and testing you put into evaluating paints and products. It certainly helps us average joes. I did come back to the hobby a few years ago, mostly building 1/35th scale tanks. I was heavy into car models in my younger years. The paint finish and chrome trim is so critical with car models. I'd like to get good enough to finally do that right.
@barbatosrex94733 жыл бұрын
@@jamiesworkshop3198 I love car models. In particular imports, being in the US getting imports when I was young was tough but now it's different. I just ordered a ton of kits directly from Japan and I'm going to start painting them using actual auto paint.
@matejgrofelnik33783 жыл бұрын
What size of the needle are you using? I used black chrome today and although the black base was perfect not there are some wierd dots on the chrome. The gloss is there just this texture is bothering me
@GunplaUniversity4 жыл бұрын
great video. i use alclad a lot but ive never tried the black chrome or the gloss black base. ill have to give it a try
@barbatosrex94734 жыл бұрын
It's as good as I say it is. You'll be pleased with your purchase for sure
@ianmason3133 жыл бұрын
Hi, could you tell me what size nozzle/ needle you are using to spray these please.
@e.esmenda3 жыл бұрын
Is it okay not to prime parts when using alclad gloss black base?
@stephentaylor1030 Жыл бұрын
I know this has been 2 years ago but, I thought I'd watch it again. The question is , Do you have to use the same paint product or can you use Tamyia's gloss black instead as the base color?
@wanderinlove2 жыл бұрын
Hello, wonder if this alclad chrome lacquer allow to spray over acrylic paint base or oil paint base?
@CARBON10 Жыл бұрын
Looks real great, would it work on headlight restoration, as in handle heat, the lens is plastic, the original chrome coating is very tired
@PB4UG02Bed5 ай бұрын
Any tips on this? I cant get mine to do that in 30 seconds. I end up using a lot of product to get something far less impressive. Im doing it at 13psi to 15psi range and I've tried far away, mid, and close up, but i end up with lots of imperfections, mostly long lines going up and down the spoon.
@annabellenordquist34202 жыл бұрын
These videos are so helpful! What would the alclad holomatic spectral chrome look like over the glossy black and chrome? If you ever did a video of that, that’d be sweet!
@barbatosrex94732 жыл бұрын
It looks awesome over any color. I love the stuff. I just in another brand of holomatic paint, I will do a comparison soon with all of them on different colors
@geoffreyprecht24102 жыл бұрын
This is it! Been doing a ton of research into chrome paints for my Warhammer minis, and this might just be the one for me. Now I just have to figure out how to apply it with an airbrush without it getting on anything else on the model...
@barbatosrex94732 жыл бұрын
Have you seen my video on Green Stuff World Chrome?
@geoffreyprecht24102 жыл бұрын
@@barbatosrex9473 Not yet, but I'll look into it! Alclad looks like it's better for my purposes than MIRROR paint from Culture Hustle USA looks nice and might be easier for hand brushing on, but I've been wanting an excuse to get into airbrushing anyway. I'm gonna weigh all my options before making a commitment though. Thanks for the recommendation and the great video!
@JeffOutEast Жыл бұрын
Great stuff! Did you keep the airbrush at 20 psi for the chrome/black chrome also?
@calvin148883 жыл бұрын
Not sure if u notice, I had already used three bottles of the Alclad gloss black base sometimes it has a tiny piece on the paint surface. It will on the paint surface once in a while. Not sure if anyone has this as well?
@NDWoj Жыл бұрын
I need to paint a set of white plastic guitar humbuckers chrome. The Alclad II 5114 Chrome for Lexan 3oz (aerosol) was recommended. I do not have a spray gun. What should I put underneath the Lexan? Will a regular gloss black primer/paint work? If so....does it need to be enamel, laquer, etc? Getting confused. Thanks!
@ninodino8040Ай бұрын
Can I use the white gloss primer? The store where I bought the paint only had the white primer and I wasn't aware that there are several
@paulcolterman3087 Жыл бұрын
Paul from NB Canada. I hear there are two separate Alclad chromes, new and old formula. Is this the newer one with the shinier label? Also how does this do up against Inspiration chrome paints? Thanks
@normanbeaulieu42042 жыл бұрын
Ok I need some help. I have been noticing while using Aqua clear for a gloss coat on Alclad chrome I’m loosing about 50% of its shine. What can I be doing wrong. I can never get it as clear and shiny as you do
@vebnew Жыл бұрын
WOW excellent chrome paint
@barbatosrex9473 Жыл бұрын
This is a great brand
@joe.the.collector2 жыл бұрын
Been trying this lately, on a perfect gloss black base but the struggling to get a nice Chrome finish, seems quite speckled, any ideas? Using a 0.3m nozzle at 15psi.
@bigcharliesmodelgarage2964 жыл бұрын
Nice . Thanks for sharing
@jackdurden466 Жыл бұрын
Damn! Pretty great results! I have to find out the best way to remove old flaking chrome from plastic, so I can refinish it. I probably am writing this early and I’ll be shown how maybe even in this video! Otherwise I’m sure that your channel will have a video on such a simple topic.
@kgee2111 Жыл бұрын
Caustic soda (lye) does it beautiful
@MSUICEMAN Жыл бұрын
does it stay mirrored when a clear top coat is applied?
@MagnusHammerstorm8 ай бұрын
Hey Rex, I've tried and tried to get this effect, I've nailed the gloss black, but every time I apply the chrome it's immediately foggy with no clarity at all. I've tried 5psi up to 30psi, near and far, and light mists to a real hosing down. Any tips? It just looks like brushed on aluminum to me
@genemaster742 жыл бұрын
i just picked up the Black Base ALC 305 paint code and a bottle of Mirrored Gold by Alclad ii Lacquers on a whim at my local hobby shop. i always watch ya vids before i use them,... after seeing this vid... the whole shake once or twice and pore",.... then "BANG instant perfect paint job its. This will be a good base for my Printed Bodys. Cheers m8 and have a good Weekend from Downunder!!
@FallenGemini3 ай бұрын
I used the Alcad gloss vlack once, but I hated it because it would get sticky afterwards. How would I prevent that? I also painted it during a very hot day.
@SpookyMontero6 ай бұрын
Would I be able to use a bunch of these bottles to spray my black grille chrome ?
@jasonm.9863 Жыл бұрын
Do you recommend spraying Alclad Chrome with a 0.3mm or 0.5mm?
@shovelhead4558 Жыл бұрын
Nice one how would that cover a 4” square area looks dam good 👍
@levonne766 Жыл бұрын
Wow! That's my hometown.👍👍
@chadwickhayes82602 жыл бұрын
Thanks for the video I’ve been looking for a black chrome for the mandalorian model it’s the right sheen
@laxur1312 Жыл бұрын
Couple of years late, but did you ever make that video about printing your own decals?
@chrispropst67787 ай бұрын
How long is the dry time on the Alclad? Can it be handled after drying,?
@erichadden77 Жыл бұрын
Can you mix candies with that chrome since they are a dye? I would love to find a blood red chrome or orange chrome .
@RONJON46331 Жыл бұрын
What type of air brush do you use as well as your airsource for spraying .
@chrisryan44923 жыл бұрын
Alclad II Lacquers was formed in 1999 in England. In 2001 U.K. production was supplemented with a facility in the U.S.A. and they now jointly serve the European, North American, Australasian and Far East markets.
@barbatosrex94733 жыл бұрын
Great info. I knew the US office was located in Tennessee but had no idea of their history. A fairly young company too
@chrisryan44923 жыл бұрын
@@barbatosrex9473 Thanks for the review.
@PopArow47029 ай бұрын
I am not sure but i do believe that between alclad and spaz stix I am hooked on them 😂😂😂
@yosielesmana32543 жыл бұрын
Can it be used for a rubber material like marvel legends stuff?
@thefuneralparade2 жыл бұрын
Can th black chrome be sprayed into a chrome finish and turn it smoky chrome or into black chrome that way?
@dunka123 жыл бұрын
Be careful with Alclad, the more layers you add, the foggier it is. So you could have stopped at 1 or 2 layers on the chrome. If you keep building it up, it starts to look like aluminium.
@barbatosrex94733 жыл бұрын
You are absolutely correct
@patrykkwiatkowski84743 жыл бұрын
Did you mean alunimum
@dunka123 жыл бұрын
@@patrykkwiatkowski8474 No. I meant Aluminium, as the metal, not the American misspelling. Do you call Cadmium, Cadmum too?
@patrykkwiatkowski84743 жыл бұрын
@@dunka12 it was a joke mate, the dude in the vid always says alunimum. r/woosh
@UnicronsLeftNut3 жыл бұрын
@@dunka12 Ah yes, that European snobbery poking it's ugly head up once again. Gotta love it.
@rynncarthis37393 жыл бұрын
Hey, I was wondering if that aqua gloss stuff holds up well against water. I'm making a full set of Mandalorian armor, and I plan on doing photoshoots out in the snow and rain. Also thank you for making this demo, it was very informative. I'm extremely new to airbrushing.
@barbatosrex94733 жыл бұрын
Aqua Gloss might not hold up to the elements. It's primarily for models. You might have to go with a 2K Gloss. It's made for automobiles and stands up to abuse. I'll be testing some 2K over the chrome soon so look out for that
@paulgertsch7105 Жыл бұрын
I'm heading to Hobby Town this week, hopefully they sell Alclad so I can pick some up.
@andreamassone1014 Жыл бұрын
Hello your video are very helpfull, but I'm not able everytime to obtain a chrome surface with alclad.... sometime works sometime not.... Today I tried to chrome two bike exhausts from aoshima and I used for base ts-14 by tamiya..... It was gloss like glass and dried 3-4 days.... tha alclad seemed to react on the black surface like thousand of micro drops..... the black surface was never touched after being painted. I had to cover the pieces with several layers af alclad so the chrome didn't turn out as good as it should have. I tried also with a cotton swab to polish the surface and this impruved the result but I noticed the paint disappeared in some spot.... so I have to airbrush another layer..... I also used green stuff chrome but it came out like alu..... Any tips? Temperature? I worked outside and today is almost cold....I'm goimng crazy..... :^)
@stefanblackadder5236 Жыл бұрын
Can the alclad chrome be sprayed over Tamiya gloss black?
@IcanCwhatUsay11 ай бұрын
What is the difference between Alclad II ALC-4107 and Alclad II ALC-107?
@G1JFC2 ай бұрын
Right I'm buying some Black Chrome now. For a project
@barbatosrex94732 ай бұрын
Great choice, one of my favorites
@tonytranter22712 жыл бұрын
Hi mate just watched the allclad chrome painting on your chanel they are amazing I do customizing to diecast where can I get the paints and which ones would u recommend I also want the blueing one regards tony
@user-ki4tl5kz4z4 ай бұрын
Go Jensen Button! Brawn GP, oh what a story! Besides the first f1 championship (1950, Alfa-Romeo, Giuseppe Farina), maybe I am wrong, but I think it was the first team to win constructors championship at their first attempt...And Ross Brawn said thank you very much Honda! I was rooting for the other guy, a guy named Rubens Barrichello...Cheers Mate
@barbatosrex94734 ай бұрын
It's a great story that should be made into a movie. I showed my wife a documentary about it on KZbin and she was blown away
@kevinmarkland18843 жыл бұрын
Very helpful, thanks!
@barbatosrex94733 жыл бұрын
👍
@jaimeramirez19863 жыл бұрын
Excelent tutorial is very easy and effective thanks for sharing
@barbatosrex94733 жыл бұрын
Your comments are much appreciated, thanks for watching. More chrome and metal paint tests coming this week
@patrickcowgill73423 жыл бұрын
I know the instructions for Alclad Chrome are pretty clear about using it on a gloss black surface, but I'm curious if I could still get the chrome effect over a very dark blue metallic coated in a high gloss lacquer clear coat. Also, if you spray the black chrome over a high gloss dark gray, would it be more chrome and less black chrome?
@barbatosrex94733 жыл бұрын
It works great over dark metallic blue. I actually tested it in one of my videos. I will be testing it on several different base colors in an up coming video
@endimontakarai11583 жыл бұрын
Hi i wanna question, u make thiner for paint?
@pinoyboy808 Жыл бұрын
Aloha, I have small plastic trimming that needs to be chrome. Can this product me brushed on? Primer and chrome? Thanks
@Drezzz152 жыл бұрын
Hi Barbatos Rex! I love your videos and your IG page. Super informative. Thank you for making all these videos because they've helped me a ton. I do have a question though. What if there is a haze after spraying? You mentioned in the video that you'd show how to buff the spoon or piece in order to increase the mirror finish. I also wish you showed us how the sword turned out after painting with the mirror finish since that is exactly what I am trying to achieve for my gundam weapons accessories i.e. Astray Red Frame swords. Would you happen to have any instructions on how to do the buffing process? Thanks again and Happy New Year! 😁👍👍
@thehotwheelshunter2 жыл бұрын
Please read need help and thanks So I paint 1/64 cars and I use molotow Chrome for a base for candy spectra flame paint and 2k automotive clear but been watching all your videos and love them got some alclad chrome to try out and the they turned out great but when I put the clear on the Is the black base color bleed through so I put a heavy wet coat on one to see what would happen and a lot of black bleed through I used splash blue clear and tru-color high gloss kandy apple red never had an issue with molotow should I use there clear over chrome or the paint any help be greatly appreciated thanks love your videos
@gefu5771 Жыл бұрын
does anyone know why my both chrome and black chrome came out foggy not like one in video thats soo shiny and reflectable
@husseinazeez40453 жыл бұрын
Thank you for the video With the chrome if you Wipe it with soft clothe gently after cure out it will go super shiny
@barbatosrex94733 жыл бұрын
True. I've done that since this video. Great paint